Novatio Topflux - 9,5mm - yellow - 50pcs

CONNECTING, SOLDERING, INSULATING AND SEALING MULTIPLE CONDUCTORS

• For electrical connections in applications where no compromises can be allowed in terms of quality, reliability, service life and watertightness.
• Is extremely easy to install, the quality of the connection can be checked visually, no special tools are needed for installation and three sizes are sufficient for total cable thicknesses from 0,7 to 12 mm.
• Applicable to braided, flexible conductors, both in copper and tinned versions, whether or not in combination.
• The shrink sleeve is flame-retardant kynar polymer with a high insulating capacity. The end is perfectly sealed with a ceramic ball. Inside is a spiral of square-drawn copper wire to twist the conductors into. The tin solder ring with built-in flux, which sits around the copper cone, ensures a firm connection without voltage loss. The sealing ring of thermoplastic adhesive completely seals the whole.

Benefits

Watertight connection of flexible conductors.

Provides perfect watertight connections.

Visual inspection of the connection through the transparent insulation.

Temperature resistant from -60°C to 130°C.

Use

Determine the correct size: the given diameters are the outer diameters of the wire bundle to be connected, measured over the insulation.

• red: 4,5 mm
• blue: 7 mm
• yellow: 9,5 mm

Strip the conductors to 15 mm.

Use a heat source such as the Novaflame Multi Torch, fitted with a deflector.

• Slide the conductors into the Topflux and turn it a full turn for a mechanical connection.
• Heat the Topflux, starting at the copper cone, until the solder ring flows between the wires. Continue heating for 6 seconds after the solder has flowed out.
• Heat the sealing adhesive until it seals the cables.
• Allow to cool.

Technical specifications

• Top seal: ceramic ball - colour coding.
• Outer wall: flame-retardant kynar polymer.
• Solder ring: Sn 60 / Pb 40 with integrated flux.
• Sealing ring: heat-melting adhesive.
• Copper spiral: spiral of square-drawn copper wire, increased mechanical resistance.
• Voltage loss: < 0,002 V.
• Connection resistance: < 0,004 Ohm.
• Electrical resistance: 109Ohm.
• Installation temperature: 143°C.
• Temperature resistance: -60°C to +130°C.
• Breakdown voltage: > 600V : < 0,002 V.
• Certificates: CEBEC and IP68 KEMA approval.
• SCIP no. Topflux Red:

734bc69a-7c01-4206-b0fa-5d4a75776b24

• SCIP no. Topflux Blue:

3ea5fe32-ed12-4d9f-bdc1-871f63648032

• SCIP no. Topflux Yellow:

eeec994f-60d7-4717-a23a-5878e5cdae45