Novatio Thermoflux MPM - 100cm - 115mm - 34mm
191,26 €excl. VAT
Ihned k dispozici, dodací lhůta 1-3 Days
Informace o výrobku "Novatio Thermoflux MPM - 100cm - 115mm - 34mm"
BLACK DUAL- AND THICK-WALL HEAT-SHRINK TUBING
Thermoflux MPM is a semi-flexible, thick-wall heat-shrink tubing whose inner wall consists of a meltable adhesive layer, developed to permanently provide a watertight seal for a wide variety of applications. The inner wall melts when heated and penetrates every gap as the outer wall shrinks, so that after cooling the whole forms a strongly protective, watertight sheath. A processing temperature of -60°C to 145°C and a standard shrink ratio of 3/1 means the tubing offers excellent environmental protection to a large range of irregular shapes of different sizes.
Benefits
Insulation, sealing and protection.
Outer wall shrinks - inner side melts and seals completely.
Excellent resistance to chemicals, acids and soil alkalis.
Flame-retardant and UV-resistant.
Use
- Choose the correct diameter.
- Heat with a gas torch or hot-air blower.
- Press together with pliers if necessary.
Technical specifications
- Processing temperature: -60 + 145°C.
- Shrink temperature: 135°C.
- Shrink ratio: 3/1.
- Tensile strength ISO 37:18.6 MPa.
- Elongation at break ISO 37:400%.
- Flexibility: semi-flexible.
- Dielectric strength IEC 243:14 MV/m (VDE 0303 P12).
- Flammability ASTM D 876, ASTM D 2871: Inner wall: no. Outer wall: yes.
- Water absorption ISO 1817 and ISO 37
- Immersion 24h at 23°C: hydraulic fluid: good; Kerosene F40: good; Lubricating oil O 149: good; Diesel oil F54: good.
- Volume resistance: 1016Ohm/cm.
- Shelf life: 60 months, dry, cool and frost-free.