Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® vertical 6" swing arm mount with ball

RAM® vertical 6" swing arm mount with ball

The RAM-109V-2BU consists of a 6" long straight swing arm mounted on a vertical surface mounting base. At the free end of the swing arm is a round 1.5" diameter ball. The connection between the swing arm and the base is a bolt pivot point, and the connection between the round plate and the arm is the RAM ball-and-socket system. The bolt pivot point allows a full 360-degree rotation and the ball-and-socket system allows a 180-degree vertical tilt with a 360-degree rotation.

206,74 €*incl. VAT

170,86 €excl. VAT

Více informací

RAM® vertical 6" swing arm mount with fixed socket arm

RAM® vertical 6" swing arm mount with fixed socket arm

The RAM-109V-4U consists of a 6" long curved swing arm with open socket and a vertical surface mounting base. There are two (2) pivot points on the mount: one at the swing arm and base and one in the centre of the open single socket. Each pivot point allows a full 360-degree rotation. The open socket is suitable for all RAM components with a 1.5" diameter ball.

184,61 €*incl. VAT

152,57 €excl. VAT

Více informací

RAM® vertical 6" swing arm mount with rotating socket arm

RAM® vertical 6" swing arm mount with rotating socket arm

The RAM RAM-109VS-4U consists of a single swing arm mount with a 1.5" socket, a 6" long straight swing arm mounted on a vertical surface base. The connection between the swing arm and the base is a bolt pivot point. The open socket end accepts mounting bases with a 1.5" diameter RAM ball, enabling a versatile RAM ball-and-socket system. The bolt pivot point allows a full 360-degree rotation and the ball-and-socket system allows a 180-degree vertical tilt with a 360-degree rotation.

135,37 €*incl. VAT

111,88 €excl. VAT

Více informací

RAM® vertical Drill-Down vehicle base

RAM® vertical Drill-Down vehicle base

The RAM® vertical Drill-Down vehicle base is a fixed-mount mounting base from RAM Mounts.This Drill-Down base is drilled firmly into the cab floor or a surface, providing a sturdy vertical mounting point for a pole and holder. Ideal for commercial vehicles and material handling.Vertical Drill-Down vehicle baseFixed mounting for a sturdy support pointFor vehicles and material handlingOriginal RAM Mounts part.

81,52 €*incl. VAT

67,37 €excl. VAT

Více informací

RAM® vertical Drill-Down vehicle base with lower RAM® Tele-Pole™

RAM® vertical Drill-Down vehicle base with lower RAM® Tele-Pole™

The RAM® vertical Drill-Down vehicle base with lower RAM® Tele-Pole™ is a mounting base with an extendable pole from RAM Mounts.This Drill-Down base is fixed firmly to the cab floor and, with the Tele-Pole, provides a height-adjustable pole to position a holder ergonomically. Ideal for commercial vehicles and material handling.Vertical Drill-Down vehicle baseWith lower RAM® Tele-Pole™For vehicles and material handlingOriginal RAM Mounts part.

74,89 €*incl. VAT

61,89 €excl. VAT

Více informací

RAM® vertical Drill-Down vehicle base without poles

RAM® vertical Drill-Down vehicle base without poles

The RAM® vertical Drill-Down vehicle base without poles is a fixed-mount mounting base from RAM Mounts.This Drill-Down base is drilled firmly into the cab floor and forms the substructure on which you mount a pole and holder of your choice; poles are supplied separately. Ideal for commercial vehicles and material handling.Vertical Drill-Down vehicle baseWithout poles (available separately)For vehicles and material handlingOriginal RAM Mounts part.

63,83 €*incl. VAT

52,75 €excl. VAT

Více informací

RAM® vertical mounting base with 1/2" NPT post

RAM® vertical mounting base with 1/2" NPT post

The RAM-304B-VP is a 1/2" NPT post with a drill-down base for vertical surfaces.

229,78 €*incl. VAT

189,90 €excl. VAT

Více informací

RAM® vertical ratchet base with ball

RAM® vertical ratchet base with ball

The RAM® vertical ratchet base with ball (art. RAM-162V-MC4) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The Ratchet™ mechanism allows the arm to be locked in fixed positions to absorb vibrations, ideal in rough environments such as forklifts and off-road vehicles.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-162V-MC4Original RAM® Mounts part.

418,27 €*incl. VAT

345,68 €excl. VAT

Více informací

RAM® vertical swing arm base

RAM® vertical swing arm base

The RAM-109V-B is a through-bolt base for vertical surfaces that is compatible with our swing arms from the 109 series.

54,27 €*incl. VAT

44,85 €excl. VAT

Více informací

RAM® vertical swing holder with socket arm

RAM® vertical swing holder with socket arm

The RAM-D-162V-MC3 consists of a swing arm with open socket and a vertical mounting base. There are two (2) pivot points on the holder: one at the swing arm and base and one in the middle of the open single socket. Each pivot point allows a full rotation of 360 degrees. The open socket is suitable for all RAM parts with a ball of 2.25" diameter.

460,99 €*incl. VAT

380,98 €excl. VAT

Více informací

RAM® vertical swivel base

RAM® vertical swivel base

The RAM® vertical swivel base (art. RAM-D-162VU) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.The socket arm connects two balls and lets you adjust the angle and position of the device continuously; with the clamp knob you lock everything vibration-proof.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-162VUOriginal RAM® Mounts part.

120,67 €*incl. VAT

99,73 €excl. VAT

Více informací

RAM® vertical swivel base

RAM® vertical swivel base

The RAM® vertical swivel base (art. RAM-D-162V1U) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.The socket arm connects two balls and lets you adjust the angle and position of the device continuously; with the clamp knob you lock everything vibration-proof.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-162V1UOriginal RAM® Mounts part.

88,69 €*incl. VAT

73,30 €excl. VAT

Více informací

RAM® Vibe-Safe™ with NPT adapter for holders with 2 holes

RAM® Vibe-Safe™ with NPT adapter for holders with 2 holes

The RAM® Vibe-Safe™ adapter for holders with 2 holes (RAP-462NPT) is a vibration-dampening accessory designed to protect electronic devices against a wide range of vibration frequencies. The RAM® Vibe-Safe™ is based on an NPT connection point and offers the versatility to rotate between portrait and landscape while keeping your device secure in rugged environments. This adapter is compatible with most RAM® holders with 2 holes, including the RAM® Quick-Grip™, RAM® Tough-Charge™, RAM® Quick-Charge™ and RAM® Form-Fit holders. The RAM® Vibe-Safe™ is only compatible with the metal diamond ball adapter (RAM-B-238U).

66,61 €*incl. VAT

55,05 €excl. VAT

Více informací

RAM® wall plate with angled PVC tube socket

RAM® wall plate with angled PVC tube socket

The RAM® wall plate with angled PVC tube socket is a mounting base from the RAM Mounts system.This wall plate with angled PVC tube socket provides an angled attachment point to mount a tube or holder at an adjustable angle. Ideal for mounting to walls and panels in vehicles and material handling.Wall plate with angled PVC tube socketAngled mounting pointFor vehicles and material handlingOriginal RAM Mounts part.

20,34 €*incl. VAT

16,81 €excl. VAT

Více informací

RAM® wedge ball adapter for RAM®, Attwood & Fish-on bases - B-size

RAM® wedge ball adapter for RAM®, Attwood & Fish-on bases - B-size

Simple and versatile, the new RAM ball-wedge holders are a great way to provide a mounting point virtually anywhere. Simply slide the wedge into the round opening of your rod holder base and tighten the screw. The new RAM ball-wedge base expands to accommodate holes with a diameter of 3/4" to 7/8" and locks tightly.

23,01 €*incl. VAT

19,02 €excl. VAT

Více informací

RAM® wedge ball adapter for RAM®, Attwood and Fish-on bases - C size

RAM® wedge ball adapter for RAM®, Attwood and Fish-on bases - C size

The RAM® wedge ball adapter for RAM®, Attwood and Fish-on bases in C size is a connecting adapter from RAM Mounts.This wedge ball adapter connects a RAM ball in C size to RAM, Attwood or Fish-on bases, so you can combine different systems. Ideal for flexible mounting on watercraft and in vehicles.Wedge ball adapter - C sizeFor RAM, Attwood and Fish-on basesFor watercraft and material handlingOriginal RAM Mounts part.

29,87 €*incl. VAT

24,69 €excl. VAT

Více informací

RAM® wedge ball adapter for Scotty and Hobie Sail Port base - B size

RAM® wedge ball adapter for Scotty and Hobie Sail Port base - B size

Simple and versatile, the new RAM® wedge ball mounts are an excellent way to provide a mounting point virtually anywhere. Simply slide the wedge into the round opening of your rod holder base and tighten the screw. The new RAM® wedge ball base expands to accommodate holes of 7/8”- 1” diameter and locks firmly in place.

21,94 €*incl. VAT

18,13 €excl. VAT

Více informací

RAM® wedge ball adapter for Scotty and Hobie Sail Port base - C size

RAM® wedge ball adapter for Scotty and Hobie Sail Port base - C size

Simple and versatile, the new RAM ball-wedge holders are a great way to add a mounting point to virtually anything. Simply slide the wedge into the round opening of your rod holder base and tighten the screw. The new RAM ball-wedge base expands to accommodate holes of 7/8"-1" diameter and locks firmly. Once installed, you have the perfect way to mount anything, from RAM rod holders, GPS, mobile phone, cup holder, fishfinder or torch, all of which can be supported and perfectly positioned with this great new product.

31,51 €*incl. VAT

26,04 €excl. VAT

Více informací

RAM® Wedge-Lock™ adapter for RAM® Stack-N-Stow™

RAM® Wedge-Lock™ adapter for RAM® Stack-N-Stow™

The RAM® Wedge-Lock™ adapter for RAM® Stack-N-Stow™ (art. RAP-395WU) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The ball adapter adds a RAM® ball to a base or device, so that it can be incorporated into the RAM® ball-and-socket system. This allows you to flexibly and vibration-free connect a wide range of parts to each other.Ball/plate adapter for the RAM® ball-and-socket systemFor flexible coupling of base and holderOriginal RAM Mounts part.

5,80 €*incl. VAT

4,79 €excl. VAT

Více informací

RAM® Wedge-Lock™ ball base for RAM® Stack-N-Stow™

RAM® Wedge-Lock™ ball base for RAM® Stack-N-Stow™

The RAP-395W-BBU consists of a 1" ball, connected to a wedge-shaped base that slides onto and locks to the side of RAM STACK-N-STOW™ bait boards.

15,42 €*incl. VAT

12,74 €excl. VAT

Více informací

RAM® weighted composite square platform base with AMPS hole pattern

RAM® weighted composite square platform base with AMPS hole pattern

The RAP-251-1U is a square 9" x 9" high-strength composite weighted base for flat surfaces, and is ideal for displaying RAM® products with the universal AMPS hole pattern.

287,44 €*incl. VAT

237,55 €excl. VAT

Více informací

RAM® weighted platform base with 4-hole pattern for GDS® pedestal docks

RAM® weighted platform base with 4-hole pattern for GDS® pedestal docks

The RAM® weighted platform base with 4-hole pattern for GDS® pedestal docks (RAP-251-2U) is a drill-free solution that allows the GDS® pedestal dock to be placed on any flat surface. The 8-pound cast iron insert provides a solid base for the mounted device.

306,69 €*incl. VAT

253,46 €excl. VAT

Více informací

RAM® worm-drive band clamp for Northrop Grumman

RAM® worm-drive band clamp for Northrop Grumman

The RAM® worm-drive band clamp for Northrop Grumman is a clamp band mount tailored to this specific application.This worm-drive band clamp tightens around a tube or steering structure, forming a solid mounting point for a RAM Mounts holder. Ideal for mounting in vehicles and cockpits.Worm-drive band clampFor Northrop Grumman applicationFor vehicles and cockpitsOriginal RAM Mounts part.

15,58 €*incl. VAT

12,88 €excl. VAT

Více informací

RAM® worm-drive hose clamp for Beechcraft Bonanza aircraft

RAM® worm-drive hose clamp for Beechcraft Bonanza aircraft

The RAM® worm-drive hose clamp for Beechcraft Bonanza aircraft is a clamp band mount tailored to this aircraft application.This worm-drive hose clamp tightens around a tube or control structure, forming a sturdy mounting point for a RAM Mounts holder. Ideal for mounting in cockpits and vehicles.Worm-drive hose clampFor Beechcraft Bonanza applicationFor vehicles and cockpitsOriginal RAM Mounts part.

13,73 €*incl. VAT

11,35 €excl. VAT

Více informací