Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM-A-SNACK™

RAM-A-SNACK™

The RAM-A-SNACK™ (art. RAP-318U) is an original RAM Mounts mounting part for securely and vibration-free attaching devices.The drink holder clips onto the RAM® ball-and-socket system and holds a cup or bottle steady within reach in a vehicle, boat or work environment. Ideal when you want to secure a drink safely on the go.Compatible with the RAM® ball-and-socket systemFor use in vehicles, boats and workshopsOriginal RAM Mounts part.

15,03 €*incl. VAT

12,42 €excl. VAT

Více informací

RAM® 0-degree 1/2" NPT threaded hole with round base

RAM® 0-degree 1/2" NPT threaded hole with round base

The RAM-232-0U consists of a 2.5" diameter base with 1/2" NPT female thread at a 0-degree angle relative to the base. This part fits any 1/2" NPT male thread, including the rigid RAM-PA82XX arm series.

41,27 €*incl. VAT

34,11 €excl. VAT

Více informací

RAM® 0-degree 1/4" NPT threaded hole with round base

RAM® 0-degree 1/4" NPT threaded hole with round base

The RAM® 0-degree 1/4" NPT threaded hole with round base (art. RAM-B-232-0U) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.This base or mounting element forms the anchoring point of a RAM® setup and is combined with ball, arm and holder into a sturdy whole.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-232-0UOriginal RAM® Mounts part.

37,03 €*incl. VAT

30,60 €excl. VAT

Více informací

RAM® 1" - 1 1/4" stainless steel U-bolt

RAM® 1" - 1 1/4" stainless steel U-bolt

The RAM® stainless steel U-bolt from 1" to 1 1/4" is a mounting bracket for rail mounting of RAM Mounts holders.This stainless steel U-bolt tightens around tubes or bars with a diameter of 1" to 1 1/4", forming a solid, corrosion-resistant mounting point. Ideal for mounting on vessels, in vehicles and material handling.Stainless steel U-bolt for 1" - 1 1/4" tubesCorrosion-resistant rail mountingFor vehicles and material handlingOriginal RAM Mounts part.

7,78 €*incl. VAT

6,43 €excl. VAT

Více informací

RAM® 1" composite filler faceplate

RAM® 1" composite filler faceplate

The RAM® 1" composite filler faceplate (art. RAP-FP-1-FILLER) is an original RAM Mounts mounting component for securely and vibration-free mounting of devices.The ball adapter adds a RAM® ball to a base or device, so it can be integrated into the RAM® ball-and-socket system. This lets you connect various components flexibly and vibration-free.Ball/plate adapter for the RAM® ball-and-socket systemFor flexible connection of base and mountOriginal RAM Mounts part.

18,11 €*incl. VAT

14,97 €excl. VAT

Více informací

RAM® 1" NPT end cap

RAM® 1" NPT end cap

The RAM® 1" NPT end cap is a closing cap for RAM Mounts pipe and pole systems with 1" NPT thread.This end cap neatly closes an open pipe end and protects the thread against dirt and damage. Handy when finishing off mounting poles and pipe constructions in vehicles and material handling.End cap with 1" NPT threadCloses pipe endsFor vehicles and material handlingOriginal RAM Mounts part.

5,00 €*incl. VAT

4,13 €excl. VAT

Více informací

RAM® 1" NPT female threaded hole with ball

RAM® 1" NPT female threaded hole with ball

The RAM® 1" NPT female threaded hole with ball (art. RAM-D-218-1) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.The part is part of the modular RAM® ball-and-socket system and holds equipment vibration-proof and adjustable in place.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-218-1Original RAM® Mounts part.

124,94 €*incl. VAT

103,26 €excl. VAT

Více informací

RAM® 1" NPT hole and ratchet adapter with male spline

RAM® 1" NPT hole and ratchet adapter with male spline

The RAM® 1" NPT hole and ratchet adapter with male spline (art. RAM-D-284U) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.The Ratchet™ mechanism allows the arm to be locked in fixed positions to absorb vibrations, ideal in rough environments such as forklifts and off-road vehicles.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-284UOriginal RAM® Mounts part.

137,50 €*incl. VAT

113,64 €excl. VAT

Více informací

RAM® 1" NPT hole with 3.5" x 3.5" square base

RAM® 1" NPT hole with 3.5" x 3.5" square base

The RAM® 1" NPT hole with 3.5" x 3.5" square base (art. RAM-D-299-SBU) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.This base or mounting element forms the anchor point of a RAM® setup and is combined with ball, arm and holder into a sturdy assembly.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-299-SBUOriginal RAM® Mounts part.

154,29 €*incl. VAT

127,51 €excl. VAT

Více informací

RAM® 1" NPT hole with 5" x 5" square base

RAM® 1" NPT hole with 5" x 5" square base

The RAM® 1" NPT hole with 5" x 5" square base (art. RAM-D-299U) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.This base or mounting element forms the anchor point of a RAM® setup and is combined with ball, arm and holder into a sturdy assembly.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-299UOriginal RAM® Mounts part.

197,05 €*incl. VAT

162,85 €excl. VAT

Více informací

RAM® 1" NPT post and ratchet adapter with female spline

RAM® 1" NPT post and ratchet adapter with female spline

The RAM® 1" NPT post and ratchet adapter with female spline (art. RAM-D-285U) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.The Ratchet™ mechanism allows the arm to be locked in fixed positions to absorb vibrations, ideal in rough environments such as forklifts and off-road vehicles.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-285UOriginal RAM® Mounts part.

136,32 €*incl. VAT

112,66 €excl. VAT

Více informací

RAM® 1" NPT post with horizontal base

RAM® 1" NPT post with horizontal base

The RAM® 1" NPT post with horizontal base (art. RAM-D-304B-HP) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.This base or mounting element forms the anchoring point of a RAM® setup and is combined with ball, arm and holder into a sturdy assembly.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-304B-HPOriginal RAM® Mounts part.

148,61 €*incl. VAT

122,82 €excl. VAT

Více informací

RAM® 1" NPT post with vertical base

RAM® 1" NPT post with vertical base

The RAM® 1" NPT post with vertical base (art. RAM-D-304B-VP) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.This base or mounting element forms the anchor point of a RAM® setup and is combined with ball, arm and holder into a sturdy assembly.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-304B-VPOriginal RAM® Mounts part.

203,59 €*incl. VAT

168,26 €excl. VAT

Více informací

RAM® 1" risers for RAM® Tab-Tite™ and RAM® Tab-Lock™ holders

RAM® 1" risers for RAM® Tab-Tite™ and RAM® Tab-Lock™ holders

Spacer risers provide additional height to RAM holders and accommodate extra space for tablets with support accessories such as hand straps and stands. With an addition of 1" in height, spacer risers are the perfect accessory for IntelliSkin® cases with Hand-Stand™ tablet hand strap and stand. The included mounting hardware allows easy attachment to RAM Tab mounting plates.

19,15 €*incl. VAT

15,83 €excl. VAT

Více informací

RAM® 1/2" NPT flange adapter for swing arms

RAM® 1/2" NPT flange adapter for swing arms

The RAM® 1/2" NPT flange adapter for swing arms (art. RAM-227U) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.The socket arm connects two balls and lets you set the angle and position of the device steplessly; with the clamp knob you secure everything vibration-proof.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-227UOriginal RAM® Mounts part.

33,52 €*incl. VAT

27,70 €excl. VAT

Více informací

RAM® 1/2" NPT hole and ratchet adapter with external teeth

RAM® 1/2" NPT hole and ratchet adapter with external teeth

The RAM® 1/2" NPT hole and ratchet adapter with external teeth (art. RAM-284U) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The Ratchet™ mechanism allows the arm to be locked in fixed positions to absorb vibrations, ideal in rough environments such as forklifts and off-road vehicles.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-284UOriginal RAM® Mounts part.

76,23 €*incl. VAT

63,00 €excl. VAT

Více informací

RAM® 1/2" NPT post and ratchet adapter with female teeth

RAM® 1/2" NPT post and ratchet adapter with female teeth

The RAM® 1/2" NPT post and ratchet adapter with female teeth (art. RAM-285U) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The Ratchet™ mechanism allows the arm to be locked in fixed positions to absorb vibrations, ideal in rough environments such as forklifts and off-road vehicles.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-285UOriginal RAM® Mounts part.

66,05 €*incl. VAT

54,59 €excl. VAT

Více informací

RAM® 1/2" NPT threaded hole with female thread and ball

RAM® 1/2" NPT threaded hole with female thread and ball

The RAM-218-1U consists of a 1.5" ball and 0.5" NPT female thread. This part fits any 0.5" NPT male thread, including the holders from the rigid RAM-PA82xx arm series.

33,67 €*incl. VAT

27,83 €excl. VAT

Více informací

RAM® 1/2" risers for RAM® Tab-Tite™ and RAM® Tab-Lock™ holders

RAM® 1/2" risers for RAM® Tab-Tite™ and RAM® Tab-Lock™ holders

Spacer risers provide extra height to RAM holders and accommodate additional space for tablets with support accessories such as hand straps and stands. With an addition of 0.5" of space, spacer risers are the perfect accessory for RAM Tab-Tite™ and Tab-Lock™ holders. The included mounting hardware allows easy attachment to RAM Tab mounting plates.

13,03 €*incl. VAT

10,77 €excl. VAT

Více informací

RAM® 1/4" NPT female-threaded hole with ball

RAM® 1/4" NPT female-threaded hole with ball

The RAM-B-218-1U consists of a 1" ball and 0.25" NPT female thread. This part fits any 0.25" NPT male thread, including the RAM-PF-585-X flex-arm series holders and the RAM-PA54XX rigid-arm series holders.

25,91 €*incl. VAT

21,41 €excl. VAT

Více informací

RAM® 10.5" double socket arms - long & medium B size

RAM® 10.5" double socket arms - long & medium B size

The RAM-B-201-201U-C consists of a standard-length double socket arm, a long double socket arm and a dual ball adapter that joins the two arms together. A single spring in the arm opens the end sockets, allowing you to tilt the ball-and-socket connection. This socket technology provides virtually infinite adjustment and perfect viewing angles.

96,52 €*incl. VAT

79,77 €excl. VAT

Více informací

RAM® 10' long cable with bare wire ends

RAM® 10' long cable with bare wire ends

The RAM® 10' long cable with bare wire ends (art. RAM-234-WHEU) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.This accessory provides the power or signal supply for the mounted equipment and complements the RAM® mounting system when installed in vehicles and forklifts.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-234-WHEUOriginal RAM® Mounts part.

32,03 €*incl. VAT

26,47 €excl. VAT

Více informací

RAM® 10' power cable with female cigarette charger

RAM® 10' power cable with female cigarette charger

This hardwire installation kit is designed to allow the permanent installation of any cigarette charger. The 10' long cable is designed to run either to the vehicle battery or to a fuse panel for a permanent hardwire power installation. The kit includes a female cigarette plug, a 10' non-coiled cable and two ring terminals with an inner diameter of .31".

24,38 €*incl. VAT

20,15 €excl. VAT

Více informací

RAM® 100mm & 75mm VESA to AMPS hole pattern adapter plate

RAM® 100mm & 75mm VESA to AMPS hole pattern adapter plate

The RAM® 100mm & 75mm VESA to AMPS hole pattern adapter plate (RAM-GDS-DOCK-D10V-C-GRY) is a versatile adapter that can easily be integrated into your mounting system to provide extra clearance for device holders.

22,98 €*incl. VAT

18,99 €excl. VAT

Více informací