Novatio Seal & Bond MS Construct white - cartridge 290ml

HIGH-TECH CONSTRUCTION ADHESIVE FOR BONDING AND ASSEMBLING

This MS Polymer has an extremely fast and super-strong initial adhesion on the most diverse materials. This solvent- and isocyanate-free assembly adhesive has a super high tensile strength and shows no signs of ageing. Seal & Bond MS Construct is neutral and also acid-free, allowing it to be used on the most diverse materials, even on natural stone. Seal & Bond MS Construct allows adhesive beads of 40 mm in height to be applied without deforming.

Advantages

Applicable both indoors and outdoors, even on moist substrate.

Superior initial adhesion, without sagging.

Extreme tensile strength 23 kg/cm².

Fast through-cure and overpaintable.

Use

• Service temperature +5°C to +40°C.
• Apply the adhesive on one side in dots or beads, on a clean substrate. Clean with Safety Clean and/or Multifoam if necessary.
• Press the bond firmly together.
• Due to the high initial adhesion, support is usually unnecessary (test first).
• Finish adhesive seams with Safety Clean.
• Adhesive residues are easy to finish off with Safety Clean.

Technical specifications

• Base: MS polymer.
• Colour: white or black.
• Odour: neutral.
• Specific gravity: 1.5.
• Viscosity: Paste.
• Shore hardness (DIN 53505) after 3 weeks at 23°C/50% relative humidity: 60 shore A.
• Shrinkage (DIN 52451) < 5%.
• Density (DIN EN 27390): does not sag up to a 40 mm thick seam.
• Elongation at break (DIN 53 504): 300%.
• Tensile strength (DIN 53504): 2.3 N/mm².
• Skin formation: +/- 5 min.
• Through-cure time:
  • 24h - 2.5 mm
  • 48h - 3.5 mm
• Temperature resistance: -40°C to +90°C .
• Processing temperature: from +5°C to +40°C.
• Chemical resistance:
  • good: water, salt water, aliphatic solvents, oils, greases, diluted organic acids and alkalis
  • moderate: ester, ketones and aromatics
  • poor: concentrated acids, chlorinated solvents
• Weather resistance: perfect.
• Attention: First test adhesion on substrates based on PE, PP, silicones, teflon, ... .
• Shelf life: 12 months.
• Safety measures: please consult the safety data sheet.