Novatio S&B Sil 25 Opal 310ml
21,23 €excl. VAT
Ihned k dispozici, dodací lhůta 1-3 Days
Informace o výrobku "Novatio S&B Sil 25 Opal 310ml"
SWIMMING POOL REPAIR AND SEALING
This single-component, MEKO-free, neutral silicone is suitable for the structural and elastic sealing of expansion joints, seams, cracks and passages.
Advantages
Permanently stable.
High chemical resistance.
Practically odourless, bacteria- and mould-resistant.
Use
Processing temperature between +5°C and +40°C.
Apply to a clean and stable substrate. Clean with Safety Clean and/or Multifoam if necessary. Finish using Seal & Bond Finisher.
Apply with a manual or pneumatic gun (best with a telescopic plunger).
Test adhesion on plastics, powder coatings, exotic wood species and bituminous materials. First reinforce weak and/or porous substrates with Fixapox.
Swimming pool application: allow to cure for at least 7 days before contact with chlorinated water.
Ideal glue thickness for optimum strength when bonding: 3mm.
Jointing and sealing:
Minimum joint width: 4mm.
Maximum joint width: 25mm.
Maximum joint depth: 10mm.
Joint ratio:
joint width in mm: 5 10 15 20 25.
joint depth in mm: 5 6 10 10 10.
If necessary, bring the joint to the correct depth with a convex backing rod.
Not paintable.
Technical specifications
- Base: MEKO-free neutral silicone.
- Form: elastic paste.
- Appearance: colourless glossy.
- Skin formation (23°C 50% RH): 15 minutes.
- Tack-free (23°C 50% RH): 10 minutes.
- Through-cure (23°C 50% RH): 2mm/24h.
- Volume shrinkage: after curing <4%.
- Tensile strength: 130N/cm².
- Hardness: (ISO 868) 25 Shore A.
- Thermal stability: -40°C to +150°C.
- Processing temperature: +5°C to +40°C.
- Adhesion: excellent with the exception of PE-PP-Teflon-Bitumen.
- Elongation at break: 700%.
- E-modulus: 100% 0.32 MPa.
- Overpaintable: not overpaintable.
- Mould- and bacteria-resistance after curing: 1 (highest class).
- Shelf life: minimum 12 months.
- Safety measures: Please consult the safety data sheet.