The castle nut is a lockable fastening component for JLG machines and vehicles.The castle nut is secured together with a split pin so the connection cannot vibrate loose, which is important for safety connections such as steering and axle parts. In case of damaged thread, replace the nut.Lockable nut with split pin slotsJLG fastening hardwareOriginal part.
This Castle nut is a part for forklifts and material handling.Together with a bolt, this nut provides a firm and reliable fastening of parts.Reliable fastening materialFor forklifts and material handlingSuitable as a replacement for the original part
The Genie center bolt (ref. GE32475) is a fastening part for Genie machines.The center bolt connects and centres two parts and thereby carries the load of the connection. A worn or damaged bolt should be replaced to maintain a safe, sturdy fastening.Original Genie part (center bolt)For fastenersAlso known under reference: GE32475
The Genie centre bolt (ref. GE47255) is fastening material for aerial work platforms.A centre bolt forms a strong, detachable connection between parts. In case of wear, corrosion or loss, replace the bolt to keep a safe assembly.Centre bolt for aerial work platformsStrong, detachable connectionArticle number: GE47255
The JLG centre bolt (ref. JLG0630495) is fastening hardware for aerial platforms.A centre bolt forms a strong, detachable connection between parts. In case of wear, corrosion or loss, replace the bolt to maintain a safe assembly.Centre bolt for aerial platformsStrong, detachable connectionItem number: JLG0630495
The centre bolt is a fastening component for JLG machines.The centre bolt centres and fastens parts relative to each other, for example on a wheel suspension or spring pack. In case of wear or damaged thread, replace the bolt.Centring and fastening boltJLG fastening hardwareOriginal part.
The centre bolt is a fastening component for JLG machines.The centre bolt centres and fastens parts relative to each other, for example on a wheel suspension or spring pack. In case of wear or damaged thread, replace the bolt.Centring and fastening boltJLG fastening hardwareOriginal part.
The Genie circlips (retaining ring, ref. GE32499) is a locking part for Genie machines.The circlips secures a shaft or part axially and prevents it from sliding out of its position. In case of deformation or wear, replace the retaining ring to maintain a secure, play-free fixation.Original Genie part (retaining ring / circlips)For fastenersAlso known under reference: GE32499
The JLG circlip (ref. JLG130029) is a retaining part for aerial platforms.A circlip or retaining ring holds a shaft or bearing axially in place and prevents the part from sliding off. If lost or deformed, replace the retaining ring to maintain a secure assembly.Circlip / retaining ring for aerial platformsRetains shafts and bearings axiallyArticle number: JLG130029
The JLG circlip (ref. JLG1380150) is a retaining part for aerial platforms.A circlip or retaining ring holds a shaft or bearing axially in place and prevents the part from sliding off. If lost or deformed, replace the retaining ring to maintain a secure assembly.Circlip / retaining ring for aerial platformsRetains shafts and bearings axiallyArticle number: JLG1380150
The JLG circlip (ref. JLG1380153) is a retaining part for aerial platforms.A circlip or retaining ring holds a shaft or bearing axially in place and prevents the part from sliding off. If lost or deformed, replace the retaining ring to maintain a secure assembly.Circlip / retaining ring for aerial platformsRetains shafts and bearings axiallyArticle number: JLG1380153
The circlip (retaining spring) is a locking component for JLG machines.The circlip (retaining ring) secures a part axially on a shaft or in a bore so it cannot shift. In case of deformation, replace the circlip.Axial retaining ringJLG fastening hardwareOriginal part.
This Circlips is a part for forklifts and material handling.The circlip holds a part axially in place and prevents unintended shifting on the shaft or in the bore.Axial retention of partsFor forklifts and material handlingSuitable as a replacement for the original part
The circlip is fastening material for forklifts and material handling.A circlip axially secures a shaft or part so it cannot shift. When mounting or overhauling, replace the circlip for a safe, firm fastening.Circlip (retaining ring)For forklifts / material handling
The circlip (retaining ring) is a circlip / retaining ring used as fastening material.The circlip secures a shaft or part axially in a groove so it cannot shift. As a small but essential part, you use it to replace a worn or missing retainer.Fastening / retaining componentFor material handling / vehiclesSuitable as a replacement for the original part
The circlip is fastening material for forklifts and material handling.A circlip secures a shaft or part axially so that it cannot shift. During assembly or overhaul, replace the circlip to guarantee a safe, secure fastening.Circlip (retaining ring)For forklifts / material handling
