Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® ball adapter with AMPS plate and 7mm holes

The RAM-B-347U-BT base consists of a 1" diameter rubber ball connected at a right angle to a 2" x 1.7" square base. The base includes four pre-drilled 7mm holes in each corner.

22,13 €*incl. VAT

18,29 €excl. VAT

Více informací

RAM® ball adapter with AMPS plate for Garmin GPSMAP 620 & 640

The RAM-B-347-G4 base consists of a 1" diameter rubber ball connected at a right angle to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, forming the universal 1.5 x 1.188 (hole spacing) AMPS hole pattern.

21,63 €*incl. VAT

17,88 €excl. VAT

Více informací

RAM® ball adapter with AMPS plate for TomTom Bridge, Rider 2 + more

The RAM-B-347U-TOM1 connects to the back of the factory mount supplied with the purchase of the TomTom Rider 2/Urban Rider. The screws supplied with the RAM-B-347U-TOM1 fit the thread on the back of the RIDER 2/Urban Rider.

20,80 €*incl. VAT

17,19 €excl. VAT

Více informací

RAM® ball adapter with female thread for Motorola ES400, MC45 & TC55

The RAM-B-202U-MOTO2 consists of a 1” ball with female-threaded adapter base, and attaches to the back of the factory holders of the Motorola ES400, MC45 and TC55.

26,38 €*incl. VAT

21,80 €excl. VAT

Více informací

RAM® ball adapter with Flex-Rod™ receiver

The RAM® ball adapter with Flex-Rod™ receiver (art. RAP-B-114-FRBBU) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The ball adapter adds a RAM® ball to a base or device so it can be integrated into the RAM® ball-and-socket system. This lets you connect a variety of components flexibly and vibration-free.Ball/plate adapter for the RAM® ball-and-socket systemFor flexible connection of base and holderOriginal RAM Mounts part.

20,04 €*incl. VAT

16,56 €excl. VAT

Více informací

RAM® ball adapter with hardware for flat panel

The RAM-238-FP2U consists of a diamond base with a 1.5" diameter ball and the hardware needed to mount the base on a flat panel.

28,02 €*incl. VAT

23,16 €excl. VAT

Více informací

RAM® ball adapter with hardware for Garmin StreetPilot

The RAM® ball adapter with hardware for Garmin StreetPilot (art. RAM-B-145BU) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.This adapter connects various RAM® components to each other, expanding the mounting possibilities of the ball-and-socket system.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-145BUOriginal RAM® Mounts part.

42,50 €*incl. VAT

35,12 €excl. VAT

Více informací

RAM® ball adapter with hardware for Raymarine Dragonfly – C size

The RAM-202U-RYM1 consists of a 1.5" diameter rubber ball connected to a 2.5" diameter flat base. The base has pre-drilled holes, including the universal AMPS hole pattern. Included are (3 pcs) (#8-32 x 3/4" PH PD machine screws) and (3 pcs) (#8-32 SS Nylock nuts) that connect the RAM-202U-RYM1 to the bottom of all Raymarine® Dragonfly™ Sonar/GPS devices.

33,73 €*incl. VAT

27,88 €excl. VAT

Více informací

RAM® Ball Adapter with Inside RAM ROD® Ratchet

The RAM ROD® inside ratchet adapter allows the direct attachment of a 1.5” RAM ball to any of RAM's many rod holders that use the tooth-and-groove system. The groove ball adapter can be attached directly to the rod holder extension, as well as to the short and standard rod holder post extensions. This allows the attachment of a ball-and-socket rod holder to the end of a rod holder extension, the pinnacle of rod holder functionality and adjustability.

22,94 €*incl. VAT

18,96 €excl. VAT

Více informací

RAM® ball adapter with M10-1.25 threaded post - B size

The RAM-B-349U features an M10 x 1.25 pitch male thread connected to a 1" rubber ball. The screw hole must have the following dimensions for this base to fit: M10 1.25 pitch with a flange diameter of 14.5mm and a thread length of 10.15mm.

21,15 €*incl. VAT

17,48 €excl. VAT

Více informací

RAM® ball adapter with M10-1.5 threaded post

The RAM-B-349-1U includes an M10 x 1.5 male thread connected to a 1" rubber ball. The round flange diameter is 14.3mm and the thread length is 10.5mm.

21,19 €*incl. VAT

17,51 €excl. VAT

Více informací

RAM® ball adapter with M6 x 1 female-threaded hole

The RAM-B-273-M6U features a hexagonal M6 x 1 female-threaded hole connected to a 1" rubber ball.

16,13 €*incl. VAT

13,33 €excl. VAT

Více informací

RAM® ball adapter with M8 threaded stud

The RAM-370U is a 1.5" diameter C size ball with an M8-1 x 50mm threaded stud.

165,89 €*incl. VAT

137,10 €excl. VAT

Více informací

RAM® ball adapter with mounting hardware for flat panel - 3/4" screws

The RAM® ball adapter with mounting hardware for flat panel - 3/4" screws (art. RAM-B-238-FP1U) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.This adapter couples various RAM® components together, thereby expanding the mounting possibilities of the ball-and-socket system.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-238-FP1UOriginal RAM® Mounts part.

18,08 €*incl. VAT

14,94 €excl. VAT

Více informací

RAM® ball adapter with mounting hardware for flat panel - 3/8" screws

The RAM® ball adapter with mounting hardware for flat panel - 3/8" screws (art. RAM-B-238-FP2U) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.This adapter couples various RAM® components to each other and thus expands the mounting possibilities of the ball-and-socket system.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-238-FP2UOriginal RAM® Mounts part.

18,51 €*incl. VAT

15,30 €excl. VAT

Více informací

RAM® ball adapter with mounting hardware for Raymarine Dragonfly - B size

The RAM-B-202U-RYM1 consists of a 1" diameter rubber ball connected to a 2.5" diameter flat base. The base has pre-drilled holes, including the universal AMPS hole pattern. Included are (3 pieces) (#8-32 x 3/4" PH PD machine screws) and (3 pieces) (#8-32 SS Nylock nuts) that connect the RAM-B-202U-RYM1 to the bottom of all Raymarine® Dragonfly™ Sonar/GPS devices.

22,64 €*incl. VAT

18,71 €excl. VAT

Více informací

RAM® ball adapter with mounting hardware for TomTom 300 & 700

The RAM-B-202U-TO1 consists of a 1" diameter rubber ball connected to a custom-made adapter base for the TomTom 300 and 700. This part is compatible with all double socket arms with 1" diameter ball and includes hardware to attach to TomTom 300/700 devices.

39,47 €*incl. VAT

32,62 €excl. VAT

Více informací

RAM® Ball Adapter with Outside RAM ROD® Ratchet

The RAM ROD® outside ratchet adapter allows the direct attachment of a 1.5” RAM ball to any of RAM's many rod holders that use the tooth-and-groove system. The groove ball adapter can be attached directly to the rod holder extension, as well as to the short and standard rod holder post extensions. This allows the attachment of a ball-and-socket rod holder to the end of a rod holder extension, the pinnacle of rod holder functionality and adjustability.

22,43 €*incl. VAT

18,54 €excl. VAT

Více informací

RAM® ball adapter with round plate and 1/4"-20 threaded stud - B size

The RAM-B-202AU, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a 2.5" diameter round plate with 1/4"-20 camera thread. The round plate provides additional support and stability for cameras resting on it. The steel threaded stud with 1/4"-20 external thread fits any standard internal thread on camcorders and digital cameras.

25,53 €*incl. VAT

21,10 €excl. VAT

Více informací

RAM® ball adapter with round plate and 1/4"-20 threaded stud – C size

The RAM-202AU consists of a 1.5" rubber ball connected to a round base with a 2.5" diameter. Also included is a centred 1/4"-20 steel threaded stud; the round base provides support and stability for cameras resting on it. The 1/4"-20 steel male-threaded stud fits any standard female thread on camcorders and digital cameras.

37,33 €*incl. VAT

30,85 €excl. VAT

Více informací

RAM® ball adapter with round plate and 3/8"-16 threaded hole

The RAM-202CNSU consists of a rubber ball with a 1.5" diameter connected to a flat base with a 2.5" diameter with a 3/8"-16 female-threaded hole. This holder has pre-drilled holes, including the universal AMPS hole pattern.

32,32 €*incl. VAT

26,71 €excl. VAT

Více informací

RAM® ball adapter with round plate and 3/8"-16 threaded stud

The RAM camera base includes a 1.5" rubber ball connected to a round base with a 2.5" diameter. Also included is a centred 3/8"-16 steel threaded stud; the round base provides support and stability for cameras resting on it. The 3/8"-16 steel male-threaded stud fits any standard female thread on camcorders and digital cameras.

40,80 €*incl. VAT

33,72 €excl. VAT

Více informací

RAM® ball base for Crown Work Assist® - D size

The Crown ball base features mounting holes aligned to work with Crown Work Assist® clamp accessories. By adding the RAM mounting system you can position your accessories for the best accessibility and prevent damage from shocks and vibrations.

62,64 €*incl. VAT

51,77 €excl. VAT

Více informací

RAM® ball base for Crown Work Assist® – C size

The Crown ball base contains mounting holes that are aligned to work with the clamp accessories of Crown Work Assist®. Thanks to the addition of the RAM mounting system, you can position your accessories for the best access and prevent damage from shocks and vibrations.

55,99 €*incl. VAT

46,27 €excl. VAT

Více informací

header.navigation.allCategories

Filtr

Filtr

Montagecomponenten

RAM® ball adapter with AMPS plate and 7mm holes

RAM® ball adapter with AMPS plate for Garmin GPSMAP 620 & 640

RAM® ball adapter with AMPS plate for TomTom Bridge, Rider 2 + more

RAM® ball adapter with female thread for Motorola ES400, MC45 & TC55

RAM® ball adapter with Flex-Rod™ receiver

RAM® ball adapter with hardware for flat panel

RAM® ball adapter with hardware for Garmin StreetPilot

RAM® ball adapter with hardware for Raymarine Dragonfly – C size

RAM® Ball Adapter with Inside RAM ROD® Ratchet

RAM® ball adapter with M10-1.25 threaded post - B size

RAM® ball adapter with M10-1.5 threaded post

RAM® ball adapter with M6 x 1 female-threaded hole

RAM® ball adapter with M8 threaded stud

RAM® ball adapter with mounting hardware for flat panel - 3/4" screws

RAM® ball adapter with mounting hardware for flat panel - 3/8" screws

RAM® ball adapter with mounting hardware for Raymarine Dragonfly - B size

RAM® ball adapter with mounting hardware for TomTom 300 & 700

RAM® Ball Adapter with Outside RAM ROD® Ratchet

RAM® ball adapter with round plate and 1/4"-20 threaded stud - B size

RAM® ball adapter with round plate and 1/4"-20 threaded stud – C size

RAM® ball adapter with round plate and 3/8"-16 threaded hole

RAM® ball adapter with round plate and 3/8"-16 threaded stud

RAM® ball base for Crown Work Assist® - D size

RAM® ball base for Crown Work Assist® – C size