Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Overige houders

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

99 products found

RAM® ATV/Side By Side double ball rail mount with gun holster clip

RAM® ATV/Side By Side double ball rail mount with gun holster clip

The RAM-B-149Z-2-GUN1U consists of a steel strap base, U-bolt bases, double socket arm and gun holster clip. The mount incorporates a 1" diameter patented rubber ball-and-socket system, with adjustment points at both ends of the double socket arm. A twist of the arm knob moves the gun holster clip to your optimal viewing position. Designed for a tight installation, the RAM strap mount is suitable for most common roll cage sizes on Side By Sides, allowing the RAM rubber ball base to be positioned. This mount can also be attached to smaller diameter handlebars on ATVs with the included hardware.

122,94 €*incl. VAT

101,60 €excl. VAT

Více informací

RAM® ATV/Side By Side rail mount with LED spotlight

RAM® ATV/Side By Side rail mount with LED spotlight

The new RAM Mounts LED spotlight has been completely redesigned. We have integrated a new LED lamp that gives a brighter and more efficient light, increasing the safety of your ATV, boat or vehicle while reducing power consumption. The weather-resistant housing protects the LED lamp, which has a 30-degree beam angle for a wider and brighter light range, from the elements. The long cord with a standard 12V plug means you can mount the lamp from virtually any location. The RAM-B-152-231Z-2 consists of a double socket arm, one strap hose clamp and U-bolt base, and the rubber-coated RAM LED spotlight. Designed for a clean installation, this mount is suitable for the most common tube sizes on Side By Sides and ATVs. Because the strap clamp is tucked away securely in a compact housing, you don't have to worry about exposed sharp edges or unwanted loosening. The patented rubber ball-and-socket technology dampens shocks and vibrations and also provides virtually infinite adjustability to position your lamp in the ideal spot.

276,16 €*incl. VAT

228,23 €excl. VAT

Více informací

RAM® brake/clutch reservoir mount with LED spotlight

RAM® brake/clutch reservoir mount with LED spotlight

The RAM-B-174-152U consists of a rubber-coated LED spotlight with 1" diameter ball with brake/clutch reservoir and handlebar/rail mounting. The base consists of a 1" diameter rubber ball and hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25". The brake/clutch reservoir hardware includes both standard and metric mounting bolts. Multiple pivot points and the rubber ball and socket technology allow for near-infinite adjustability and perfect positioning angles.

262,00 €*incl. VAT

216,53 €excl. VAT

Více informací

RAM® composite 1" high-strength rail mount for HP iPAQ

RAM® composite 1" high-strength rail mount for HP iPAQ

The RAM® composite 1" high-strength rail mount for HP iPAQ (art. RAP-B-149-CO1U) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The rail mount attaches with a strap or clamp around a rail or tube and connects to a holder via the RAM® ball-and-socket system. This lets you quickly mount a device on bars and railings without drilling.Attachment around rail or tubePart of the RAM® ball-and-socket systemOriginal RAM Mounts part.

58,56 €*incl. VAT

48,40 €excl. VAT

Více informací

RAM® composite 1" rail mount with universal belt clip holder

RAM® composite 1" rail mount with universal belt clip holder

The RAM® composite 1" rail mount with universal belt clip holder (art. RAP-B-149-BC1U) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The rail mount attaches with a strap or clamp around a rail or tube and connects to a holder via the RAM® ball-and-socket system. This lets you quickly mount a device on bars and railings without drilling.Attachment around rail or tubePart of the RAM® ball-and-socket systemOriginal RAM Mounts part.

57,44 €*incl. VAT

47,47 €excl. VAT

Více informací

RAM® composite drill-down mount with universal belt clip holder

RAM® composite drill-down mount with universal belt clip holder

The RAM® composite drill-down mount with universal belt clip holder (art. RAP-B-138-BC1U) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The drill-down mount is screwed firmly onto a surface and provides a solid, permanent base for a device via the RAM® ball-and-socket system. Suitable where a permanent, vibration-free installation is required.Fixed screw mounting on surfacePart of the RAM® ball-and-socket systemOriginal RAM Mounts part.

57,04 €*incl. VAT

47,14 €excl. VAT

Více informací

RAM® composite yoke clamp mount for Trimble TDS Ranger

RAM® composite yoke clamp mount for Trimble TDS Ranger

The RAM® composite yoke clamp mount for Trimble TDS Ranger (art. RAP-B-121-TD2U) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The yoke clamp mount clamps around a handlebar, tube or yoke and provides a sturdy base for a device via the RAM® ball-and-socket system. Ideal on a motorcycle, quad or boat where you want to mount on a tube.Clamp attachment around handlebar or tubePart of the RAM® ball-and-socket systemOriginal RAM Mounts part.

100,96 €*incl. VAT

83,44 €excl. VAT

Více informací

RAM® composite yoke clamp mount for Trimble TDS Recon

RAM® composite yoke clamp mount for Trimble TDS Recon

RAM composite clamp mount for the TDS Recon. The rubber ball-and-socket technology allows for virtually infinite adjustment and perfect viewing angles. High-quality composite materials keep your TDS Recon safe and within reach. The clamp base fits a rail or edge lip from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball, giving you the ultimate double ball base. Extra ball not included with the purchase of this mount.

94,37 €*incl. VAT

77,99 €excl. VAT

Více informací

RAM® composite yoke clamp mount with universal belt clip holder

RAM® composite yoke clamp mount with universal belt clip holder

The RAM® composite yoke clamp mount with universal belt clip holder (art. RAP-B-121-BC1U) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The yoke clamp mount clamps around a handlebar, tube or yoke and provides a solid base for a device via the RAM® ball-and-socket system. Ideal on a motorcycle, quad or boat where you want to mount on a tube.Clamp attachment around handlebar or tubePart of the RAM® ball-and-socket systemOriginal RAM Mounts part.

85,16 €*incl. VAT

70,38 €excl. VAT

Více informací

RAM® cup holder with 1/4"-20 male thread adapter

RAM® cup holder with 1/4"-20 male thread adapter

Designed for use with your SUP, this version of the RAM® drink cup holder attaches to the standard ¼"-20 stud mount often found on stand-up paddleboards. Suitable for various cup sizes, a slot on the side even accommodates your favourite cup or mug with a handle. A drain plug on the bottom of the holder helps prevent residue build-up, while hook slots on the side of the holder are perfectly positioned to hold various accessories.

30,73 €*incl. VAT

25,40 €excl. VAT

Více informací

RAM® cup holder with Leash Plug adapter

RAM® cup holder with Leash Plug adapter

Designed for use with your SUP, this version of the RAM® drink cup holder attaches to the leash plug of your stand-up paddleboard. Suitable for various cup sizes, a slot on the side even accommodates your favourite cup or mug with a handle. A drain plug on the bottom of the holder helps prevent residue build-up, while hook slots on the side of the holder are perfectly placed to hold various accessories.

47,06 €*incl. VAT

38,89 €excl. VAT

Více informací

RAM® double ball holder with ball for Datamax/Oneil printer

RAM® double ball holder with ball for Datamax/Oneil printer

The RAM-202-B-368U consists of a short medium double socket arm, a round base with a 2.5" diameter with the universal AMPS hole pattern and a ball for the Datamax/Oneil printer.

105,79 €*incl. VAT

87,43 €excl. VAT

Více informací

RAM® double ball screw-down mount with universal spring-loaded holder

RAM® double ball screw-down mount with universal spring-loaded holder

The RAM-B-138-PD2U consists of a medium length B size arm with a 2.5" diameter round plate featuring the universal AMPS hole pattern and our universal spring-loaded holder for PDA devices.

107,75 €*incl. VAT

89,05 €excl. VAT

Více informací

RAM® double ball yoke clamp mount for Trimble TDS Recon

RAM® double ball yoke clamp mount for Trimble TDS Recon

The RAM-B-121-TD1U consists of a yoke clamp base, double socket arm and cradle for the Trimble TDS Recon. The RAM yoke clamp mount fits rails from 0.625" up to 1.25". The mount incorporates a patented rubber ball-and-socket system with a 1" diameter ball, with adjustment points at the base and the cradle. With a twist of the arm knob you move the yoke clamp mount to your optimal viewing position.

114,38 €*incl. VAT

94,53 €excl. VAT

Více informací

RAM® drill-down double ball mount for Trimble Nomad

RAM® drill-down double ball mount for Trimble Nomad

The RAM-B-101U-TD3 consists of a medium length B size arm with a 2.5" diameter round plate with universal AMPS hole pattern and a custom-fit cradle for the Trimble Nomad.

83,10 €*incl. VAT

68,68 €excl. VAT

Více informací

RAM® drill-down holder for Trimble 41005-10

RAM® drill-down holder for Trimble 41005-10

The RAM-B-153 consists of a B-size medium-length arm, our 2.5" diameter round plate with universal AMPS hole pattern and mounting plate for Trimble 41005-10.

99,22 €*incl. VAT

82,00 €excl. VAT

Více informací

RAM® drill-down mount with LED spotlight

RAM® drill-down mount with LED spotlight

The new RAM Mounts LED spotlight has been completely redesigned. We have integrated a new LED lamp that gives a brighter and more efficient light, increasing the safety of your ATV, boat or vehicle while reducing power consumption. The weather-resistant housing protects the LED lamp, which has a 30-degree beam angle for a wider and brighter light range, from the elements. The long cord with a standard 12V plug means you can mount the lamp from virtually any location. The RAM-B-152 consists of a double socket arm, one 2.5" diameter round base with the universal AMPS hole pattern and the rubber-coated RAM LED spotlight. The patented rubber ball-and-socket technology dampens shocks and vibrations and also provides virtually infinite adjustability to position your lamp in the ideal spot.

248,22 €*incl. VAT

205,14 €excl. VAT

Více informací

RAM® Drill-Down mount with printer holder for Toshiba EP4 - short

RAM® Drill-Down mount with printer holder for Toshiba EP4 - short

The RAM-VPR-105T-B-1 consists of (2 pieces) 2.5" diameter round bases (AMPS hole pattern), a double socket arm of STANDARD length, dual steel brackets and stainless steel hardware, connected by a spring-loaded backbone of high-strength composite. The spring-loaded mechanism allows quick insertion and removal of the Toshiba EP4 printer. This is a custom-formed holder in which the side brackets leave access to all buttons, the display and the paper roll of the printer. The bottom of the spring-loaded backbone contains the universal AMPS hole pattern that fits all RAM mounts with the same hole pattern. The holder is designed with a RAM 1" diameter patented rubber ball-and-socket system with adjustment points at both ends of the double socket arm; this allows nearly infinite adjustment and perfect viewing angles.

479,68 €*incl. VAT

396,43 €excl. VAT

Více informací

RAM® drillable double ball mount for Trimble Nomad X

RAM® drillable double ball mount for Trimble Nomad X

The RAM® drillable double ball mount for Trimble Nomad X (art. RAM-B-101U-TD4) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The part is part of the modular RAM® ball-and-socket system and holds equipment vibration-proof and adjustable in place.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-101U-TD4Original RAM® Mounts part.

84,59 €*incl. VAT

69,91 €excl. VAT

Více informací

RAM® drillable double ball mount for Trimble Recon

RAM® drillable double ball mount for Trimble Recon

The RAM-B-101U-TD1 consists of a B size medium-length arm with a round 2.5" diameter plate with universal AMPS hole pattern and a custom-fit cradle for the Trimble Recon.

91,56 €*incl. VAT

75,67 €excl. VAT

Více informací

RAM® drink cup holder for rails

RAM® drink cup holder for rails

Designed for use with the rail mounting system on your boat, kayak or cooler, the RAM® drink cup holder for rails is the perfect holder for your drink when you're on the water. Suitable for various cup sizes, a slot on the side even accommodates your favourite cup or mug with a handle. A drainage hole at the bottom of the holder helps prevent residue build-up, while hook slots on the side of the holder are perfectly placed for lures. The drink cup holder is compatible with all versions of the RAM Tough-Track™ and has two attachment points – on the side for attachment to vertically mounted rails, and on the bottom for attachment to horizontally mounted rails.

31,86 €*incl. VAT

26,33 €excl. VAT

Více informací

RAM® Drop-N-Lock™ scanner gun holder with belt clip

RAM® Drop-N-Lock™ scanner gun holder with belt clip

The RAM® Drop-N-Lock™ scanner gun holder with belt clip is a carrying holder for barcode scanners from RAM Mounts.This holder lets a scanner gun with the Drop-N-Lock system easily drop in and lock, and is worn on the belt with a belt clip. Ideal for mobile scanning in material handling and logistics.Drop-N-Lock™ scanner gun holderWith belt clipFor material handling and logisticsOriginal RAM Mounts part.

58,62 €*incl. VAT

48,45 €excl. VAT

Více informací

RAM® Finger-Grip® universal holder with Glare Shield clamp mount

RAM® Finger-Grip® universal holder with Glare Shield clamp mount

The RAM-B-177-UN4 consists of a glare shield clamp base, double socket arm and universal Finger-Grip™ holder. Simply place the clamp on any clamping surface up to 5/8" thick and gently tighten the nylon thumb screws. The double ball-and-socket system provides perfect viewing angles to get the most out of your electronic device. The RAM glare shield clamp with double ball-and-socket system is by far the most discreet and tidy way to mount virtually any compact electronic device to the glare shield of your aircraft.

144,52 €*incl. VAT

119,44 €excl. VAT

Více informací

RAM® Finger-Grip™ composite universal holder with drill-down base

RAM® Finger-Grip™ composite universal holder with drill-down base

The RAM® Finger-Grip™ composite universal holder with drill-down base (art. RAP-B-138-UN4) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The Finger-Grip™ holder surrounds a GPS, radio or other device with adjustable 'fingers' and connects to the RAM® ball-and-socket system. This lets you securely attach various devices in a vehicle or vessel.Universal holder with adjustable gripsPart of the RAM® ball-and-socket systemOriginal RAM Mounts part.

99,89 €*incl. VAT

82,55 €excl. VAT

Více informací