Přejít na hlavní obsah Přeskočit na vyhledávání Přeskočit na hlavní navigaci

Monitor O-126 V2

Informace o výrobku "Monitor O-126 V2"

This smart battery monitor checks the charge status of a 12V lead-acid battery or 12.8V lithium-ion battery. It also confirms whether the vehicle's charging system is functioning correctly via the standard Ø21mm AUTO and Ø12mm DIN plug.

Specifications:

- Length: 10/25 cm
- Battery connector (input): Ø21mm AUTO and Ø12mm DIN plug
- Charge connector (output): 2-pin SAE
- Operation: Two automatic modes – checking the battery's charge level (one flashing LED) and system test during charging (arrow mode).

- During vehicle storage: Four LEDs show the voltage range, from full to empty, of all 12V batteries, including AGM batteries with a higher voltage (fourth vv LED = 12,7 V); the LED corresponding to the charge level flashes every 3 seconds (long-term use below 0.2mA).

- When the engine is running: The LED arrow mode is activated when the charging voltage is at least 13.5V (v green LED) or within the ideal range of more than 14V (vv green LED).

- Cable: SPT-2W 18 AWG (0.82mm²)
- Use: Suitable for use at very low temperatures down to -40°C/-40°F, cable remains flexible at temperatures down to “below freezing”
- Style: Fully sealed electronics module with 4 LEDs, SAE charge connector with waterproof rubber cap

0 z 0 hodnocení

Průměrné hodnocení 0 z 5 hvězd

Zadejte své hodnocení!

Sdělte nám své zkušenosti s produktem s jinými zákazníky.

Napsat recenzi