Novatio FCP-110 FP Construct Anthracite 290ml
€18.00excl. VAT
Available, delivery time: 1-3 Days
Product information "Novatio FCP-110 FP Construct Anthracite 290ml"
1K MS HYBRID POLYMER ADHESIVE
Contains no isocyanates, is free of known toxic substances and is non-corrosive. Safe on all wet paints, powder and textured coatings. Fast and high strength build-up, good adhesion to aluminium alloys. The rigid joints reduce vibrations and contact noise.
Advantages
Corner bonding of window and door profiles.
Hand-firm after 3 hours.
Use
- Clean if necessary with Safety Clean and/or Multifoam.
Optional: apply MGM-170 as a booster for faster strength build-up and guaranteed curing. Lightly mist into the chambers of the press corners or moisten the press corners with MGM-170.
- Apply FCP-110 FP Construct into the chambers.
- Place the press corners and assemble the window.
- Remove excess product, press the corners and clean the mitres immediately using Safety Clean.
Technical specifications
- Base: 1K MS hybrid polymer.
- Curing: cross-linking by reaction with air humidity.
- Consistency: paste.
- Colour: light grey.
- Processing temperature: between +5°C and +35°C.
- Temperature resistance: from -40°C to +90°C.
- Skin formation: 2-5 minutes.
- Curing (in mitre): 24h (maximum strength build-up after 7 days)
- Tensile strength without MGM-170:
- After 3h: 0.3 N/mm².
- After 24h: 1.4 N/mm².
- After 7 days: 2.0 N/mm².
- Tensile strength with MGM-170:
- After 3h: 0.7 N/mm².
- After 24h: 1.8 N/mm².
- After 7 days: 2.0 N/mm².
- Elongation at break: >200%.
- Shelf life: 12 months, stored cool and dry in the original packaging.
- Safety measures: please consult the safety data sheet.