Novatio Megaplast MM - cartridge 2 x 25ml

STRUCTURAL BONDING AND REPAIRING

Megaplast MM is the 3rd generation of acrylates for structural bonding and plastic repairs. Megaplast MM consists of methyl methacrylates and has a fast curing, an extreme tensile strength and is very UV- and solvent-resistant.

Advantages

Literally melts plastics together.

UV-resistant, impact-resistant and strong.

Long open working time, but with a fast curing.

Chemically and thermally resistant.

Use

Surface preparation

• Clean with Safety Clean and/or Multifoam.
• Roughen the material well.
• Make dust-free.
• Degrease with Safety Clean and Multifoam.
• Blow dry.

Cartridge preparation

• Remove the sealing cap from the cartridge.
• Place the cartridge in the gun.
• Pump until both components come out of the cartridge evenly.
• Place the mixer tip on the cartridge and, if necessary, cut it to the desired outlet opening.
• First extrude 2 cm of product.
• Apply to a dry and clean surface.
• After an interruption of 5 minutes, use a new mixer tip.

Before storage

• Remove the mixer tip.
• Clean the coupling system.
• Replace the sealing cap.

Technical specifications

• Composition: methyl methacrylate.
• Colour after mixing: black.
• Odour: characteristic.
• Mixing ratio: 1/1.
• Working time: 5 minutes.
• Bonding time: 12 -15 minutes.
• Workable: after 30 minutes.
• Tensile strength: 60 N/mm².
• Shear strength: 24 N/mm².
• Impact strength: < 20 KJ/m².
• Constant temperature resistance: from -40°C to +120°C. - approved for paint-baking cycle, powder coating and matt coating (+200°C - 20 minutes).
• Chemical resistance: most solvents, petrol, diesel, oil, acids, antifreeze, cleaning products, aggressive vapours,...
• UV resistance: OK.
• Adhesion: stainless steel, steel, aluminium, paint, varnish, wood, plexiglass, polycarbonate, PVC, fibreglass. ABS, polyester, acrylate, vinyl esters, urethane,...
• Overpaintable: yes.
• Shelf life: 9 months, dry, cool and frost-free.
• Safety measures: please consult the safety data sheet.