Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® clamp base for square post up to 2.5" wide - E-size

RAM® clamp base for square post up to 2.5" wide - E-size

The RAM® clamp base for square post up to 2.5" wide - E-size (art. RAM-E-247U-25) is a mounting component from the modular RAM® Mounts system for securely fastening equipment in vehicles, forklifts and material handling.The clamp grips around a tube, edge or bar and forms a movable mounting point in the RAM® system, quick to attach without tools or drilling.Clamp mounting without drillingFor vehicles, forklifts and material handlingAlso known under reference: RAM-E-247U-25Original RAM® Mounts part.

132,07 €*incl. VAT

109,15 €excl. VAT

Více informací

RAM® clamp base for square post up to 2" wide - D size

RAM® clamp base for square post up to 2" wide - D size

The RAM-D-247U-2 consists of a 2" clamp base with 2.25" ball.

71,49 €*incl. VAT

59,08 €excl. VAT

Více informací

RAM® clamp base for square post up to 3" wide - D size

RAM® clamp base for square post up to 3" wide - D size

The RAM-D-247U-3 consists of a 3" clamp base with 2.25" ball.

95,55 €*incl. VAT

78,97 €excl. VAT

Více informací

RAM® clamp base for square post up to 4" wide - D size

RAM® clamp base for square post up to 4" wide - D size

This mount for square posts is ideal for installation on forklifts and consists of a 4" clamp base with a 2.25" ball in D size. Attach a D size socket arm of any length, a D size ball adapter and a device holder of your choice for an ultra-rugged mounting solution for your forklift. Although the base handles posts up to a maximum width of 4", it can also accommodate any smaller width by rotating the base on the post so that the mounting bolts sit snugly against the post.

95,78 €*incl. VAT

79,16 €excl. VAT

Více informací

RAM® clamp base for square posts 1.75" - 4" wide - D size

RAM® clamp base for square posts 1.75" - 4" wide - D size

The RAM-D-247U is a clamp base with a 2.25" rubber ball that fits square posts with a width of 1.75" to 4". Ideal for forklifts: the slotted holes on this base make this variant the most universal clamp base option, compatible with vehicle-mounted computers and rugged tablet PCs.

100,39 €*incl. VAT

82,97 €excl. VAT

Více informací

RAM® clevis parts for transducer aluminium rod holder

RAM® clevis parts for transducer aluminium rod holder

The RAM-B-316-TRA1-NRU is the transducer kit used with the RAM TRA1 series transducer holders. This includes the RAP-202-TRA1U transducer base with .5 inch female thread flex rod. In addition, the kit contains the RAP-321U RAM octagon knob with male thread and .5 inch tube clevis and the RAP-B-200-1U single socket arm for a 1 inch ball with octagonal female opening. The RAP-321U and RAP-B-200-1U are normally used to attach on one side to a RAM aluminium rod of .5 inch diameter and on the other side to a RAM ball accessory of 1 inch diameter. The RAM transducer arm mount is compatible with most transducers attached with a 1/4" bolt/screw.

37,39 €*incl. VAT

30,90 €excl. VAT

Více informací

RAM® combination-lockable power + data dock for Samsung Tab Active5 and 3

RAM® combination-lockable power + data dock for Samsung Tab Active5 and 3

This combination-lockable RAM® EZ-Roll'r™ powered holder for the Samsung Tab Active5, Tab Active3 and 2 is designed to meet the demands of field workers across a wide range of applications such as transport, field sales, logistics, manufacturing and much more. Power and data sync capabilities are supplied to the device via GDS® pogo pins, while you use this holder's USB-A port for an additional peripheral, making this the ideal, compact mounting solution for your mobile workstation. Access to the stylus is maintained while the device is docked. Included is a set of four nuts and bolts to attach the holder to any RAM® B- or C-size components with the universal 4-hole AMPS pattern. This holder also includes space on the back for a GDS® Hand-Stand™ attachment so you can easily take your Tab Active5, 3 or 2 from your vehicle to your person to your desk without hassle.

209,58 €*incl. VAT

173,21 €excl. VAT

Více informací

RAM® combination-lockable power + data dock for Tab Active5 Pro and 4 Pro

RAM® combination-lockable power + data dock for Tab Active5 Pro and 4 Pro

This powered holder for the Samsung Galaxy Tab Active5 Pro and 4 Pro is designed to meet the demands of field workers across a wide range of applications such as transport, field sales, logistics, manufacturing and much more. Power and data sync capabilities are supplied to the device via pogo pins, and you can easily rotate the device for use in portrait or landscape orientation. For security and theft deterrence, this powered holder features a combination lock that is compatible with the device's RAM® Skin™ or factory skin, as well as the GDS® Hand-Stand™ and shoulder strap accessories. Access to the stylus is maintained while the device is docked. Included is a set of four nuts and bolts to attach the holder to any RAM® components with the universal AMPS hole pattern. Also included are the USB Type-A female pigtail, cable clamp and cable ties.

209,08 €*incl. VAT

172,79 €excl. VAT

Více informací

RAM® combination-lockable USB-C dock for Tab Active5 Pro & 4 Pro

RAM® combination-lockable USB-C dock for Tab Active5 Pro & 4 Pro

This powered holder for the Samsung Galaxy Tab Active5 Pro, Tab Active4 Pro and Tab Active Pro is designed to meet the demands of field workers across a wide range of applications such as transport, outside field sales, logistics, manufacturing and much more. Power capabilities are delivered to the device via pogo pins, and you can easily rotate the device for use in portrait or landscape mode. For security and theft prevention, this powered holder has a combination lock that is compatible with the RAM® Skin™ or the device's factory skin, as well as GDS® Hand-Stand™ and shoulder strap accessories. Access to the stylus is retained while the device is docked. Included is a set of four nuts and bolts to connect the holder to any RAM® component with the universal AMPS hole pattern.

191,76 €*incl. VAT

158,48 €excl. VAT

Více informací

RAM® combination-lockable USB-C powered dock for Samsung Tab Active5 & 3

RAM® combination-lockable USB-C powered dock for Samsung Tab Active5 & 3

This powered combination-lockable holder for the Samsung Tab Active5, Tab Active3 and 2 is designed to meet the demands of field workers across a wide range of applications such as transport, outside field sales, logistics, manufacturing and much more. Power capabilities are delivered to the device via pogo pins, and you can easily rotate the device for use in portrait or landscape mode. For security and theft prevention, this powered holder has a combination lock that is compatible with the RAM® Skin™ or the device's factory skin, as well as GDS® Hand-Stand™ and shoulder strap accessories. Access to the stylus is retained while the device is docked. Included is a set of four nuts and bolts to connect the holder to any RAM® component with the universal AMPS hole pattern.

188,78 €*incl. VAT

156,02 €excl. VAT

Více informací

RAM® Combo-Locking form-fit powered dock for Zebra TC53 & TC58

RAM® Combo-Locking form-fit powered dock for Zebra TC53 & TC58

The RAM® Combo-Locking form-fit powered dock for Zebra TC53 & TC58 (RAM-HOL-ZE17CL-2U) is a combo-locking, spring-loaded, form-fit dock that lets you secure and charge the Zebra TC53 and TC58, with or without the rugged Zebra boot. Features include an integrated stylus holder that clicks your stylus into place when not in use, as well as a standard 1.2m long DC female cable that provides charging capability. The speaker and microphone are fully accessible while the device is docked, and the dock accommodates the Zebra hand strap. The dock is compatible with RAM® diamond bases with two-hole AMPS pattern that connect to B- and C-size ball holders, enabling a wide range of mounting options (hardware included).

186,07 €*incl. VAT

153,78 €excl. VAT

Více informací

RAM® Combo-Locking form-fit powered dock for Zebra TC73 & TC78

RAM® Combo-Locking form-fit powered dock for Zebra TC73 & TC78

The RAM® Combo-Locking form-fit powered dock for Zebra TC73 & TC78 (RAM-HOL-ZE17L-1U) is a combo-locking, spring-loaded, form-fit powered dock that lets you secure the rugged Zebra TC73 and TC78 handheld PC. Power is delivered to the device via a 1.2m long female 5.5mm DC barrel connector. This dock includes an integrated stylus holder that clicks your stylus into place when not in use, and accommodates the Zebra hand strap. Complete your solution by adding a compatible RAM® diamond base with two-hole AMPS pattern and a B- or C-size ball holder, enabling a wide range of mounting options (hardware included).

185,34 €*incl. VAT

153,17 €excl. VAT

Více informací

RAM® composite ball adapter with AMPS plate

RAM® composite ball adapter with AMPS plate

The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes in each corner, forming the universal AMPS hole pattern of 1.5 x 1.188 (hole spacing).

12,22 €*incl. VAT

10,10 €excl. VAT

Více informací

RAM® composite ball adapter with round plate and 1/4"-20 threaded post

RAM® composite ball adapter with round plate and 1/4"-20 threaded post

The RAM camera base includes a 1" rubber ball connected to a round base with a diameter of 2.5". Also included is a 1/4"-20 steel threaded post; centred, the round base provides support and stability for cameras resting on top. The 1/4"-20 steel male threaded post fits any standard female thread found on camcorders and digital cameras.

17,74 €*incl. VAT

14,66 €excl. VAT

Více informací

RAM® composite ball base for 1" rails

RAM® composite ball base for 1" rails

Compact, high-strength composite base that mounts securely to rails, tubes and rods with a diameter of 1". Fitted with a B-size 1" rubber ball, it forms the foundation of countless mounting solutions for vehicles, equipment and recreational gear. Its lightweight construction, vibration-dampening rubber ball and easy installation make it an ideal choice for anyone needing a reliable and cost-effective mounting point for electronic devices, cameras and more.

14,18 €*incl. VAT

11,72 €excl. VAT

Více informací

RAM® composite ball base with 1.5" x 2" 4-hole pattern

RAM® composite ball base with 1.5" x 2" 4-hole pattern

The RAP-B-202U-225 contains a 1" diameter rubber ball connected to a high-strength composite rectangular plate with a 1.5" x 2" 4-hole pattern, centre-to-centre.

13,46 €*incl. VAT

11,12 €excl. VAT

Více informací

RAM® composite diamond ball base

RAM® composite diamond ball base

The RAP-B-238U ball base consists of a 1" B-size rubber ball connected to a diamond plate of 2.43" x 1.31". The diamond plate features two holes measuring 1.912" centre to centre, matching the AMPS hole pattern that is the industry standard. This diamond ball base is compatible with a wide range of RAM® device cradles and holders.

12,22 €*incl. VAT

10,10 €excl. VAT

Více informací

RAM® composite diamond ball base with hardware

RAM® composite diamond ball base with hardware

The RAM® composite diamond ball base with hardware (art. RAP-B-238-SKY1U) is an original RAM Mounts mounting part for securely and vibration-free attaching devices.The ball adapter adds a RAM® ball to a base or device, so it can be incorporated into the RAM® ball-and-socket system. This lets you flexibly and vibration-free connect a variety of parts together.Ball/plate adapter for the RAM® ball-and-socket systemFor flexible connection of base and holderOriginal RAM Mounts part.

17,39 €*incl. VAT

14,37 €excl. VAT

Více informací

RAM® composite diamond ball base with mounting plate

RAM® composite diamond ball base with mounting plate

The RAP-B-238-BU consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes at 1.912" centre-to-centre, which diagonally match the industry-standard 4-hole AMPS hole pattern. This base includes a high-strength composite mounting plate, connected with stainless steel screws and nuts to reinforce any flat surface against which the ball is mounted.

19,03 €*incl. VAT

15,73 €excl. VAT

Více informací

RAM® composite diamond plate with Octagon Button

RAM® composite diamond plate with Octagon Button

The high-strength plastic universal plate has a 1.0" diameter round male button on an Octagon neck, connected at a right angle to a 1 1/4" x 2 1/2" diamond plate. The plate has two holes at 1.912" centre-to-centre, at both ends of the diamond plate. NOTE: this base plate fits any of the RAM plastic HOL holders and the industry-standard AMPS hole pattern.

6,79 €*incl. VAT

5,61 €excl. VAT

Více informací

RAM® composite double Octagon Button

RAM® composite double Octagon Button

The coupler serves to combine 2 RAP-B-200-1U and/or RAP-200-1U into a double socket arm with the ability to rotate 360° in the middle of the arm. This also gives the option to have a B size 1" ball socket on one side and a C size 1.5" ball socket on the other side. This is intended for light applications.

5,97 €*incl. VAT

4,93 €excl. VAT

Více informací

RAM® composite double socket arm - B size medium

RAM® composite double socket arm - B size medium

The RAP-B-201U, composite standard double socket arm, has a socket at both ends suitable for 1" ball bases. A single spring in the arm opens the end sockets, allowing you to tilt the ball and socket connection. This socket technology provides virtually infinite adjustability and perfect viewing angles.

20,29 €*incl. VAT

16,77 €excl. VAT

Více informací

RAM® composite double socket arm - B size short

RAM® composite double socket arm - B size short

The RAP-B-201U-A consists of a short double socket arm suitable for ball bases, device holders and adapters in 1" B size. With an overall length of 2.42", this is the lowest-profile RAM® double socket arm. With the easy-to-adjust knob you can adjust your connected device virtually infinitely.

16,92 €*incl. VAT

13,98 €excl. VAT

Více informací

RAM® composite double socket arm - C size medium

RAM® composite double socket arm - C size medium

The RAP-201U consists of a medium double socket arm suitable for 1.5" C size ball bases, device holders and adapters. This is the standard RAM® double socket arm size. The easy-to-adjust knob allows for virtually infinite adjustability for your connected device.

31,94 €*incl. VAT

26,40 €excl. VAT

Více informací