Novatio Fixapox - tin 1kg

2K TRANSPARENT EPOXY IMPREGNATION AND PRIMER

• Fixapox is a 2-component deep-penetrating impregnation agent for protection and treatment of concrete, stone, wood and metals. It hardens concrete floors, stone, cement screeds and makes them dust-free, more wear-resistant and easy to clean.
• Penetrates deep into rust and complexes, passivates and anchors this rust down to the healthy metal core and protects against corrosion, erosion and other chemical influences.
• Is an ideal, non-saponifiable adhesion primer for paints, mastics, joint sealants, adhesives and other finishes.

Advantages

For preventive and curative use.

Strengthens weak substrates before bonding.

Passivates rust.

Unique adhesion to metal, polyester, stainless steel, galvanised sheet, wood, stone and concrete.

Use

• Complete packaging:

Pour the hardener (Component B, plastic bottle) completely into the resin (Component A, tin).

Shake thoroughly until a homogeneous mixture is obtained.

• Partial packaging:

Use the supplied measuring cup for a mixing ratio of Component A : Component B 1:1.

Mix well until a homogeneous mixture is obtained.

• Apply to a clean, dry and stable substrate.
• If necessary, apply a second layer after 1 hour (on porous materials).
• Clean tools with Poxy DC.

After mixing, workable for 30 minutes at temperatures up to +20°C. Apply with a brush or spray gun.

At higher temperatures, this working time shortens considerably.

After application, protect against rain and moisture for 24 hours (at 20°C).

Consumption, depending on the porosity of the substrate: first layer: 300 ml/m² and second layer: 250 ml/m².

As a primer and substrate reinforcement, always apply 2 layers.

Overpaintable with most lacquers and paints after a maximum of 7 days; if longer, first roughen or chemically etch.

Walkable and dust-dry after +/- 12 hours at +20°C. Chemically loadable after 7 days at +20°C. Minimum processing temperature: +5°C.

Novatio epoxy and adhesives can be applied to Fixapox even wet-on-wet.

Technical specifications

Component A

• Form: liquid.
• Colour: transparent.
• Odour: characteristic.
• Flash point: > 150°C.
• Self-ignition: none.
• Explosion hazard: none.
• Density at 20 °C: 1,13 g/cm³.
• Solubility in/miscibility with water: Not soluble.
• Solubility in organic solvents: Soluble in many organic solvents.
• Dynamic viscosity at 25 °C: 500 - 900 mPas.
• Solvent content: 0%

Component B

• Form: liquid.
• Colour: transparent light yellow.
• Odour: characteristic.
• Boiling point/boiling range: 171°C.
• Flash point: 67°C.
• Ignition temperature: 240°C.
• Self-ignition: none.
• Explosion hazard: none.
• Density at 20 °C: 1,02 g/cm³.
• Solubility in/miscibility with water: miscible.
• Solubility in organic solvents: Soluble in many organic solvents.
• Dynamic viscosity at 25 °C: 40 - 60 mPas.
• Solvent content: organic solvent: < 50 %.
  

• Composition: epoxy resin, hardener and selected solvents.
• Colour: colourless - darkens treated surfaces.
• Solids content: approx. 75%.
• Specific weight: 1 +/- 0,1 kg/dm³.
• Adhesion: to wood, stone, concrete: exceeds the cohesion of the substrate; to metals: > 2 N/mm² depending on the pretreatment.
• Usage time after mixing: approx. 30 minutes at 15°C (pot life).
• Drying times at 15°C: After approx. 12 h: walkable: after approx. 24h: mechanically loadable; after 7 days: chemically resistant.
• Processing temperature: between +10°C and +25°C.
• Temperature resistance: from -30°C to 55°C permanent; 110°C accidental.
• Dimensional stability: unloaded up to 200°C.
• Chemical resistance: resists acids, alkalis, oils, fats, petrols, salts and many solvents, fertilisers, urines,...; resists aggressive gases, steam and sea air.
• Is resistant to aggressive gases, vapours and sea air; steam cleaning is possible after full curing.
• Shelf life: 12 months, dry, cool and frost-free.
• Safety measures: please consult the safety data sheet.