Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Camerahouders

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

122 products found

RAM® adhesive double ball mount with 1/4"-20 threaded stud

RAM® adhesive double ball mount with 1/4"-20 threaded stud

The RAM-B-101-A-237PU consists of a short double socket arm, a round 2.5" diameter base, a round 2.5" PDA adhesive base and a 1" diameter rubber ball, connected with a 1/4"-20 camera thread. The male thread fits most standard female threads of cameras and camcorders on the underside of the camera. The round base includes pre-drilled holes, including the universal AMPS hole pattern. The mount incorporates a patented 1" diameter rubber ball-and-socket system with adjustment points at both ends of the socket arm; with a twist of the arm knob this provides infinite articulation and optimal viewing angles.

66,04 €*incl. VAT

54,58 €excl. VAT

Více informací

RAM® adhesive Flex double ball holder with action camera adapter

RAM® adhesive Flex double ball holder with action camera adapter

The RAP-B-378-202U-GOP1 consists of a 2.5" adhesive Flex base, double socket arm and custom GoPro® Hero adapter. Using the supplied PSA adhesive strip, you can place the adhesive Flex holder virtually anywhere you want to keep your handheld device clearly visible and always within reach. Thanks to its very small footprint, it easily finds a spot on your scooter, motorcycle, kayak, boat or dashboard. The holder is designed with a patented RAM rubber ball-and-socket system of 1" diameter with adjustment points at both ends of the double socket arm; this allows virtually infinite adjustment and perfect viewing angles. The GoPro® Hero adapter attaches directly to the bottom of the camera and replaces the factory mounting bracket.

58,82 €*incl. VAT

48,61 €excl. VAT

Více informací

RAM® ATV/Side By Side double ball rail mount with 1/4"-20 threaded stud

RAM® ATV/Side By Side double ball rail mount with 1/4"-20 threaded stud

The RAM-B-149Z-2-237 consists of a medium length B size double socket arm with a 1/4"-20 threaded stud and an ATV/Side By Side clamp base.

89,32 €*incl. VAT

73,82 €excl. VAT

Více informací

RAM® ATV/Side By Side handlebar U-bolt holder with action camera adapter

RAM® ATV/Side By Side handlebar U-bolt holder with action camera adapter

The RAM-B-149Z-2-GOP1U consists of a steel strap base, U-bolt bases, double socket arm and a 1" diameter ball with a custom-made GoPro® Hero adapter. The holder features the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles. Designed for a tight installation, the RAM strap holder fits most common roll bar sizes, allowing the RAM rubber ball base to be positioned. This holder can also be attached to smaller-diameter handlebars on ATVs using the supplied hardware. The GoPro® Hero adapter attaches directly to the bottom of the camera and replaces the original mounting bracket.

83,72 €*incl. VAT

69,19 €excl. VAT

Více informací

RAM® ATV/Side By Side rail holder with 1/4"-20 camera adapter - medium

RAM® ATV/Side By Side rail holder with 1/4"-20 camera adapter - medium

The holder is designed with a patented RAM ball-and-socket system with 1" diameter rubber ball, with adjustment points at both ends of the double socket arm; this provides virtually infinite adjustment and perfect viewing angles.

85,22 €*incl. VAT

70,43 €excl. VAT

Více informací

RAM® ATV/Side By Side rail holder with round plate & 1/4"-20 threaded stud

RAM® ATV/Side By Side rail holder with round plate & 1/4"-20 threaded stud

The RAM-B-149Z-2-202AU consists of a steel strap base, U-bolt bases, double socket arm and a round 2.5" diameter base with a 1/4"-20 threaded post. Designed for a tight installation, the supplied roll bar base fits most common tube sizes on Side By Sides and ATVs, allowing the RAM rubber ball base to be positioned. Because a strap clamp is neatly tucked away in a compact housing, you don't have to worry about exposed sharp edges or unwanted loosening. The camera base features a 1" rubber ball connected to a round 2.5" diameter base. Also included is a centred 1/4"-20 steel threaded stud; the round base provides support and stability for cameras resting on it. The 1/4"-20 steel male thread fits any standard female thread of camcorders and digital cameras.

90,80 €*incl. VAT

75,04 €excl. VAT

Více informací

RAM® ATV/Side By Side rail holder with Tough-Ball™ 1/4"-20 camera adapter

RAM® ATV/Side By Side rail holder with Tough-Ball™ 1/4"-20 camera adapter

The RAM® ATV/Side By Side rail holder with Tough-Ball™ 1/4"-20 camera adapter (art. RAM-B-231-2-252025) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.This clamp or U-bolt base clamps around a bar, handlebar or rail and provides a sturdy ball mounting point, without the need to drill.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-231-2-252025Original RAM® Mounts part.

90,92 €*incl. VAT

75,14 €excl. VAT

Více informací

RAM® ATV/Side By Side rail mount with 1/4"-20 camera adapter - short arm

RAM® ATV/Side By Side rail mount with 1/4"-20 camera adapter - short arm

The mount is designed with a patented RAM ball-and-socket system with 1" diameter rubber ball, with adjustment points at both ends of the double socket arm; this ensures virtually infinite adjustment and perfect viewing angles.

80,57 €*incl. VAT

66,59 €excl. VAT

Více informací

RAM® ATV/Side By Side rail mount with 1/4"-20 thread camera adapter

RAM® ATV/Side By Side rail mount with 1/4"-20 thread camera adapter

The RAM® ATV/Side By Side rail mount with 1/4"-20 thread camera adapter (art. RAP-B-231-2-A-379-252025U) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The rail mount attaches with a strap or clamp around a rail or tube and connects to a holder via the RAM® ball-and-socket system. This lets you mount a device quickly on bars and railings without drilling.Attachment around a rail or tubePart of the RAM® ball-and-socket systemOriginal RAM Mounts part.

71,49 €*incl. VAT

59,08 €excl. VAT

Více informací

RAM® ATV/UTV rail mount with Garmin VIRB™ camera adapter

RAM® ATV/UTV rail mount with Garmin VIRB™ camera adapter

The RAM-B-231Z-2-GA63U consists of a steel clamp band base, U-bolt bases, double socket arm and Garmin VIRB™ camera adapter. Designed for a clean installation, the RAM clamp band mount fits most common roll bar sizes on Side By Sides, allowing the RAM rubber ball base to be positioned. This mount can also be attached to smaller diameter handlebars on ATVs using the included hardware. The mount is designed with a patented RAM ball-and-socket system with 1" diameter rubber ball, with adjustment points at both ends of the double socket arm; this ensures virtually infinite adjustment and perfect viewing angles. The adapter attaches directly to the bottom of the camera and replaces the factory mounting bracket.

81,20 €*incl. VAT

67,11 €excl. VAT

Více informací

RAM® ball adapter for GoPro® bases with universal action camera adapter

RAM® ball adapter for GoPro® bases with universal action camera adapter

For anyone who needs more versatility from their GoPro® mounting solution, look no further than the RAM Adapter for GoPro Bases. Using the RAM ball and socket system, you easily attach the supplied B size 1" ball to the base for enhanced adaptability and superior vibration damping - so you get the most out of your GoPro. This kit includes a short arm and a universal action camera adapter with two prongs for even more versatility, allowing easy adjustable 360-degree rotation of your camera.

49,00 €*incl. VAT

40,50 €excl. VAT

Více informací

RAM® Bow-Cam™ holder with universal action camera adapter

RAM® Bow-Cam™ holder with universal action camera adapter

Easily attach your favourite action camera to your bow with the RAM® Bow-Cam™. The included RAM® Tough-Ball™ with male threaded post connects to your bow's stabiliser port, allowing the standard-length arm and universal action camera adapter to be adjusted to the perfect angle. RAM® double ball-and-socket mounts feature vibration dampening, so your GoPro® or compatible action camera gets a stable image from your bow. The RAM® Bow-Cam™ holder is also available with the RAM® X-Grip® phone holder. Compatible with any Hoyt, Matthews, Bear, PSE or Diamond bow.

60,19 €*incl. VAT

49,74 €excl. VAT

Více informací

RAM® brake/clutch reservoir mount with 1/4"-20 thread camera adapter

RAM® brake/clutch reservoir mount with 1/4"-20 thread camera adapter

The RAM-B-174-366U consists of our B-size medium-length arm, our motorcycle brake/clutch reservoir mount and a 1/4"-20 thread post.

83,13 €*incl. VAT

68,70 €excl. VAT

Více informací

RAM® brake/clutch reservoir mount with Garmin VIRB™ camera adapter

RAM® brake/clutch reservoir mount with Garmin VIRB™ camera adapter

The RAM-B-174-GA63U consists of hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25", double socket arm and Garmin VIRB™ camera adapter. The brake/clutch reservoir hardware includes both standard and metric mounting bolts. To check whether the base fits your motorcycle, compare the hole spacing of the base with your clutch/brake reservoir. The centre-to-centre spacing of the holes has a minimum width of 0.94" and a maximum of 1.58". The holder is equipped with the patented RAM system with 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for near-infinite adjustability and perfect viewing angles. The adapter attaches directly to the bottom of the camera, replacing the original mounting bracket.

62,31 €*incl. VAT

51,50 €excl. VAT

Více informací

RAM® brake/clutch reservoir mount with round plate & 1/4"-20 threaded stud

RAM® brake/clutch reservoir mount with round plate & 1/4"-20 threaded stud

The RAM-B-174-202AU consists of hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25", double socket arm and 2.5" diameter round base adapter with a 1/4"-20 male thread for cameras. The brake/clutch reservoir hardware includes both standard and metric mounting bolts. The supplied 1/4"-20 steel threaded stud, centred, with round base provides support and stability for cameras resting on it. The 1/4"-20 steel male threaded stud fits any standard female thread on camcorders and digital cameras. The holder is equipped with the patented RAM system with 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for near-infinite adjustability and perfect viewing angles.

88,89 €*incl. VAT

73,46 €excl. VAT

Více informací

RAM® brake/clutch reservoir mount with universal action camera adapter

RAM® brake/clutch reservoir mount with universal action camera adapter

The RAM-B-174-GOP1U consists of hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25", double socket arm and 1" diameter ball with a custom-made GoPro® Hero adapter. The brake/clutch reservoir hardware includes both standard and metric mounting bolts. The GoPro® Hero adapter attaches directly to the bottom of the camera, replacing the original mounting bracket. The holder is equipped with the patented RAM system with 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for near-infinite adjustability and perfect viewing angles.

83,47 €*incl. VAT

68,98 €excl. VAT

Více informací

RAM® camera mount for glareshield and window

RAM® camera mount for glareshield and window

The RAM-B-127 consists of a medium-length B size double socket arm with a round 2.5" diameter plate with the universal AMPS hole pattern and a removable 1/4"-20 threaded post on one side and a glareshield clamp base on the other. The glareshield clamp base is suitable for the edges of glareshields or other sturdy surfaces up to .625" thick.

95,87 €*incl. VAT

79,23 €excl. VAT

Více informací

RAM® composite double ball mount with 1/4"-20 male thread

RAM® composite double ball mount with 1/4"-20 male thread

The RAM® composite double ball mount with 1/4"-20 male thread (art. RAP-B-101AU) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The ball adapter adds a RAM® ball to a base or device so it can be integrated into the RAM® ball-and-socket system. This lets you connect a variety of components flexibly and vibration-free.Ball/plate adapter for the RAM® ball-and-socket systemFor flexible connection of base and holderOriginal RAM Mounts part.

43,46 €*incl. VAT

35,92 €excl. VAT

Více informací

RAM® composite drill-down mount with universal action camera adapter

RAM® composite drill-down mount with universal action camera adapter

The RAP-B-138-GOP1 consists of a 2.5" diameter round base with the universal AMPS hole pattern, STANDARD size double socket arm and 1" diameter ball with custom-made GoPro® Hero adapter. The holder is equipped with a patented RAM® 1" diameter rubber ball-and-socket system, with adjustment points at both ends of the double socket arm; this provides virtually infinite adjustability and perfect viewing angles. The RAM-B-138-GOP1 can be used as a drill-down or as a temporary, removable mounting solution with the addition of the RAP-339U accessory. The GoPro® Hero adapter attaches directly to the bottom of the camera and replaces the original mounting bracket.

44,89 €*incl. VAT

37,10 €excl. VAT

Více informací

RAM® double ball diamond mount with action camera adapter

RAM® double ball diamond mount with action camera adapter

The RAM-B-102-GOP1U consists of a B size medium-length arm with a diamond base with 2-hole AMPS hole pattern and an action camera adapter.

53,92 €*incl. VAT

44,56 €excl. VAT

Více informací

RAM® double ball holder with 3" square post clamp base and 1/4"-20 threaded stud

RAM® double ball holder with 3" square post clamp base and 1/4"-20 threaded stud

The RAM-202A-247-3U consists of a medium double socket arm, a 3" square post clamp base and a round plate with a 2.5" diameter with AMPS hole pattern and a 1/4"-20 threaded stud.

154,89 €*incl. VAT

128,01 €excl. VAT

Více informací

RAM® double ball holder with AMPS plate and 1/4"-20 action camera adapter

RAM® double ball holder with AMPS plate and 1/4"-20 action camera adapter

The RAM-B-347-366U consists of a 2 x 2.5" square base containing the universal AMPS hole pattern, a double socket arm and a 1" ball, connected to a round plate with 1/4"-20 camera thread. The steel threaded pin with 1/4"-20 male thread fits any standard female thread of camcorders, digital cameras and POV cameras. The holder features a patented RAM ball-and-socket system with a 1" diameter rubber ball and adjustment points at both ends of the double socket arm; this allows virtually infinite adjustment and perfect viewing angles.

54,78 €*incl. VAT

45,27 €excl. VAT

Více informací

RAM® double ball mount with 1/4"-20 male thread - B size long

RAM® double ball mount with 1/4"-20 male thread - B size long

The RAM-B-101U-C-A consists of a long B size arm with a round 2.5" diameter plate with universal AMPS hole pattern, as well as a round 2.5" diameter plate with universal AMPS hole pattern and a removable 1/4"-20 threaded post.

79,07 €*incl. VAT

65,35 €excl. VAT

Více informací

RAM® double ball mount with 1/4"-20 male thread - B-size medium

RAM® double ball mount with 1/4"-20 male thread - B-size medium

The RAM-B-101AU consists of a double socket arm, one round base of 2.5" diameter with the universal AMPS hole pattern and a universal camera/camcorder base. The universal camera/camcorder base consists of a rubber ball of 1" diameter connected to a round base of 2.5" diameter with 1/4-20 camera thread. The male thread fits the most standard female threads of cameras and camcorders on the underside of the camera. The rubber ball-and-socket technology dampens shocks and vibrations and provides virtually infinite adjustability and perfect viewing angles.

64,42 €*incl. VAT

53,24 €excl. VAT

Více informací