Přejít na hlavní obsah Přeskočit na vyhledávání Přeskočit na hlavní navigaci

Novatio Q-Fix 120 - cartridge 280ml

Informace o výrobku "Novatio Q-Fix 120 - cartridge 280ml"

STRONG AND FAST CHEMICAL ANCHORING

Q-Fix 120 is designed for chemical anchoring that is heavily loaded in hollow and solid materials such as stone, concrete, aerated concrete, ... . Q-Fix 120 is a waterproof and impermeable fixing. Q-Fix 120 is a vinyl ester resin that has the best mechanical properties and better chemical resistance. Q-Fix 120 also has all the necessary approvals: the European approval (ETA/ CE) option 7 for non-cracked concrete and a fire resistance class F120.

Advantages

Both in dry and damp drill holes, even under water, even down to -10°C.

Exceptionally chemical- and UV-resistant.

Anchors in both solid and hollow bricks, concrete blocks, Ytong, ... .

Extremely long shelf life, even opened.

Use

  • Drill holes according to the table.
  • Make the holes dust-free with a brush or Novair.
  • Use the cartridge at room temperature.
  • Turn the mixer tip onto the cartridge and dispense 10cm before use.

In solid stone:

  • Fill the drill hole from back to front.

In hollow stone:

  • The harpoon plug increases the effectiveness and reduces consumption.
  • Glass fabric such as the reinforcement fabric of Nova Power Grip is a handy alternative: roll up the fabric to the desired diameter, slide it into the drill hole and fill it from back to front.

  • Insert the threaded rod into the drill hole with a slight turning motion.
  • Smooth out excess product or let it cure and remove it later with hammer and chisel.

Storage options:

1. Remove the mixing tip and clean the cartridge nicely. Close the cartridge again with the accompanying screw.

2. Leave the mixing tip on the cartridge. At the next use, a new mixing tip can simply be fitted.

Technical specifications

  • Base: styrene-free vinyl ester resins.
  • Colour: grey.
  • Odour: low odour.
  • Temperature resistance after full curing: from -40°C to +80°C, with peaks up to +120°C.
  • Application temperature of the cartridge: +/- 20°C.
  • Storage temperature: 5 to max. 25°C.
  • Certificates: F120 and ETA.
  • Adhesion: very good adhesion to all porous materials, less good to poor adhesion on smooth surfaces.
  • Shelf life: 18 months, dry, cool and frost-free.
  • Safety measures: please consult the safety data sheet.

0 z 0 hodnocení

Průměrné hodnocení 0 z 5 hvězd

Zadejte své hodnocení!

Sdělte nám své zkušenosti s produktem s jinými zákazníky.

Napsat recenzi