Flocculant Flocculant 10L
€101.82incl. VAT
€84.15excl. VAT
Available, delivery time: 1-3 Days
Characteristics
Brand
Sonax
Article numbers
SO551600
Product information "Flocculant Flocculant 10L"
Polymer solution for cleaning process water and waste water in wastewater treatment plants by means of flocculation. In doing so, foreign substances in the water are bound. Quickly forms a large floc. Effective, even at low temperatures. polyaluminium hydroxide chloride. pH 1.
- Feed the pure product via the dosing pump into the process water stream in the chain shaft or into the first settling tank.
- When using, ensure that the product is well mixed with the water to be cleaned, the pH value must be between 6.5 and 9.
- The individual dosage depends on the water load with dirt, oil and surfactants.
- Do not pre-dilute.
- Recommended amount: 40-90 g per m³ of waste water.
NOTE: Protect from direct sunlight. Do not expose to temperatures above 50°C. Protect from frost.
- Feed the pure product via the dosing pump into the process water stream in the chain shaft or into the first settling tank.
- When using, ensure that the product is well mixed with the water to be cleaned, the pH value must be between 6.5 and 9.
- The individual dosage depends on the water load with dirt, oil and surfactants.
- Do not pre-dilute.
- Recommended amount: 40-90 g per m³ of waste water.
NOTE: Protect from direct sunlight. Do not expose to temperatures above 50°C. Protect from frost.
No reviews found. Share your insights with others.