Novatio AFX-150 Al-Fix 2K Tip (12PCS)
21,00 €excl. VAT
Ihned k dispozici, dodací lhůta 1-3 Days
Informace o výrobku "Novatio AFX-150 Al-Fix 2K Tip (12PCS)"
FILLING CA GLUE
Al-Fix 2K is a multifunctional 2-component cyanoacrylate glue that, thanks to its gel form, can also be used vertically without flowing out. Al-Fix 2K can be dosed precisely and applied very accurately when using the fine mixing tip.
Advantages
Filling capacity up to 5 mm.
Fast, even curing.
Also for vertical use.
Use
- Remove the closure caps from the cartridge, place the plunger and bring the components to an equal level.
- Attach the mixer tip and dispense 2 cm of product to ensure good mixing.
- Apply to a clean and dry substrate. If necessary, clean with Safety Clean and/or Multifoam.
- After an interruption of 2 minutes, use a new mixer tip.
- For storage: remove the mixer tip, clean the coupling system and close with the cap.
If in doubt, first test the adhesion. No adhesion on LSE plastics.
Pretreatment with Silfix Primer can improve adhesion on difficult plastics.
Technical specifications
- Composition: cyanoacrylate, 100% solids.
- Colour: transparent.
- Overpaintable: yes.
- Filling capacity: up to 5mm.
- Curing time: 3 min. Higher temperatures accelerate curing.
- Hardness: 56 shore D.
- Modulus 100%: high (>1 MPa).
- Processing temperature glue and substrate: min +5°C and max +40°C.
- Chemical resistance:
- poor: acids, alkali and water.
- moderate: solvents.
- good: oil.
- Temperature resistance: between -10°C and +40°C (peaks up to -40°C and +100°C).
- Shelf life: 9 months, stored between 2° and 10°C . Higher temperatures shorten the shelf life.