Přejít na hlavní obsah Přeskočit na vyhledávání Přeskočit na hlavní navigaci

Polishing compound PROFILINE CutMax 1L

Informace o výrobku "Polishing compound PROFILINE CutMax 1L"

Strongly abrasive polishing paste, removes scratches and inclusions from painted parts or original factory paintwork. Leaves minimal processing marks and almost no polishing residue. Easy to process. High material removal with minimal matting at the same time. Removes sanding marks from P1000 sandpaper.

- Shake the bottle before use.
- Apply the product to the SONAX hard foam pad or the SONAX lambswool pad and polish at low speed and increased pressure for approx. 10 seconds; the machine may tilt slightly for deep scratches.
- Then polish for approx. 20 seconds with little pressure, laying the sponge flat.
- Then place new product on the pad and carry out a new polishing cycle.
- The specified times refer to an average hard paint layer and a surface to be polished of approx. 50 x 50 cm.
- Remove polishing residue with a SONAX microfibre cloth, ultra-fine.
- Then finish with SONAX PROFILINE Perfect Finish.

NOTE: Do not heat the polishing area. Clean polishing pads regularly and never use different polishing compounds on one pad.

0 z 0 hodnocení

Průměrné hodnocení 0 z 5 hvězd

Zadejte své hodnocení!

Sdělte nám své zkušenosti s produktem s jinými zákazníky.

Napsat recenzi