Novatio Seal & Bond MS22 X light grey - cartridge 310ml
€15.65excl. VAT
Available, delivery time: 1-3 Days
Product information "Novatio Seal & Bond MS22 X light grey - cartridge 310ml"
HIGH-TECH SEALING
MS22 X was developed for use in all conditions: from -10°C to +40°C and where excellent adhesion and high flexibility are required. MS22 X is very resistant to weathering, UV rays and chemical corrosion. This makes it excellently suited for use in all environments, from construction to industry.
Advantages
Applicable from -10°C to +40°C.
Strong and elastic.
Overpaintable and mould-resistant.
Ecological and safe.
Use
- Bring the cartridge to room temperature before use.
- Apply to a clean substrate, free of snow and ice, cleaning with Safety Clean and/or Multifoam if necessary. FS version if required.
Test adhesion on plastics, powder coatings, exotic wood species and bituminous materials. On difficult synthetic materials, Seal & Bond Special Primer can improve adhesion.
First reinforce weak and/or porous substrates with Fixapox.
Alkyd resin-containing paints will cure more slowly.
Use Safety Clean for a perfect finish and for removing uncured Novatio polymers.
Use Novakleen for finishing on porous materials.
Technical specifications
- Base : hybrid MS polymer.
- Curing: polymerisation by air humidity.
- Odour: neutral.
- Shore-A hardness (DIN 53505): 22.
- E-modulus 100% elongation (DIN 53504 S2): +/- 0.66 N/mm².
- Tensile strength (DIN 53504 S2): +/- 1.4 N/mm².
- Elongation at break (DIN 53504 S2): +/- 600%.
- Movement capacity: 20%.
- Application temperature: -10°C to +40°C.
- Skin formation at 23°C/ 50% RH: 5-6 minutes.
- Shrinkage (DIN EN ISO 10563): ≤ 3 %.
- Overpaintable: yes (alkyd resin-based paints will cure with slight delay).
- Relative density: 1.5.
- Temperature resistance after curing: -40°C to +90°C.
- Frost resistance: to -20°C during transport.
- Shelf life: 18 months, stored cool and dry in the original packaging.