Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Universele houders

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

471 products found

RAM-A-CAN™ II cup holder mount with RAM® Flex-Arm™ and Diamond plate

RAM-A-CAN™ II cup holder mount with RAM® Flex-Arm™ and Diamond plate

The RAP-299-2U consists of the RAM-A-CAN II™ cup holder base, 6" flex arm and diamond base adapter. The hole pattern on the diamond base adapter fits most RAM holders. A durable composite shell construction and soft fins that can be custom trimmed make this cup holder mount one of the most portable and versatile "Go Anywhere" products offered.

63,82 €*incl. VAT

52,74 €excl. VAT

Více informací

RAM-A-CAN™ II cup holder with RAM® Flex-Arm™ and round plate

RAM-A-CAN™ II cup holder with RAM® Flex-Arm™ and round plate

The RAP-299-202U consists of a universal cup holder base, 6" flex arm and 2.5" round base adapter with the universal AMPS hole pattern. A durable composite shell construction and soft fins that can be trimmed to size make the cup holder one of the most portable and versatile "Go Anywhere" products there is.

65,55 €*incl. VAT

54,17 €excl. VAT

Více informací

RAM-A-CAN™ II universal cup holder base with double ball mount

RAM-A-CAN™ II universal cup holder base with double ball mount

The RAP-299-3-B-102U consists of a double socket arm, two diamond bases and RAM-A-CAN™ II cup holder base. The diamond bases measure 2.43" x 1.31" and contain two holes at 1.912" centre-to-centre, at both ends of the diamond base. The hole pattern on the diamond bases fits many RAM holders, as well as third-party holders, including holders with the industry-standard AMPS hole pattern. The holder incorporates a patented rubber ball-and-socket system of 1" diameter with adjustment points at both socket ends of the arm. The RAM-A-CAN™ II cup holder base serves as the mounting point for the diamond base.

87,95 €*incl. VAT

72,69 €excl. VAT

Více informací

RAM-A-CAN™ II universal cup holder mount base with fitted double ball mount

RAM-A-CAN™ II universal cup holder mount base with fitted double ball mount

The RAP-299-3-B-102AU is a pre-assembled cup holder mounting system consisting of a double socket arm, two diamond bases and RAM-A-CAN™ II cup holder mount base. The diamond bases measure 2.43" x 1.31" and feature two holes at 1.912" centre-to-centre, at both ends of the diamond base. The hole pattern on the diamond bases fits many RAM holders, as well as third-party holders, including holders with the industry-standard AMPS hole pattern. Built into the holder is a patented 1" diameter rubber ball-and-socket system with adjustment points at both socket ends of the arm. The RAM-A-CAN™ II cup holder mount base serves as the mounting point for the diamond base.

90,82 €*incl. VAT

75,06 €excl. VAT

Více informací

RAM® 0-degree 18" flexible tube with double ball mount

RAM® 0-degree 18" flexible tube with double ball mount

The RAM® 0-degree 18" flexible tube with double ball mount (art. RAM-B-123-018-INT1) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The flexible arm lets you position the mounted device in virtually any position and holds that position, for optimal visibility and operation in the cab.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-123-018-INT1Original RAM® Mounts part.

173,99 €*incl. VAT

143,79 €excl. VAT

Více informací

RAM® 1/2" NPT thread adapter with two double ball mounts in C-size

RAM® 1/2" NPT thread adapter with two double ball mounts in C-size

This kit has two 6-inch double socket arms with attached 1.5 inch rubber ball mounting plates, and a double ball adapter with two 1.5 inch balls.

188,75 €*incl. VAT

155,99 €excl. VAT

Více informací

RAM® 12" flex arm with double ball mount

RAM® 12" flex arm with double ball mount

The RAM® 12" flex arm with double ball mount (art. RAM-B-141-CM1) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The flexible arm lets you position the mounted device in virtually any orientation and holds that position, for optimal view and operation in the cab.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-141-CM1Original RAM® Mounts part.

161,62 €*incl. VAT

133,57 €excl. VAT

Více informací

RAM® 12" flex arm with double ball mount & U-bolt base

RAM® 12" flex arm with double ball mount & U-bolt base

The RAM® 12" flex arm with double ball mount & U-bolt base (art. RAM-B-142-12) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.This clamp or U-bolt base clamps around a bar, handlebar or rail and provides a solid ball mounting point, without the need to drill.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-142-12Original RAM® Mounts part.

150,51 €*incl. VAT

124,39 €excl. VAT

Více informací

RAM® 18" flex arm with double ball mount and 1/4"-20 threaded stud

RAM® 18" flex arm with double ball mount and 1/4"-20 threaded stud

The RAM® 18" flex arm with double ball mount and 1/4"-20 threaded stud (art. RAM-B-141-1890) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The flexible arm lets you position the mounted device in virtually any orientation and holds that position, for optimal view and operation in the cab.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-141-1890Original RAM® Mounts part.

180,73 €*incl. VAT

149,36 €excl. VAT

Více informací

RAM® 2.5" square post clamp mount with round AMPS plate – medium arm

RAM® 2.5" square post clamp mount with round AMPS plate – medium arm

The RAM-101U-247-25 consists of a 6-inch double socket arm, a round base with a 2.5" diameter featuring the universal AMPS hole pattern and a 2.5" clamp base. The clamp base encloses a maximum width of 2.5" and is secured by screwing the two plates together with the supplied nuts and bolts. The rubber ball-and-socket technology dampens shocks and vibrations and also allows virtually infinite adjustment and perfect viewing angles.

106,65 €*incl. VAT

88,14 €excl. VAT

Více informací

RAM® 2.5" square post clamp mount with round AMPS plate – short arm

RAM® 2.5" square post clamp mount with round AMPS plate – short arm

The RAM-101U-B-247-25 consists of a short length double socket arm, a round base with a 2.5" diameter featuring the universal AMPS hole pattern and a square post clamp base with a maximum width of 2.5".

103,43 €*incl. VAT

85,48 €excl. VAT

Více informací

RAM® 2" square post clamp holder with 2 3/8" 2-hole pattern plate

RAM® 2" square post clamp holder with 2 3/8" 2-hole pattern plate

The RAM® 2" square post clamp holder with 2 3/8" 2-hole pattern plate (art. RAM-D-101U-HY1) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.The clamp grips around a tube, edge or bar and forms a repositionable mounting point in the RAM® system, quick to fit without tools or drilling.Clamp mounting without drillingFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-101U-HY1Original RAM® Mounts part.

329,51 €*incl. VAT

272,32 €excl. VAT

Více informací

RAM® 3" square post clamp mount with round AMPS plate – long arm

RAM® 3" square post clamp mount with round AMPS plate – long arm

The RAM-101U-D-247-3 consists of a long-length double socket arm, a round base with a 2.5" diameter featuring the universal AMPS hole pattern and a square post clamp base with a maximum width of 3".

183,68 €*incl. VAT

151,80 €excl. VAT

Více informací

RAM® 3" square post clamp mount with round AMPS plate – medium arm

RAM® 3" square post clamp mount with round AMPS plate – medium arm

The RAM-101U-247-3 consists of a 6-inch double socket arm, a round base with a 2.5" diameter featuring the universal AMPS hole pattern and a 3" clamp base. The clamp base encloses a maximum width of 3" and is secured by screwing the two plates together with the supplied nuts and bolts. The rubber ball-and-socket technology dampens shocks and vibrations and also allows virtually infinite adjustment and perfect viewing angles.

145,51 €*incl. VAT

120,26 €excl. VAT

Více informací

RAM® 4" square post clamp holder with round AMPS plate - D size

RAM® 4" square post clamp holder with round AMPS plate - D size

This ideal forklift holder consists of a D size short double socket arm, a round D size base of 2.5" diameter with the universal AMPS hole pattern and a 4" clamp base for mounting on square posts of forklifts. The clamp base encloses a maximum width of 4" and is secured by screwing the two plates together with the supplied nuts and bolts. The RAM® Mounts ball-and-socket technology dampens shocks and vibrations and also allows virtually infinite adjustment for perfect viewing angles. This D size forklift holder is designed for heavy duty monitor mounting on forklifts, as well as rugged tablets that can be combined with accessory brackets to support keyboards and other peripherals.

235,15 €*incl. VAT

194,34 €excl. VAT

Více informací

RAM® 4" square post clamp mount with round AMPS plate – C-size

RAM® 4" square post clamp mount with round AMPS plate – C-size

The RAM-101U-247-4 consists of a double socket arm, a round base with a 2.5" diameter featuring the universal AMPS hole pattern and a 4" clamp base. The clamp base encloses a square post with a maximum width of 4" and is secured by screwing the two plates together with the supplied nuts and bolts. The rubber ball-and-socket technology dampens shocks and vibrations and also allows virtually infinite adjustment and perfect viewing angles.

140,18 €*incl. VAT

115,85 €excl. VAT

Více informací

RAM® 6" Long 0° NPT Tube Mount with Double Ball Holder

RAM® 6" Long 0° NPT Tube Mount with Double Ball Holder

The RAM Mounts 6" tube mount 0° NPT with double ball is a mounting arm for attaching holders to tubes.The mount screws onto a tube with a 0° NPT connection and offers a 6" long arm with a double RAM ball to mount equipment securely and with infinitely variable adjustment. Ideal for attaching holders in vehicles, machinery and material handling.RAM 6" tube mount, 0° NPT, with double ballFor mounting RAM holders on tubesBrand: RAM Mounts

203,88 €*incl. VAT

168,50 €excl. VAT

Více informací

RAM® 6" Long 90° NPT Tube Mount with Double Ball Holder

RAM® 6" Long 90° NPT Tube Mount with Double Ball Holder

This mount connects directly to the floor or any other mounting surface via the base with a diameter of 2.5" that sits at 90, 45 or 0 degrees relative to the 6" long vertical post. At the top of the post is a 1.5" ball that is attached to the socket of a standard 4 5/8" double socket arm with a 1.5" ball. On top is a marine mounting plate of 6.25" x 2". Mounting hardware for the base is not included. The base screws off the post, allowing the mount to be moved to other locations.

198,22 €*incl. VAT

163,82 €excl. VAT

Více informací

RAM® 90-degree 18" flexible tube with double ball mount

RAM® 90-degree 18" flexible tube with double ball mount

The RAM® 90-degree 18" flexible tube with double ball mount (art. RAM-B-123-9018-INT1) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The flexible arm lets you position the mounted device in virtually any position and holds that position, for optimal visibility and operation in the cab.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-123-9018-INT1Original RAM® Mounts part.

173,72 €*incl. VAT

143,57 €excl. VAT

Více informací

RAM® 9mm angled bolt head adapter mount with round plate – long

RAM® 9mm angled bolt head adapter mount with round plate – long

The RAM-B-180-C-202U consists of a 1" diameter ball base with 9mm hole, long double socket arm and round base with the universal AMPS hole pattern. This mount is commonly used on motorcycles, attached to the mirror frame, typically found on BMW motorcycles. The mount is equipped with the patented RAM system featuring a 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for virtually infinite adjustability and perfect viewing angles.

79,51 €*incl. VAT

65,71 €excl. VAT

Více informací

RAM® adhesive Flex dashboard holder

RAM® adhesive Flex dashboard holder

The RAM peel-and-stick holder features a composite, adhesive Flex base. Peel off the adhesive backing and stick the holder wherever it works best for you. The RAM peel-and-stick holder is by far the most discreet and sleek way to mount virtually any compact electronic device on the dashboard of your vehicle. Once the snap-link ball is placed in the socket, the screw on the socket can be tightened, creating friction between the socket and the ball. This lets you easily move the holder and your device while still retaining the position you set.

34,00 €*incl. VAT

28,10 €excl. VAT

Více informací

RAM® adhesive Flex double ball holder with diamond plate - B-size short

RAM® adhesive Flex double ball holder with diamond plate - B-size short

The RAP-B-378-A-238U consists of the adhesive Flex base with 1" ball, SHORT double socket arm and diamond base adapter. The holder is designed with a patented rubber ball-and-socket system of 1" diameter with adjustment points at both ends of the double socket arm; this allows virtually infinite adjustment and perfect viewing angles. The hole pattern on the diamond base adapter connects to most RAM holders. The supplied patented RAM design dampens shocks and vibrations, which helps extend the lifespan of your device. Using a PSA adhesive strip, you can place the adhesive Flex holder virtually anywhere you want to keep your portable electronics clearly visible and always within reach. Thanks to its very small footprint, it easily finds a spot on your scooter, motorcycle, kayak, boat or dashboard. By attaching the patented 1" rubber ball to one of the many RAM arms, you create the ultimate socket system with multiple adjustment points for movement and perfect viewing angles.

47,67 €*incl. VAT

39,40 €excl. VAT

Více informací

RAM® anchor line lock with bulkhead/flat-surface base

RAM® anchor line lock with bulkhead/flat-surface base

The RAM® anchor line lock with bulkhead/flat-surface base is a line lock from RAM Mounts.This anchor line lock is attached to a bulkhead or flat surface and clamps an anchor line securely, so you can easily manage the line. Ideal for use on watercraft and in marine applications.Anchor line lockWith bulkhead/flat-surface baseFor watercraft and marine useOriginal RAM Mounts part.

76,17 €*incl. VAT

62,95 €excl. VAT

Více informací

RAM® ATV/Side By Side double ball rail holder

RAM® ATV/Side By Side double ball rail holder

The RAM-B-149Z-2U consists of a steel strap base, U-bolt bases, double socket arm and diamond adapter base. The diamond adapter base has a hole pattern that matches the industry-standard AMPS hole pattern and connects to a large number of RAM Mount and third-party holders. Designed for a tight installation, the RAM strap holder fits most common roll bar sizes on Side By Sides, allowing the RAM rubber ball base to be positioned. This holder can also be attached to smaller-diameter handlebars on ATVs using the supplied hardware. With the ball base in place, you have the foundation to mount anything from GPS devices, RAM Aqua Boxes and spotlights to radios.

80,51 €*incl. VAT

66,54 €excl. VAT

Více informací