Nabíjecí kabely & adaptéry

Cable:16AWG 1.31MMConnector 1:SAEConnector 2:OPTIMATE CLIPSLength:20 / 50CMStarts temperature:-40°F / -40°C

cable with red and black clamps

automatic charger 12v/1.5-10aInput: 230V AC ~ 50HzOutput: 1.5 / 10A 12VBattery charging range capacity (1.5 MODE): 2.3AH - 30AH Battery charging range capacity (10 MODE): 30AH - 200AH - 200AH Battery charging range CCA: 10CCA - 1000CCA Minimum starting voltage: 2VDimensions: 210 mm x 98 mm x 60 mm x 60 mmWeight: 0.88 kgBattery technology selection function (AGM , AGM , AGM SPIRAL , AGM , SLI , EFB , CALCIUM , VRLA , GEL BATTERIES , LITHIUM INCLUDING LIFEPO4 ).Reverse polarity protectionOver-temperature protectionShort-circuit protectionSpark-free protectionIngress protection rating: IP65

This trickle charger has a microprocessor that ensures the connected battery is automatically monitored and charged. In addition, the battery charger is protected against short circuits and reverse polarity.Specifications:• Voltage: 12V• Charging current: 4A• Charging capacity: 7ah - 100ah• Maintenance capacity: 7ah - 160ah• Microprocessor with 8-step charging process• Compatible batteries: WET, AGM, GEL, MF, Start & Stop• Dimensions: 190x110x60mm• Energy-efficient• Certification: CE• LED charge status indication• Mounting hook• Protective bumperMicroprocessor functions:• Reverse polarity protection• Short-circuit protection• Packaging: Box + charger + battery clamps + ring adapter

With this adapter from OptiMate you can easily reverse the polarity of your SAE 2-pin connector on your standard solar panel or the wiring of your vehicle accessory.Use this adapter to convert any industry-standard SAE 2-pin connector to fit your OptiMate. It contains 2 weatherproof SAE rubber seals and has been tested to industry-standard durability. Built to last, then! It is also ideal for use in the toughest environments. Even at a low temperature of -40°C/-40°F it stays flexible!Specifications:- Length: 6 inch/15 cm- SAE 2-pin connector to industry standard- Maximum current: 10 A- Suitable for use at very low temperatures down to -40 °C/-40 °F, cable stays flexible at temperatures down to “below freezing”.- Includes built-in rubber seal for OptiMATE heavy-duty SAE connector- High-quality cable designed by TecMate- 3-year limited warranty

The world’s most advanced battery charger for starter & deep-cycle 12V batteriesOptiMate 6 Select is perfect for 12 V start and deep-cycle batteries that require precise temperature-controlled charging and long-term unattended maintenance. When selecting the voltage (14.4 V / 14.7 V), a safety check is performed to ensure the battery is charged at the correct voltage. Special feature: POWER SUPPLY delivers stable power for reprogramming a vehicle system, demonstrating a showroom model or retaining stored settings when battery cables are disconnected to connect powered accessories or to replace the batteryCHARGE CURRENT : 6A (Ampmatic) @ 14.4V / 14.7V / 4A@ 13.6VUSE: Indoor / Outdoor (lowest temperature: -40°F / -40°C).RECOVERY : Starts from a low voltage of 0.5V + 2-stage desulphation recovery.IDEAL FOR: STD, AGM, GEL & Deep Cycle 12V batteries from 3 – 240Ah.INPUT CURRENT: Universal (100-240V 50-60Hz), high efficiency (CEC approved), fully sealed.DESIGN : Weatherproof housing with wall mounts, a 6 ft/180 cm AC cable and a 6 ft/180 cm charge cable with SAE connector as end. Weatherproof battery cable and standard set of battery clamps included.SAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shutdown in the event of a short circuit or when the battery is disconnected. 3-year limited replacement warranty.

Socket - SAE - weatherproof - panel mountLength = 100 cm / 40?Front-panel mounting, fastening at the rear, for panels with a thickness of 1 mm / 0.040? or more.Standard 2-pole SAE connectorMax. cable capacity: 5 AmpUse at very low temperatures -40°C/-40°F; stays flexible at temperatures below freezing.

Y-splitter - DC2.5 connector to 2x DC2.5 socketsLength=12 inch/30 cm2 DC inputs of 2.5 mm1 DC plug of 2.5×5.5 mmMaximum cable current: 10 AmpSuitable for use at very low temperatures down to -40 °C/-40 °F, cable stays flexible at temperatures down to “below freezing”.

5Amp extension cable for battery charge cable with weather- and dirt-resistant SAE connection system.Length=15 ft/460 cmSAE 2-pin connector to industry standardMaximum cable current: 5 AmpSuitable for use at low temperatures down to -20 °C/-4 °FIncludes built-in rubber seal for OptiMATE heavy-duty SAE connector.

OptiMate 2 DUO, the powerful “no brainer” battery charger-maintainer for the hi-tech battery in all your vehicles – Guarantees healthy lithium or lead-acid batteries!CHARGE VOLTAGE: Nominal: 12V & 12.8V range: 4V – 14.4VOPERATION: Fully automaticSTEPS: 5INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).STYLE: Weatherproof housing with wall mount, with 6ft / 180cm AC power cable and 6ft / 180cm charge cable with SAE connection at the end.SAFE: No risk of overcharging. Completely safe for vehicle electronics. Suppresses sparks. Safe for long-term battery maintenance. Automatic shutdown in the event of a short circuit or disconnection of the battery.INCLUDED: Water-resistant battery charger and battery clip setWARRANTY: 3-year limited replacement warranty.Ideal for 12V lead-acid and 12.8V / 13.2V lithium LFP (LiFePO4) batteries.Delivers a constant 2 Amp charge current recommended for maintaining larger batteries.Charges and provides long-term maintenance – Connect to the battery and the OptiMate 2 DUO does the rest, no supervision required!More features:Automatically adapts to Pb or LFP battery. Safe to stay connected. Full electronic protection.Keeps the battery at full charge & good health.Starts from a low voltage of 4V.Warns when battery damage is detected.Energy-saving technologyv Stand-by power less than 0.5W.v Efficient 24-7 battery maintenance.Weatherproof. Suitable for use down to -40°C / -40°F.

Cable - tank bagLow profile with a 90° angle with M14 threaded bush and nylon nut (9/16? / 14 mm hole required).Custom seals for ROUND (e.g. Wunderlich) or OVAL (SW Motech) ‘crosshair’ power inputs, and for hard case walls.External 2-pole SAE connector with in-line waterproof seal for optional OptiMate cable adapter.Internal 2-pole SAE connector / adapter for USB or other device.

The world’s most advanced 10 A battery charger for start and deep-cycle batteries!OptiMate 7 Select is perfect for 12 V start and deep-cycle batteries that require precise temperature-controlled charging and long-term unattended maintenance. When selecting the voltage (14.4 V / 14.7 V), a safety check is performed to ensure the battery is charged at the correct voltage. Special feature: POWER SUPPLY delivers stable power for reprogramming a vehicle system, demonstrating a showroom model or retaining stored settings when battery cables are disconnected to connect powered accessories or to replace the batteryCHARGE CURRENT: 10A (Ampmatic) @ 14.4V / 14.7V / 8A @ 13.6VUSE: Indoor / Outdoor (lowest temperature: -40°F / -40°C).RECOVERY: Starts from a low voltage of 0.5V + 2-stage desulphation recovery.IDEAL FOR: STD, AGM, GEL & Deep Cycle 12V batteries from 3 – 240Ah.INPUT CURRENT: Universal (100-240V 50-60Hz), high efficiency (CEC approved), fully sealed.DESIGN: Weatherproof housing with wall mounts, a 6 ft/180 cm AC cable and a 6 ft/180 cm charge cable with SAE connector as end. Weatherproof battery cable and standard set of battery clamps included.SAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shutdown in the event of a short circuit or when the battery is disconnected. 3-year limited replacement warranty.

OptiMate Solar + 60W Solar Panel6-step 12V 5A sealed solar battery-saving charger & trickle chargerCHARGERescues empty batteries from just 1 volt thanks to its unique pulse action. The fastest way of charging – thanks to the ‘smart charge’ control that chooses pulse charging or continuous charging depending on the strength of the sunlight. Intelligent maintenance – continues the next day if the battery held the charge overnight; if not, the programme moves on to the OPTIMISE step.MONITORBattery status is shown every 3 seconds. Notification that the battery is ready for STD and high-performance AGM batteries. Consumes less than 0.5 mA during monitor mode. Automatically switches to CHARGE when there is sufficient solar energy.MOUNTINGThe OptiMate charge controller is separate from the panel and can be placed close to the vehicle or the battery, so that the charging progress and the maintenance of the battery can easily be monitored. The solar panel must be mounted so that it receives direct sunlight. The range/distance between battery and panel is 315 cm/124?. Use the OptiMate extension cables O-03, O-13 or O-23 to connect the solar panel to the OptiMate charge controller over a longer distance.External dimensions, including corner mounting brackets : Width = 64.8 cm / 25.5? Height = 68.5 cm / 27 ” Depth = 3.3 cm / 1 1/4“ Solar panel:POWER: 60 watt (max.)VOLT: 12V nominal, 22V maximum.USE: Outdoor / indoor.STYLE: Weatherproof, aluminium frame with 4 mounting brackets, output cable 200 cm / 80? with SAE connector.OptiMate charge monitor:CHARGE AMPS: 5A from 60 W panel (max. average current), 3-5A pulse current.USE: Indoor / outdoor (lowest temperature: -4°F / -20°C).RECOVERY: starts from a low voltage of 1VIDEAL FOR: STD, AGM and GEL 12V batteries between 2-240Ah.INPUT: 15 – 22VSTYLE: Weatherproof charge monitor housing.INCLUDED: Weatherproof battery cable and standard set of battery clamps included 60W solar panelSAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shutdown in the event of a short circuit or when the battery is disconnected.WARRANTY: 3-year limited replacement warranty.

Set of measuring pins with a unique slotted shape for connection to the end of cables of an electrical system. The slotted shape prevents damage to seals. • Supplied as standard with IgnitionMate (1 set) and IgnitionMate DUO (2 sets). • Small and large slotted shape for connection pins of various sizes. • Works with electrical test connector of 4 mm diameter. • 2-year limited warranty. High-quality accessory for TecMate diagnostic equipment.

The OptiMate MagCode ensures a fast, safe and easy battery charger connection. Attach the magnet to its counterpart on the battery and (re)charge without using clamps. This magnet should be attached to the battery charger via the SAE connector. This quick connection is suitable for indoor and outdoor use (down to -40°C).Specifications:• Magnetic charge connector• MagCode system• Cable protection• Voltage: 12V• Cable length: 75cm• SAE charge connector• Operating temperature: down to -40°C

Convert your old TecMate or British battery charger cable into an SAE connector with weatherproof cover and cap.•Length=6 inch/15 cm•The 2-pole KET connector with locking clip converts to an SAE 2-pin connector to industry standard•Maximum cable current: 5 Amp•Suitable for use at very low temperatures down to -40 °C/-40 °F•Includes rubber cap and seal for OptiMATE SAE connector.High-quality cable designed by TecMate. 3-year limited warranty.

Convert your old TecMate or British battery charger in order to connect an OptiMATE (or other SAE) permanent battery cable.Length=6 inch/15 cmThe KET/TM/British 2-pin connector converts to an SAE 2-pin connector to industry standardMaximum cable current: 5 AmpSuitable for use at very low temperatures down to -40 °C/-40 °F

The OptiMate PRO-4 DUO is an automatic diagnostic battery charger for 4x 12V lead-acid batteries and/or 12.8V LiFePO4 batteries (Lithium Iron Phosphate). This trickle charger offers a choice of 3 functions: charge mode for 12 V lead-acid, charge mode for 12.8 V LiFePO4 or a shortened programme with a limited charge time of 60 minutes. It is suitable for first-time charging/activation of a new battery or a quick recharge of a healthy used battery with a voltage of 11.4V or higher. Specifications:- Input: 100-240 V, 50-60 HZ- Output: 12V, 5A- CE certification- Class 2 AC cable, O-43 extension cable 180cm and O-14 fused battery clamps included- IP40Use:- Select the correct charge mode for deeply discharged Pb/lead-acid batteries or LFP/LiFePO4 batteries or LFP/LiFePO4 batteries that require a BMS reset.

OptiMate Solar DUO + 10W Solar Panel6-step 12V / 12.8V 0.83A sealed solar battery-saving charger & trickle chargerCHARGERescues empty batteries from just 4 volt thanks to its unique pulse action. The fastest way of charging – thanks to the ‘smart charge’ control that chooses pulse charging or continuous charging depending on the strength of the sunlight. Intelligent maintenance – continues the next day if the battery held the charge overnight; if not, the programme moves on to the OPTIMISE step.MONITORBattery status is shown every 3 seconds. Notification that the battery is ready for STD and hi-performance AGM batteries and Lithium LFP batteries. Consumes less than 0.5mA during monitor mode. Automatically switches to CHARGE when there is sufficient solar energy.MOUNTINGThe OptiMate charge controller is separate from the panel and can be placed close to the vehicle or the battery, so that the charging progress and the maintenance of the battery can easily be monitored. The solar panel must be mounted so that it receives direct sunlight. The range/distance between battery and panel is 315 cm/124. Use the OptiMate extension cables O-03, O-13 or O-23 to connect the solar panel to the OptiMate charge controller over a longer distance.External dimensions, including corner mounting brackets: Width = 24.9 cm / 9.8 ” Height = 37.6 cm / 14.8 ” Depth = 2.6 cm / 1 ”Solar panel:POWER : 10 Watts (max.)VOLTS : 12V / 12.8VUSE : Outdoor / indoor.STYLE : Weatherproof, aluminium frame with 4 mounting brackets, output cable 200 cm / 80? with SAE connector.OptiMate charge monitor:CHARGE AMPS : 0.83A from 10W panel (max. average current), 3-5A pulse currentUSE : Indoor / outdoor (lowest temperature: -4 °F / -20 °C).RECOVERY : starts from a low voltage of 4VIDEAL FOR : STD, AGM and GEL 12V batteries from 2 – 240 Ah and lithium LFP batteries of 12.8V/13.2VINPUT : 15 – 22VSTYLE : Weatherproof charge monitor housing.INCLUDED: Weatherproof battery cable, standard set of battery clamps & 10W solar panelSAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shutdown in the event of a short circuit or when the battery is disconnected.WARRANTY: 3-year limited replacement warranty.

Extension cable KET to KETSpecifications: Length: 180cmMaximum charge current: 5ATM-73

The world’s most advanced fully automatic 12V battery charger! The OptiMate 6 recovers batteries that other chargers can no longer save, because the OptiMate 6 sees the difference between an empty battery that needs charging and a fully discharged sulphated battery that needs recovering. Perfect for months of maintenance of any 12V lead-acid battery, such as deep-cycle batteries, batteries for cars, pleasure craft, motorcycles, … Multi-stage desulphation: Recovers neglected batteries from 0.5 voltAmpmatic charge control: adjusts the current to each battery size (3 to 240 Ah) OR battery status for the fastest and most complete chargeCell voltage balance mode: correctly prepares NEW batteries for first use and optimises battery performanceDaily battery status tests and interactive trickle charging: keeps the battery fully charged for weeks or months.•CHARGE CURRENT: 6 A (Ampmatic)•USE: Indoor/outdoor (lowest temperature: -40 °F/-40 °C).•RECOVERY: Starts from a low voltage of 0.5 V and two-stage desulphation recovery.•IDEAL FOR: STD, AGM and GEL 12 V batteries between 3 – 240 Ah•INPUT CURRENT: Universal (100-240 V 50-60 Hz), high efficiency (CEC listed), fully sealed.•DESIGN: Weatherproof housing with wall mounts, a 6 ft/180 cm AC cable and a 6 ft/180 cm charge cable with SAE connector as end. Weatherproof battery cable and standard set of battery clamps included.SAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shutdown in the event of a short circuit or when the battery is disconnected. 3-year limited replacement warranty.Ampmatic explained:

This 3300mA weatherproof USB charger can charge up to 2 mobile devices at the same time. This lets you charge a combination of your mobile phone, GPS system, camera or tablet via your BMW, TRIUMPH or Ducati MS motorcycle with a standard MOTOR(DIN) connection.Specifications:- Charge connector (input): 180° standard MOTOR plug of Ø12mm- Power (input): 12V system of the vehicle with 12V lead-acid battery or 12.8V lithium battery- Charge connector (output): 2x USB (1x USB-A & 1x USB-C)- Power (output): 3300mA- Style: Fully sealed electronic housing with a blue LED. Unique seal with cap for the USB connection. Any USB cable is sealed when plugged in.Operation: fully automatic:- Protection of the vehicle battery: USB output shuts off immediately 1 hour after the ignition is switched off or when the charge level in the battery drops below 12.4V.- Active when the voltage of the vehicle battery exceeds 13.3V.- Short-circuit, overheating, overvoltage protectionOperation (Voltage:- USB ON - 13.3V to 18V – unlimited USB output, USB LED on. Delivers power via USB when the vehicle engine charges the battery.- USB 1 HOUR - 12.4V to 13.3V – 1 hour USB output, USB LED on. Goes into standby mode after 1 hour or at voltage < 12.4V.- STANDBY MODE – Monitoring the voltage, becomes active again when the voltage of the vehicle battery again exceeds 13.3V.- SWITCHED OFF = 9V

10A extension for charge cable, weather/dirt-protected SAE connection system.Specifications:- Length: 180 cm- Connectors: SAE to SAE- Cable class: 16AWG (1.31 mm²) SPT2-W- Use: -40°C/-40°F low-temperature use- Design: Includes an in-line rubber seal for OptiMate heavy-duty SAE connector

Adapter SAE to XLR for charging a 24V batteryAdjust your OptiMate 24V battery charger to optimise the performance of the 24V battery of your equipment!Specifications:- Length: 30 cm- Connectors: SAE to XLR 3-pin connector- Cable class: 16AWG (1.31 mm²) SPT2-W- Use: -40°C/-40°F low-temperature use- Design: Includes in-line rubber seal for OptiMate heavy-duty SAE connector