Polishing compound PROFILINE CutMax 250ml
€25.69incl. VAT
€21.23excl. VAT
Available, delivery time: 1-3 Days
Characteristics
Brand
Sonax
Article numbers
SO246141
Product information "Polishing compound PROFILINE CutMax 250ml"
Strongly abrasive polishing paste, removes scratches and inclusions from painted parts or original factory paint. Leaves minimal processing marks and almost no polishing residue. Easy to work with. High material removal with minimal matting at the same time. Removes sanding marks from P1000 sandpaper.
- Shake the bottle before use.
- Apply the product to the SONAX hard foam pad or the SONAX lambswool pad and polish at low speed and increased pressure for approx. 10 seconds; the machine may tilt slightly on deep scratches.
- Then polish for approx. 20 seconds with little pressure, laying the sponge flat.
- Then apply new product to the pad and carry out a new polishing cycle.
- The times given relate to an average hard paint layer and an area to be polished of approx. 50 x 50 cm.
- Remove polishing residue with a SONAX microfibre cloth, ultra-fine.
- Then finish with SONAX PROFILINE Perfect Finish.
NOTE: Do not heat the polishing area. Clean polishing pads regularly and never use different polishing compounds on one pad.
- Shake the bottle before use.
- Apply the product to the SONAX hard foam pad or the SONAX lambswool pad and polish at low speed and increased pressure for approx. 10 seconds; the machine may tilt slightly on deep scratches.
- Then polish for approx. 20 seconds with little pressure, laying the sponge flat.
- Then apply new product to the pad and carry out a new polishing cycle.
- The times given relate to an average hard paint layer and an area to be polished of approx. 50 x 50 cm.
- Remove polishing residue with a SONAX microfibre cloth, ultra-fine.
- Then finish with SONAX PROFILINE Perfect Finish.
NOTE: Do not heat the polishing area. Clean polishing pads regularly and never use different polishing compounds on one pad.
No reviews found. Share your insights with others.