Paint Protectant PROFILINE Hybridcoating CC One 50ml
€99.83incl. VAT
€82.50excl. VAT
Available, delivery time: 1-3 Days
Characteristics
Brand
Sonax
Article numbers
SO267000
Product information "Paint Protectant PROFILINE Hybridcoating CC One 50ml"
One-step long-lasting coating with a high comfort factor. Protects the paintwork for up to 15 months. Simple and quick to apply: apply, wipe off, done! Gives the paintwork an intense colour depth and a dirt-repellent, soft, waxy surface. Set of 4 applicator sponges for 2 applications.
- Vehicle must be scratch-free and completely clean before coating. If necessary, polish by hand or, better still, with a polishing machine to a hologram-free gloss, only with silicone-free polishes from the PROFILINE range.
- Then wipe down with SONAX PROFILINE Prepare and an ultra-fine microfibre cloth.
- Before applying the coating, apply a few drops of CC One to the light side of an applicator pad and apply a thin layer to the paintwork in a crosswise pattern. The area to be treated should be about half a square metre (1/4 of a section).
- After a short reaction time of approx. 3-5 minutes, excess product is wiped off streak-free with a new ultra-fine microfibre cloth. Treat the entire vehicle in this way and then allow the coating to cure for at least 4 hours. The vehicle must be kept in a clean and dry environment at all times and the surfaces must not be touched. If the applicator starts to harden during use of CC One, use a new pad.
- The contents of the tin are sufficient for two complete vehicles.
Tip: Every paint reacts differently. Therefore, first test the reactivity of the coating on a small surface. Treat a small area of 30 x 30 cm and wipe off a corner after 2 minutes. If this is very easy, wait another minute and wipe off another corner. Then again a minute later, until wiping becomes difficult, which means you have found the longest reaction time for the paint. If you leave the coating on too long, it can cause wiping problems, streaks and clouding.
- Vehicle must be scratch-free and completely clean before coating. If necessary, polish by hand or, better still, with a polishing machine to a hologram-free gloss, only with silicone-free polishes from the PROFILINE range.
- Then wipe down with SONAX PROFILINE Prepare and an ultra-fine microfibre cloth.
- Before applying the coating, apply a few drops of CC One to the light side of an applicator pad and apply a thin layer to the paintwork in a crosswise pattern. The area to be treated should be about half a square metre (1/4 of a section).
- After a short reaction time of approx. 3-5 minutes, excess product is wiped off streak-free with a new ultra-fine microfibre cloth. Treat the entire vehicle in this way and then allow the coating to cure for at least 4 hours. The vehicle must be kept in a clean and dry environment at all times and the surfaces must not be touched. If the applicator starts to harden during use of CC One, use a new pad.
- The contents of the tin are sufficient for two complete vehicles.
Tip: Every paint reacts differently. Therefore, first test the reactivity of the coating on a small surface. Treat a small area of 30 x 30 cm and wipe off a corner after 2 minutes. If this is very easy, wait another minute and wipe off another corner. Then again a minute later, until wiping becomes difficult, which means you have found the longest reaction time for the paint. If you leave the coating on too long, it can cause wiping problems, streaks and clouding.
No reviews found. Share your insights with others.