Držáky RAM

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

4411 products found

RAM® brake/clutch reservoir mount with Garmin VIRB™ camera adapter

The RAM-B-174-GA63U consists of hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25", double socket arm and Garmin VIRB™ camera adapter. The brake/clutch reservoir hardware includes both standard and metric mounting bolts. To check whether the base fits your motorcycle, compare the hole spacing of the base with your clutch/brake reservoir. The centre-to-centre spacing of the holes has a minimum width of 0.94" and a maximum of 1.58". The holder is equipped with the patented RAM system with 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for near-infinite adjustability and perfect viewing angles. The adapter attaches directly to the bottom of the camera, replacing the original mounting bracket.

62,31 €*incl. VAT

51,50 €excl. VAT

Více informací

RAM® brake/clutch reservoir mount with LED spotlight

The RAM-B-174-152U consists of a rubber-coated LED spotlight with 1" diameter ball with brake/clutch reservoir and handlebar/rail mounting. The base consists of a 1" diameter rubber ball and hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25". The brake/clutch reservoir hardware includes both standard and metric mounting bolts. Multiple pivot points and the rubber ball and socket technology allow for near-infinite adjustability and perfect positioning angles.

262,00 €*incl. VAT

216,53 €excl. VAT

Více informací

RAM® brake/clutch reservoir mount with round plate & 1/4"-20 threaded stud

The RAM-B-174-202AU consists of hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25", double socket arm and 2.5" diameter round base adapter with a 1/4"-20 male thread for cameras. The brake/clutch reservoir hardware includes both standard and metric mounting bolts. The supplied 1/4"-20 steel threaded stud, centred, with round base provides support and stability for cameras resting on it. The 1/4"-20 steel male threaded stud fits any standard female thread on camcorders and digital cameras. The holder is equipped with the patented RAM system with 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for near-infinite adjustability and perfect viewing angles.

88,89 €*incl. VAT

73,46 €excl. VAT

Více informací

RAM® brake/clutch reservoir mount with universal action camera adapter

The RAM-B-174-GOP1U consists of hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25", double socket arm and 1" diameter ball with a custom-made GoPro® Hero adapter. The brake/clutch reservoir hardware includes both standard and metric mounting bolts. The GoPro® Hero adapter attaches directly to the bottom of the camera, replacing the original mounting bracket. The holder is equipped with the patented RAM system with 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for near-infinite adjustability and perfect viewing angles.

83,47 €*incl. VAT

68,98 €excl. VAT

Více informací

RAM® bronze round AMPS plate with ball

The RAM® bronze round AMPS plate with ball (art. RAM-D-254BU) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.This base or mounting element forms the anchor point of a RAM® setup and is combined with ball, arm and holder into a sturdy assembly.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-254BUOriginal RAM® Mounts part.

189,53 €*incl. VAT

156,64 €excl. VAT

Více informací

RAM® cable manager for large electronic device holders

The RAM® cable manager for large electronic device holders (RAP-402U) creates a clean, protected path for electrical wiring, allowing you to mount a device over a new or existing hole for cable routing. Designed to provide a tidy entry and exit for cables and to hide installation openings, this plate is compatible with all 2.25" ball bases with a three-hole 120° hole pattern. (Note: it is not compatible with AMPS hole patterns.) The durable composite construction acts as a buffer between the surface of the boat and the base of the holder, which helps minimize vibrations and reduce possible damage to fiberglass or gelcoat.

34,11 €*incl. VAT

28,19 €excl. VAT

Více informací

RAM® cable manager with AMPS hole pattern for electronic device holders

The RAM® cable manager with AMPS hole pattern for electronic device holders (RAP-403U) creates an integrated route for electrical wiring and neatly covers installation holes. A great addition to any surface-mounting application. It is made of glass-filled nylon, which has the advantage of creating a barrier between the RAM® surface holder and the mounting area; this minimizes vibrations and reduces damage to fiberglass and gelcoat. This item works with all 2-5/8" round plates with AMPs hole pattern.

23,50 €*incl. VAT

19,42 €excl. VAT

Více informací

RAM® camera mount for glareshield and window

The RAM-B-127 consists of a medium-length B size double socket arm with a round 2.5" diameter plate with the universal AMPS hole pattern and a removable 1/4"-20 threaded post on one side and a glareshield clamp base on the other. The glareshield clamp base is suitable for the edges of glareshields or other sturdy surfaces up to .625" thick.

95,87 €*incl. VAT

79,23 €excl. VAT

Více informací

RAM® centred reservoir cover ball base

The RAM-B-345U brake/clutch reservoir cover ball base fits neatly over your existing reservoir cover with the 1" rubber ball centred. Made of die-cast aluminium with an overmolded rubber ball, both form and function are unmatched. Installation is easy and all required hardware is included. This holder is not compatible with the 2016 BMW R1200RT.

36,98 €*incl. VAT

30,56 €excl. VAT

Více informací

RAM® centred reservoir cover double ball mount

The RAM-B-182U consists of a centred brake/clutch reservoir cover base, double socket arm and diamond adapter base. The diamond adapter base has a hole pattern that matches the industry-standard AMPS hole pattern and fits a wide range of RAM Mount and third-party holders. Integrated into the holder is a patented system with a 1" diameter rubber ball and socket, with adjustment points at the base and the holder. With a turn of the arm knob you can move the reservoir cover holder to your optimal viewing position.

78,24 €*incl. VAT

64,66 €excl. VAT

Více informací

RAM® Cessna seat rail base

The RAM-B-131B Cessna seat rail base is a rail that mounts to a 0.25" or 0.50" NPT threaded tube. Included are two rail connecting bolts that mount to the existing seat rails in the aircraft.

161,12 €*incl. VAT

133,16 €excl. VAT

Více informací

RAM® Cessna seat rail mount with 12" flex arm and diamond plate

The RAM-B-131-238 consists of a Cessna-compatible seat rail base, a rigid 12" long post, a double socket arm and a diamond base adapter. The mount incorporates a patented rubber ball-and-socket system with a 1" diameter ball, with adjustment points at both ends of the socket arm; with a twist of the arm knob you move the mount to your optimal viewing position. The hole pattern on the diamond base adapter fits most RAM cradles.

283,47 €*incl. VAT

234,27 €excl. VAT

Více informací

RAM® Cessna seat rail mount with 12" flex arm and double socket arm

The RAM® Cessna seat rail mount with 12" flex arm and double socket arm (art. RAM-B-131-201) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The base attaches to the seat rail and offers a sturdy anchoring point for building a RAM® ball-and-socket mount in the cockpit or cab.Flexible arm for free positioningFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-131-201Original RAM® Mounts part.

273,39 €*incl. VAT

225,94 €excl. VAT

Více informací

RAM® Cessna seat rail mount with 12" flex arm and round plate

The RAM® Cessna seat rail mount with 12" flex arm and round plate (art. RAM-B-131-202) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The base attaches to the seat rail and offers a sturdy anchoring point for building a RAM® ball-and-socket mount in the cockpit or cab.Flexible arm for free positioningFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-131-202Original RAM® Mounts part.

285,31 €*incl. VAT

235,79 €excl. VAT

Více informací

RAM® Cessna seat rail mount with AMPS hole pattern

The RAM® Cessna seat rail mount with AMPS hole pattern (art. RAM-B-131) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The base attaches to the seat rail and provides a solid anchoring point for building a RAM® ball-and-socket mount in the cockpit or cabin.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-131Original RAM® Mounts part.

284,48 €*incl. VAT

235,11 €excl. VAT

Více informací

RAM® Cessna seat rail mount with Garmin mounting hardware

The RAM® Cessna seat rail mount with Garmin mounting hardware (art. RAM-B-131-G1) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The base attaches to the seat rail and provides a solid anchoring point for building a RAM® ball-and-socket mount in the cockpit or cabin.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-131-G1Original RAM® Mounts part.

294,68 €*incl. VAT

243,54 €excl. VAT

Více informací

RAM® chrome diamond ball base

The chrome-plated base features a 1" diameter rubber ball connected perpendicularly to a 2.43" x 1.31" diamond base. The base has two holes at 1.912" centre-to-centre, positioned at both ends of the diamond base.

41,65 €*incl. VAT

34,42 €excl. VAT

Více informací

RAM® chrome double socket arm - B size medium

The RAM-B-201CHU, chrome double socket arm, has a socket at each end that fits 1" ball bases. A single spring in the arm opens the end sockets, allowing you to tilt the ball-and-socket connection. This socket technology provides virtually infinite adjustment and perfect viewing angles.

97,66 €*incl. VAT

80,71 €excl. VAT

Více informací

RAM® chrome double socket arm – B-size short

The RAM-B-201-ACHU, short chrome double socket arm, has a socket at both ends suitable for a 1" ball, so you can tilt the ball-and-socket connection. This socket technology allows for virtually infinite adjustability and perfect viewing angles.

75,93 €*incl. VAT

62,75 €excl. VAT

Více informací

RAM® chrome double socket arm with diamond base - medium arm

The RAM-B-103-238CHU consists of a CHROME diamond base and a double socket arm that accepts 1" ball bases. The diamond base measures 2.43" x 1.31" and includes two holes 1.912" centre-to-centre, placed at both ends of the diamond base. The hole pattern on the diamond base fits many RAM mounts, as well as third-party mounts, including mounts with the industry-standard AMPS hole pattern.

135,54 €*incl. VAT

112,02 €excl. VAT

Více informací

RAM® chrome double socket arm with diamond base - short arm

The RAM-B-103-A-238CHU consists of a CHROME diamond base and a SHORT double socket arm that accepts 1" ball bases. The diamond base measures 2.43" x 1.31" and includes two holes 1.912" centre-to-centre, placed at both ends of the diamond base. The hole pattern on the diamond base fits many RAM mounts, as well as third-party mounts, including mounts with the industry-standard AMPS hole pattern. The mount incorporates a patented 1" diameter rubber ball-and-socket system with adjustment points at both ends of the socket arm; with a twist of the arm knob you can manoeuvre the mount into your optimal viewing position.

114,93 €*incl. VAT

94,98 €excl. VAT

Více informací

RAM® chrome double socket arm with round plate - medium arm

The RAM-B-103CHU consists of a CHROME round 2.5" base and a double socket arm that accepts 1" ball bases. The round base includes pre-drilled holes, including the universal AMPS hole pattern. The mount incorporates a patented 1" diameter rubber ball-and-socket system with adjustment points at both ends of the socket arm; with a twist of the arm knob you can manoeuvre the mount into your optimal viewing position.

137,08 €*incl. VAT

113,29 €excl. VAT

Více informací

RAM® chrome double socket arm with round plate - short arm

The RAM-B-103CHU-A consists of a 2.5" CHROME round base and a SHORT double socket arm that accepts 1" ball bases. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The mount incorporates a patented 1" diameter rubber ball-and-socket system with adjustment points at both ends of the socket arm; with a twist of the arm knob you can maneuver the mount into your optimal viewing position.

116,26 €*incl. VAT

96,08 €excl. VAT

Více informací

RAM® chrome handlebar U-bolt base for rails from 0.5" to 1" diameter

The RAM-B-231CHU consists of a 1" rubber ball designed to sit perpendicular to the mounting rail. The stainless steel U-bolt fits rails with a diameter of 0.5" to 1.25". The base also includes black end caps that are placed over the exposed ends of the U-bolt.

57,02 €*incl. VAT

47,12 €excl. VAT

Více informací

Zakoupení dílů RAM Mounts

Hledáte robustní a všestranné řešení upevnění elektroniky? Pak je RAM Mounts tou správnou volbou. Tato americká značka je známá svými chytrými, odolnými montážními systémy, které bezpečně udržují vaše elektronická zařízení na místě.

Potřebujete mít telefon, tablet, notebook, skener, kameru, rádio nebo GPS snadno dostupné ve vašem vysokozdvižném vozíku, stohovači nebo reachtrucku? RAM Mounts má řešení pro téměř každou situaci. JVD Parts nabízí širokou škálu dílů RAM Mounts. Podívejte se na nabídku výše a použijte vyhledávací pole nebo filtry pro rychlé nalezení správného produktu. Nejste si jisti výběrem? Rádi vám poskytneme osobní konzultaci.

Zeptejte se nás

Stručná historie RAM Mounts

RAM Mounts vznikly v roce 1990 jako součást National Products Inc. (NPI) v Seattlu, Washington (USA). Značka byla založena s jasným cílem: vytvářet inovativní, univerzální řešení pro upevnění, která fungují v jakémkoli prostředí. Jejich slogan zní “RAM opravuje vše, všude”. To, co začalo jako několik produktů, se rozrostlo do celosvětově dostupného sortimentu tisíců modulárních dílů.

Od začátku si RAM Mounts stanovilo vysoké cíle. Používají pouze kvalitní materiály, jako je hliník, nerezová ocel a odolný kompozit. Ty kombinují s jejich unikátním a patentovaným systémem kloubů. Díky důrazu na kvalitu a inovaci se značka během více než tří desetiletí stala lídrem na trhu.

Inovativní řešení, která dělají rozdíl

Patentovaný systém RAM Mounts je založen na elastomerové, protiskluzové gumové kouli. V kombinaci s dalšími díly tlumí nárazy a vibrace. Modulární design umožňuje nekonečné množství kombinací. Tak můžete vždy vytvořit dokonalé řešení montáže pro váš vysokozdvižný vozík, stohovač, reachtruck nebo jiné stroje pro interní dopravu.

Velikost koule RAM Mounts vybíráte podle zátěže a použití:

B-velikost 1” koule: průměr 2,5cm, nosnost do 1,5 kg
C-velikost 1,5” koule: průměr 3,8cm, nosnost do 2,5 kg
D-velikost 2,25” koule: průměr 5,7cm, nosnost do 3,5 kg
E-velikost 3,38” koule: průměr 8,59cm, nosnost do 9 kg

RAM Mounts tak nabízí řešení pro téměř vše, od vozidel a lodí po průmyslové pracoviště a mobilní aplikace. Existují specifické držáky pro telefony, tablety, GPS systémy, kamery a skenery, ale také univerzální systémy jako populární X-Grip® a Tab-Tite™. Každý produkt je navržen tak, aby vydržel dlouho, i v těch nejnáročnějších podmínkách.

RAM Mounts v interní dopravě

I v interní dopravě RAM Mounts dokazuje svou hodnotu. Vysokozdvižné vozíky, orderpickery, plošiny, to jsou místa, kde je pevné a bezpečné uchycení zařízení klíčové. RAM Mounts vyrábí odolné doky a držáky, které odolávají nárazům a jsou připraveny na intenzivní každodenní používání.

Držáky jsou pro zařízení všech tvarů a velikostí: tablety, ruční počítače, skenery a další. Ať už máte zařízení s nebo bez obalu, vždy existuje vhodné řešení RAM Mounts, které dokonale pasuje do vašeho pracovního prostředí. Udržujte tak své zařízení snadno dostupné a dobře chráněné.

JVD Parts, expert na díly RAM Mounts pro interní dopravu

JVD Parts je součástí rodinné firmy Joris Van Dijck. Máme více než 65 let zkušeností s prodejem, pronájmem a údržbou strojů pro interní dopravu.

Vždy široká nabídka a rychlé dodání díky více než 70.000 dílům na skladě
Jednoduché objednávání v naší uživatelsky přívětivé webové stránce s jasnými filtry
Odpověď na každou technickou otázku od našich zkušených techniků

Kombinujeme kvalitní nabídku RAM Mounts s naším vlastním servisem a odborností. To znamená, že nejen najdete správný díl. Jste si také jistí, že je to řešení pro vaše specifické výzvy.

Takže hledáte trvalá, flexibilní a spolehlivé řešení upevnění? Objednejte si jednoduše díly RAM Mounts online u JVD Parts a přesvědčte se sami o rozdílu.

header.navigation.allCategories

Filtr

Filtr

Držáky RAM

RAM® brake/clutch reservoir mount with Garmin VIRB™ camera adapter

RAM® brake/clutch reservoir mount with LED spotlight

RAM® brake/clutch reservoir mount with round plate & 1/4"-20 threaded stud

RAM® brake/clutch reservoir mount with universal action camera adapter

RAM® bronze round AMPS plate with ball

RAM® cable manager for large electronic device holders

RAM® cable manager with AMPS hole pattern for electronic device holders

RAM® camera mount for glareshield and window

RAM® centred reservoir cover ball base

RAM® centred reservoir cover double ball mount

RAM® Cessna seat rail base

RAM® Cessna seat rail mount with 12" flex arm and diamond plate

RAM® Cessna seat rail mount with 12" flex arm and double socket arm

RAM® Cessna seat rail mount with 12" flex arm and round plate

RAM® Cessna seat rail mount with AMPS hole pattern

RAM® Cessna seat rail mount with Garmin mounting hardware

RAM® chrome diamond ball base

RAM® chrome double socket arm - B size medium

RAM® chrome double socket arm – B-size short

RAM® chrome double socket arm with diamond base - medium arm

RAM® chrome double socket arm with diamond base - short arm

RAM® chrome double socket arm with round plate - medium arm

RAM® chrome double socket arm with round plate - short arm

RAM® chrome handlebar U-bolt base for rails from 0.5" to 1" diameter

Zakoupení dílů RAM Mounts

Stručná historie RAM Mounts

Inovativní řešení, která dělají rozdíl

RAM Mounts v interní dopravě

JVD Parts, expert na díly RAM Mounts pro interní dopravu