Novatio Trimfix WT - aerosol 400ml
€18.29excl. VAT
Available, delivery time: 1-3 Days
Product information "Novatio Trimfix WT - aerosol 400ml"
WEB SPRAY ADHESIVE FOR ROUGH AND POROUS MATERIALS
Sprayable glue in a spray can based on synthetic rubber. Thanks to the combination of the glue and the special spray nozzle, it can be sprayed in a web structure, so that it also offers very good results on rough substrates. Trimfix WT is ideal where brush or other application techniques are not applicable.
Advantages
High immediate adhesive strength on most materials.
Suitable for both permanent and temporary bonding.
Heat-, cold- and moisture-resistant.
Spray pattern adjustable from 2.5 cm to 12 cm.
Use
- Shake well before use and set the spray nozzle.
- Apply to a clean and dry substrate from +/-20cm.
- Apply glue to both sides, leave to dry for 2 to 5 minutes and press together (two layers on very porous materials)
- After use, empty the nozzle by spraying with the can inverted.
Not suitable for bonding polystyrene, PVC film and application areas above 50°C subject to peel forces. Remove excess glue using Novatio Safety Clean.
This spray can is fitted with a rotatable spray nozzle in 3 flow settings: Low, Medium and High.
Technical specifications
- Base: synthetic rubber in a mixture of organic solvents.
- Colour: yellow/transparent.
- Odour: hydrocarbon.
- Specific gravity: 0.8 kg/litre.
- Solids: 15 % +/-1%.
- Drying time: between 10 and 60 minutes.
- Open time: max. 3 minutes.
- Heat resistance 50°C constant - peak load: 100°C.
- Consumption: 5 to 6 m² for a light bond.
- Spray width is adjustable: from +/- 2.5 cm to 12 cm.
- Shelf life: 36 months, dry, cool and frost-free.
- Safety measures: please consult the safety data sheet.