Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (74 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (74 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Lagers & bussen

Lagers & bussen Assen & naven Tandwielen, riemen & poelies Veren Ruiten & cabineramen Transpalety a zakladače zakladač Manipulační vozíky Vysokozdvižné vozíky Plynová vzpěra Zrcátka Ovládání Řetězy Židle a příslušenství Nákladní vozíky Rovné díly Příslušenství

352 products found

Tapered Bearing 32213

The tapered bearing 32213 (ref. 32213) is a tapered roller bearing (conical bearing) for the chassis and drive of forklifts and material handling.A tapered bearing absorbs radial and axial loads at the same time and is used in wheel hubs and axles. Thanks to its conical shape, it carries high, combined loads. Replace this bearing in case of play, noise or stiffness.Tapered roller bearing / conical bearingAbsorbs radial and axial loadsAlso known under reference: 32213For forklifts / material handling

69,79 €*incl. VAT

57,68 €excl. VAT

Více informací

Tapered Bearing 33110

The tapered bearing 33110 (ref. 33110) is a tapered roller bearing (conical bearing) for the chassis and drive of forklifts and material handling.A tapered bearing absorbs radial and axial loads at the same time and is used in wheel hubs and axles. Thanks to its conical shape, it carries high, combined loads. Replace this bearing in case of play, noise or stiffness.Tapered roller bearing / conical bearingAbsorbs radial and axial loadsAlso known under reference: 33110For forklifts / material handling

41,25 €*incl. VAT

34,09 €excl. VAT

Více informací

Tapered Bearing 33211

The tapered bearing 33211 (ref. 33211) is a tapered roller bearing (conical bearing) for the chassis and drive of forklifts and material handling.A tapered bearing absorbs radial and axial loads at the same time and is used in wheel hubs and axles. Thanks to its conical shape, it carries high, combined loads. Replace this bearing in case of play, noise or stiffness.Tapered roller bearing / conical bearingAbsorbs radial and axial loadsAlso known under reference: 33211For forklifts / material handling

52,02 €*incl. VAT

42,99 €excl. VAT

Více informací

Tapered Bearing Complete

The tapered bearing is a component for forklifts and material handling.The tapered (taper roller) bearing absorbs both radial and axial forces and supports rotating shafts and hubs. As a complete bearing, replace it in the event of play or wear.Component for shafts and hubsFor forklifts / material handlingOriginal part, or suitable as a replacement for the original part.

369,90 €*incl. VAT

305,70 €excl. VAT

Více informací

Tapered Bearing Complete

The Tapered Bearing Complete (art. VDT5866772) is a tapered bearing (complete) for forklifts and material handling.The bearing allows a shaft or hub to rotate smoothly and with little friction while absorbing the load. In case of play, noise or stiffness, replace the bearing to make the drive or suspension run smoothly again.Supports and guides rotating partsFor forklifts and material handlingSuitable as a replacement for the original part.

13,93 €*incl. VAT

11,51 €excl. VAT

Více informací

Tapered Bearing Complete

The Tapered Bearing Complete (art. TE50129) is a tapered bearing (complete) for forklifts and material handling.The bearing allows a shaft or hub to rotate smoothly and with low friction and absorbs the load. In case of play, noise or stiffness, replace the bearing to make the drive or suspension run smoothly again.Carries and guides rotating partsFor forklift and material handlingSuitable as a replacement for the original part.

47,67 €*incl. VAT

39,40 €excl. VAT

Více informací

Tapered Bearing Complete

The Tapered Bearing Complete (art. VDT6172216) is a tapered bearing (complete) for forklifts and material handling.The bearing allows a shaft or hub to rotate smoothly and with little friction while absorbing the load. In case of play, noise or stiffness, replace the bearing to make the drive or suspension run smoothly again.Supports and guides rotating partsFor forklifts and material handlingSuitable as a replacement for the original part.

40,38 €*incl. VAT

33,37 €excl. VAT

Více informací

Tapered Bearing Complete

This Tapered Bearing Complete is a part for forklifts and material handling.This bearing or bush reduces friction and guides a rotating or moving shaft. In the event of wear or play, replace the bearing for smooth operation.Smooth guidance, less frictionFor forklifts and material handlingSuitable as a replacement for the original part

61,83 €*incl. VAT

51,10 €excl. VAT

Více informací

Thrust Bearing

Thrust Bearing

21,26 €*incl. VAT

17,57 €excl. VAT

Více informací

Thrust bearing 2255106

The thrust bearing 2255106 (ref. 2255106) is an axial bearing for absorbing thrust forces.A thrust bearing absorbs axial (acting in the direction of the shaft) load while parts rotate relative to each other. Indispensable where a rotating shaft is under axial pressure, with low friction and a long service life.Axial thrust bearingFor forklifts and material handlingAlso known under reference: 2255106

779,62 €*incl. VAT

644,31 €excl. VAT

Více informací

Tolerance Bush

The tolerance bush is a bearing and bush part for the chassis of forklifts and material handling equipment.A tolerance bush bridges the play between a shaft and its opening and provides a play-free, clamping fit. In the event of wear, replacement restores a tight, reliable connection.Tolerance bush for the chassisFor forklifts / material handlingSuitable as a replacement for the original part.

37,57 €*incl. VAT

31,05 €excl. VAT

Více informací

Washer

Washer

14,47 €*incl. VAT

11,96 €excl. VAT

Více informací

Washer

Washer

49,92 €*incl. VAT

41,26 €excl. VAT

Více informací

Washer 20x25x16

Washer

23,26 €*incl. VAT

19,22 €excl. VAT

Více informací

Washer 35x40x20

Washer

37,92 €*incl. VAT

31,34 €excl. VAT

Více informací

Washer 45x50x20

Washer

61,55 €*incl. VAT

50,87 €excl. VAT

Více informací