Nabíjecí kabely & adaptéry

The SPI1224 battery charger has a maximum charging current of 15 amperes at 12V and 10 amperes at 24V. The charger runs on 230V AC and charges 12-24V DC batteries. Thanks to the hook, the charger is easy to store while charging, so the cables don't get in the way. In addition, this trickle charger has a rubber housing to protect it even better against impact and drop damage.Specifications:• Voltage: 12-24V DC• Min. battery voltage: 0,5V• Max. charging current: 15A - 10A• Suitable for: AGM, GEL, CALCIUM, Start 'n Stop• Rubber housing• Microprocessor• Protection against reverse polarity• Thermal protection• Automatic shut-off• Hook• IP20

The SPI15 battery charger has a maximum charging current of 15 amperes. The charger runs on 230V AC and charges 12V DC batteries. Thanks to the hook, the charger is easy to store while charging, so the cables don't get in the way. In addition, this trickle charger has a rubber housing to protect it even better against impact and drop damage. The charger is equipped with a showroom mode that provides a constant power supply. Specifications: • Voltage: 12V DC • Min. battery voltage: 0,5V • Max. charging current: 15A • Showroom mode • Suitable for: AGM, GEL, CALCIUM, Start 'n Stop • Rubber housing • Microprocessor • Protection against reverse polarity • Thermal protection • Automatic shut-off • Hook • IP20

The SPI2 battery charger has a maximum charging current of 2 amperes. The charger runs on 230V AC and charges 6V and 12V DC batteries. Thanks to the hook, the charger is easy to store while charging, so the cables don't get in the way. In addition, this trickle charger has a rubber housing to protect it even better against impact and drop damage. Specifications: • Voltage: 6V DC - 12V DC • Min. battery voltage: 0,5V • Max. charging current: 2A • Suitable for: AGM, GEL, CALCIUM, Start 'n Stop • Rubber housing • Microprocessor • Protection against reverse polarity • Thermal protection • Automatic shut-off • Hook • IP54

The SPI3 battery charger has a maximum charging current of 3 amperes. The charger runs on 230V AC and charges 12V DC batteries. Thanks to the hook, the charger is easy to store while charging, so the cables don't get in the way. In addition, this trickle charger has a rubber housing to protect it even better against impact and drop damage.Specifications:• Voltage: 12V DC• Max. charging current: 3A• Suitable for: AGM, GEL, CALCIUM, Start 'n Stop & Lithium LiFePO4• Rubber housing• Microprocessor• Protection against reverse polarity• Thermal protection• Automatic shut-off• Hook• IP54

The SPI6 battery charger has a maximum charging current of 6 amperes. The charger runs on 230V AC and charges 12V DC batteries. Thanks to the hook, the charger is easy to store while charging, so the cables don't get in the way. In addition, this trickle charger has a rubber housing to protect it better against impact and drop damage. Specifications: • Voltage: 12V DC • Min. battery voltage: 0,5V • Max. charging current: 6A• For batteries up to 130Ah• Suitable for: AGM, GEL, CALCIUM, Start 'n Stop • Rubber housing • Microprocessor • Protection against reverse polarity • Thermal protection • Automatic shut-off • Hook • IP20

This 3300mA portable USB charger with 90° angled BIKE connector can charge up to 2 mobile devices at the same time. This way you charge a combination of your mobile phone, GPS system, camera or tablet via your BMW, TRIUMPH or Victory motorcycle with a standard MOTORCYCLE(DIN) connection.Specifications:- Charge connector (input): 90° standard MOTORCYCLE plug of Ø12mm- Power (input): 12V vehicle system with 12V lead-acid battery or 12.8V lithium battery- Charge connector (output): 2x USB (1x USB-A & 1x USB-C)- Power (output): 3300mA- Style: Fully sealed electronic housing with a blue LED. Unique seal with cap for the USB connection. Any USB cable is sealed when plugged in.Operation: fully automatic:- Vehicle battery protection: USB output shuts off immediately 1 hour after the ignition is switched off or when the battery charge level drops below 12.4V.- Active when the vehicle battery voltage is more than 13.3V.- Short circuit, overheating, overvoltage protectionOperation (Voltage:- USB ON - 13.3V to 18V – unlimited USB output, USB LED on. Supplies power via USB when the vehicle engine charges the battery.- USB 1 HOUR - 12.4V to 13.3V – 1 hour USB output, USB LED on. Enters stand-by mode after 1 hour or at voltage < 12.4V.- STAND-BY MODE – Monitoring the voltage, becomes active again when the vehicle battery voltage is more than 13.3V again.- SWITCHED OFF = 9V

This 3300mA weatherproof USB charger can charge up to 2 mobile devices at the same time. This lets you charge a combination of your mobile phone, GPS system, camera or tablet via your BMW, TRIUMPH or Ducati MS motorcycle with a standard MOTOR(DIN) connection.Specifications:- Charge connector (input): 180° standard MOTOR plug of Ø12mm- Power (input): 12V system of the vehicle with 12V lead-acid battery or 12.8V lithium battery- Charge connector (output): 2x USB (1x USB-A & 1x USB-C)- Power (output): 3300mA- Style: Fully sealed electronic housing with a blue LED. Unique seal with cap for the USB connection. Any USB cable is sealed when plugged in.Operation: fully automatic:- Protection of the vehicle battery: USB output shuts off immediately 1 hour after the ignition is switched off or when the charge level in the battery drops below 12.4V.- Active when the voltage of the vehicle battery exceeds 13.3V.- Short-circuit, overheating, overvoltage protectionOperation (Voltage:- USB ON - 13.3V to 18V – unlimited USB output, USB LED on. Delivers power via USB when the vehicle engine charges the battery.- USB 1 HOUR - 12.4V to 13.3V – 1 hour USB output, USB LED on. Goes into standby mode after 1 hour or at voltage < 12.4V.- STANDBY MODE – Monitoring the voltage, becomes active again when the voltage of the vehicle battery again exceeds 13.3V.- SWITCHED OFF = 9V

Y-splitter - DC2.5 connector to 2x DC2.5 socketsLength=12 inch/30 cm2 DC inputs of 2.5 mm1 DC plug of 2.5×5.5 mmMaximum cable current: 10 AmpSuitable for use at very low temperatures down to -40 °C/-40 °F, cable stays flexible at temperatures down to “below freezing”.

Y-splitter - SAE to 2 DCLength=12 inch/30 cm2 direct-current inputs of 2,5 mm2-pin SAE connector conforming to the industry standardMaximum cable current: 10 AmpSuitable for use at very low temperatures down to -40 °C/-40 °F, cable remains flexible at temperatures down to “below freezing”.

Y-splitter - SAE to 2x AUTO2 auto inputs with 21 mm Ø and internal locking slots and sealing cap for 2 USB chargers or GPS adapters with car plug.•Length=12 inch/30 cm•2-pin SAE connector conforming to the industry standard•Maximum cable current: 10 Amp•Suitable for use at very low temperatures down to -40 °C/-40 °F, cable remains flexible at temperatures down to “below freezing”.Includes built-in rubber seal for heavy-duty OptiMATE SAE connector. High-quality cable designed by TecMate. 3-year limited warranty.

Y-splitter - SAE to 2x fused SAEDistribute the power from your permanent battery cable, create 2 SAE outputs.•Length=12 inch/ 30 cm•SAE 2-pin connector to industry standard•Maximum cable current: 5 Amp•Suitable for use at low temperatures down to -20 °C/-4 °F•Includes built-in rubber seal and sealing cap for OptiMATE heavy-duty SAE connector.High-quality cable designed by TecMate. 3-year limited warranty.