Analogue battery tester 12V with accessories
93,41 €incl. VAT
77,20 €excl. VAT
Ihned k dispozici, dodací lhůta 1-3 Days
Vlastnosti
Značka
OptiMate
Čísla článků
252015
Informace o výrobku "Analogue battery tester 12V with accessories"
The ultimate pocket-size tester for testing the performance and alternator voltage of batteries fitted in the vehicle, which every maintenance mechanic and technician should have!
Easy to use! Place the clamps on the battery or connect to an installed SAE battery cable, and then proceed as follows:
1.Check the battery's charge level. A battery with low voltage gives weak starting performance.
2.Start the engine. The OptiMate TEST captures and displays the lowest starting voltages (for 20 seconds).
3.While the engine is running, check the starting voltage of the alternator and the voltage regulator.
TIP: A low charging voltage results in weak battery performance. A charging voltage that is too high causes excessive gassing and ultimately leads to damage to the lead-acid battery. A charging voltage that is too high is FATAL for a LiFePO4 starter battery!
•Accuracy via microprocessor.
•Easy-to-follow instructions on the back of the tester.
•2-pin SAE connector conforming to the industry standard.
•Battery clamp set of 40 inch/100 cm.
•Fully sealed.
A high-quality tester designed by TecMate. 3-year limited replacement warranty.
Easy to use! Place the clamps on the battery or connect to an installed SAE battery cable, and then proceed as follows:
1.Check the battery's charge level. A battery with low voltage gives weak starting performance.
2.Start the engine. The OptiMate TEST captures and displays the lowest starting voltages (for 20 seconds).
3.While the engine is running, check the starting voltage of the alternator and the voltage regulator.
TIP: A low charging voltage results in weak battery performance. A charging voltage that is too high causes excessive gassing and ultimately leads to damage to the lead-acid battery. A charging voltage that is too high is FATAL for a LiFePO4 starter battery!
•Accuracy via microprocessor.
•Easy-to-follow instructions on the back of the tester.
•2-pin SAE connector conforming to the industry standard.
•Battery clamp set of 40 inch/100 cm.
•Fully sealed.
A high-quality tester designed by TecMate. 3-year limited replacement warranty.
Nebyly nalezeny žádné recenze. Sdílejte své postřehy s ostatními.