Novatio Nanocare Protect - can 5L

WATER-REPELLENT, DURABLE PROTECTION OF POROUS MATERIALS AND FABRICS

• Nanocare Protect prevents dirt and moisture from penetrating porous materials and fabrics.
• It is a durable protection against frost that also slows discolouration from UV rays and inhibits moss and mould formation. 
• Nanocare Protect improves thermal insulation by 30% and extends the service life of fabrics.
• Ready to use, without solvents and non-flammable.

Advantages

Protects against oil, grease, dirt, pollution, etc.

For indoor and outdoor use.

Colourless, odourless and safe.

Vapour-permeable.

Use

• Apply to a stable, clean and dry substrate. Clean, rinse and dry the substrate, if necessary. 
• Apply Nanocare Protect from bottom to top in two successive layers, wet on wet. 
• Allow to dry.

Apply with a brush or using a low-pressure pump fitted with a flat spray. The temperature of the substrate must be at least +5°C. Do not apply in rain or frost. Provide ventilation of the work area and always wear a mask with filter type A during application. Dry in 24 hours, depending on substrate, temperature and applied quantity. Maximum protection after 7 days. Used equipment can be cleaned immediately with water. Remove Nanocare Protect on panes or windows immediately with a damp cloth.

With 1 litre of Nanocare Protect you can treat between 2 and 10 m² depending on the porosity of the substrate.

Technical specifications

• Form: liquid.
• Odour: weak, characteristic.
• Melting point/melting range: < 0°C.
• Boiling point/boiling range: > 100°C.
• Auto-ignition: none.
• Explosion hazard: none.
• Vapour pressure at 20°C: approx. 23 hPa.
• Density at 20°C: approx. 1.07 g/cm³.
• Solubility in/miscibility with water: complete.
• pH value at 20°C: ± 6 (and only apply to substrate with pH value between 6 and 13: so after cleaning and before treatment with Nanocare Protect, rinse well and dry).
• Shelf life: 36 months, dry, cool and frost-free.