Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

GDS® dock with power for Zebra XSLATE L10

GDS® dock with power for Zebra XSLATE L10

Equipped with GDS® Technology™ for charging capabilities, the GDS® vehicle dock for the Zebra XSLATE L10 lets you keep the device charged via the pogo pin contacts when it is docked—power is supplied via the dock's 5.5mm DC power connector. The dock also allows the tablet's scan function to work through the cut-out on the back, which also accommodates tablet accessories such as a scanner, hand strap, stand and bracket for extended battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm to complete your mounting solution.

251,09 €*incl. VAT

207,51 €excl. VAT

Více informací

GDS® fan accessory for GDS® Tough-Dock™

GDS® fan accessory for GDS® Tough-Dock™

The GDS® fan accessory transforms the GDS® Tough-Dock™ into a GDS® Cool-Dock™ with a 12-VDC axial cooling fan, including a built-in 2.2-metre hard-wired cable with SAE quick connectors. With a speed of 8000 RPM and an airflow of 10 CFM, the GDS® fan accessory is specifically designed for the GDS® Tough-Dock™ and GDS® Cool-Dock™ vehicle docks and helps cool the tablet during normal use. Always Protected. Always Connected.®

58,65 €*incl. VAT

48,47 €excl. VAT

Více informací

GDS® form-fit holder for Zebra ET5x 10.1" series

GDS® form-fit holder for Zebra ET5x 10.1" series

The GDS® vehicle dock has a custom-made design specifically for the Zebra ET5x 10.1" series tablets, with cut-outs that leave all buttons and ports accessible. The dock also allows the tablet's scan function to work through the cut-out on the back, which also accommodates tablet accessories such as a scanner, rotating hand strap and PowerPack battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm to complete your mounting solution. Go one step further by using the built-in 2-hole mounting plate that is compatible with the RAM® 2-hole diamond base for mounting an additional device, such as a phone or other handheld device. An included optional accessory bracket lets you attach RAM® 2-hole diamond bases for device mounting and features a cable management system.

120,29 €*incl. VAT

99,41 €excl. VAT

Více informací

GDS® form-fit holder for Zebra ET5x 8.3" & 8.4" series

GDS® form-fit holder for Zebra ET5x 8.3" & 8.4" series

The GDS® vehicle dock has a custom-made design specifically for the Zebra ET5x 8.3" & 8.4" series tablets, with cut-outs that leave all buttons and ports accessible. The dock also allows the tablet's scan function to work through the cut-out on the back, which also accommodates tablet accessories such as a scanner, rotating hand strap and PowerPack battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm to complete your mounting solution. Go one step further by using the built-in 2-hole mounting plate that is compatible with the RAM® 2-hole diamond base for mounting an additional device, such as a phone or other handheld device. An included optional accessory bracket lets you attach RAM® 2-hole diamond bases for device mounting and features a cable management system.

108,68 €*incl. VAT

89,82 €excl. VAT

Více informací

GDS® form-fit holder for Zebra XSLATE L10

GDS® form-fit holder for Zebra XSLATE L10

The GDS® vehicle dock has a custom-made design specifically for the Zebra XSLATE L10, with cut-outs that leave all buttons and ports accessible. The dock also allows the tablet's scan function to work through the cut-out on the back, which also accommodates tablet accessories such as a scanner, hand strap, stand and bracket for extended battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm to complete your mounting solution.

123,41 €*incl. VAT

101,99 €excl. VAT

Více informací

GDS® form-fit holder with combination lock for Zebra ET5x 10.1" series

GDS® form-fit holder with combination lock for Zebra ET5x 10.1" series

The GDS® vehicle dock has a form-fit design with combination lock made specifically for the Zebra ET5x 10.1" series tablets, including cut-outs that leave all buttons and ports clear. The dock also allows the tablet's scan function to work through the recess at the back, which also accommodates tablet accessories such as a scanner, rotating hand strap and PowerPack battery. This vehicle dock is compatible with RAM® bases with 4-hole AMPS and 75mm x 75mm VESA pattern in C and D size for attaching a double socket arm to complete your mounting solution. Take it a step further by using the built-in two-hole mounting plate compatible with the RAM® two-hole diamond base for additional device mounting such as a phone or other handheld device. An included optional accessory bracket allows RAM® two-hole diamond bases to be connected for device mounting and features a cable management system.

149,11 €*incl. VAT

123,23 €excl. VAT

Více informací

GDS® form-fit holder with combination lock for Zebra XSLATE L10

GDS® form-fit holder with combination lock for Zebra XSLATE L10

The GDS® vehicle dock has a custom-made design with combination lock specifically for the Zebra XSLATE L10, with cut-outs that leave all buttons and ports accessible. The dock also allows the tablet's scan function to work through the cut-out on the back, which also accommodates tablet accessories such as a scanner, hand strap, stand and bracket for extended battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm to complete your mounting solution.

162,67 €*incl. VAT

134,44 €excl. VAT

Více informací

GDS® form-fit holder with key lock for Zebra ET5x 10.1" series

GDS® form-fit holder with key lock for Zebra ET5x 10.1" series

The GDS® vehicle dock has a custom-made design with key lock specifically for the Zebra ET5x 10.1" series tablets, with cut-outs that leave all buttons and ports accessible. The dock also allows the tablet's scan function to work through the cut-out on the back, which also accommodates tablet accessories such as a scanner, rotating hand strap and PowerPack battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm to complete your mounting solution. Go one step further by using the built-in 2-hole mounting plate that is compatible with the RAM® 2-hole diamond base for mounting an additional device, such as a phone or other handheld device. An included optional accessory bracket lets you attach RAM® 2-hole diamond bases for device mounting and features a cable management system.

165,47 €*incl. VAT

136,75 €excl. VAT

Více informací

GDS® form-fit holder with key lock for Zebra ET5x 8.3" & 8.4" series

GDS® form-fit holder with key lock for Zebra ET5x 8.3" & 8.4" series

The GDS® vehicle dock has a custom-made design with key lock specifically for the Zebra ET5x 8.3" & 8.4" series tablets, with cut-outs that leave all buttons and ports clear. The dock also lets the tablet's scan function work through the recess at the back, which also accommodates tablet accessories such as scanner, rotating hand strap and PowerPack battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases to attach a double socket arm and complete your mounting solution. Take it a step further by using the built-in 2-hole mounting plate compatible with the RAM® 2-hole diamond base for mounting an additional device, such as a phone or other handheld device. An included optional accessory bracket lets you connect RAM® 2-hole diamond bases for device mounting and features a cable management system.

162,07 €*incl. VAT

133,94 €excl. VAT

Více informací

GDS® form-fit holder with key lock for Zebra XSLATE L10

GDS® form-fit holder with key lock for Zebra XSLATE L10

The GDS® vehicle dock has a custom-made design with key lock specifically for the Zebra XSLATE L10, with cut-outs that leave all buttons and ports accessible. The dock also allows the tablet's scan function to work through the cut-out on the back, which also accommodates tablet accessories such as a scanner, hand strap, stand and bracket for extended battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm to complete your mounting solution.

174,35 €*incl. VAT

144,09 €excl. VAT

Více informací

GDS® hand strap accessory for tablets with IntelliSkin®

GDS® hand strap accessory for tablets with IntelliSkin®

The GDS® hand strap is an excellent accessory to make your tablet suitable for field service use. This hand strap fits any IntelliSkin® with the unique round interface on the back. The hand strap is specifically designed for the business customer, but is equally an ideal solution for consumers. The unique design is comfortable, accommodates a gloved hand and can be rotated 360 degrees to find the ideal viewing angle. Always Protected. Always Connected.®

27,35 €*incl. VAT

22,60 €excl. VAT

Více informací

GDS® hand strap accessory for Zebra ET401 & ET4x 10” enterprise tablet

GDS® hand strap accessory for Zebra ET401 & ET4x 10” enterprise tablet

The GDS® hand strap for Zebra ET4x and ET401 10” enterprise tablet (RAM-GDS-HS2-ZE21U) is an expansion accessory that replaces the tablet's battery cover to enable the included ergonomic GDS® hand strap accessory. This expansion accessory works with the Zebra ET4x 10" with or without the Rugged Boot, or an IntelliSkin® protective case using the existing hardware. This ergonomic accessory for the Zebra ET4x and ET401 10" uses the attached hand strap for a comfortable grip on the tablet while you are on the go. Always Protected. Always Connected.®

60,69 €*incl. VAT

50,16 €excl. VAT

Více informací

GDS® hand strap for GDS® Tab-Conn™

GDS® hand strap for GDS® Tab-Conn™

The GDS® hand strap for GDS® Tab-Conn™ (RAM-GDS-TC-HS3U) provides drop protection for mobile workers who use their tablets on the go. To install, press the two ends of the hand strap into the notches of the GDS® Tab-Conn™ until you hear a satisfying "click". The GDS® hand strap has a lifetime warranty. Always Protected. Always Connected.®

15,00 €*incl. VAT

12,40 €excl. VAT

Více informací

GDS® hand strap for IntelliSkin® Thin-Case™ - large tablets

GDS® hand strap for IntelliSkin® Thin-Case™ - large tablets

The GDS® hand strap for tablets with IntelliSkin® Thin-Case™ - large tablets (RAM-GDS-TC-HS2U) provides drop protection for mobile workers who use their large tablets on the go. To install, press the two ends of the hand strap into the notches of the IntelliSkin® Thin-Case™ until you hear a satisfying "click". The GDS® hand strap has a lifetime warranty. Always Protected. Always Connected.®

14,48 €*incl. VAT

11,97 €excl. VAT

Více informací

GDS® Hand Strap for IntelliSkin® Thin-Case™ - Medium and Small Tablets

GDS® Hand Strap for IntelliSkin® Thin-Case™ - Medium and Small Tablets

The GDS® hand strap for tablets with IntelliSkin® Thin-Case™ (RAM-GDS-TC-HS1U) provides drop protection for mobile workers who use their tablets on the go. To install, press the two ends of the hand strap into the notches of the IntelliSkin® Thin-Case™ until you hear a satisfying "click". The GDS® hand strap has a lifetime warranty. Always Protected. Always Connected.®

14,22 €*incl. VAT

11,75 €excl. VAT

Více informací

GDS® hand strap for phones with IntelliSkin® or RAM® Skin™

GDS® hand strap for phones with IntelliSkin® or RAM® Skin™

The GDS® hand strap for phones with IntelliSkin® or RAM® Skin™ (RAM-HS4U) is specially designed for the business customer and is at the same time an ideal solution for consumers. This accessory supports any IntelliSkin® or RAM® Skin™ with the built-in belt clip insert, including the Samsung XCover6 Pro and the Apple iPhone 15 series. The unique design provides a comfortable grip and adds extra security to prevent drops and make your phone suitable for field use. The GDS® hand strap is covered by a lifetime warranty. Always Protected. Always Connected.®

27,14 €*incl. VAT

22,43 €excl. VAT

Více informací

GDS® Hand-Stand™ for IntelliSkin® with Uni-Conn™ adapter

GDS® Hand-Stand™ for IntelliSkin® with Uni-Conn™ adapter

The RAM® Mounts Hand-Stand™ features innovative all-in-one hand strap and stand functionality for any IntelliSkin® with the Uni-Conn™ adapter on the back. Designed for business use, the RAM® Hand-Stand™ is built with the professional user in mind – including field service, warehouse logistics, public safety and commercial fleets. Also compatible with the OtterBox uniVERSE adapter.

35,84 €*incl. VAT

29,62 €excl. VAT

Více informací

GDS® Hand-Stand™ for Panasonic FZ-A3

GDS® Hand-Stand™ for Panasonic FZ-A3

Specifically designed for the Panasonic FZ-A3, the GDS® Hand-Stand™ for Panasonic FZ-A3 is a two-in-one hand strap and stand. The unique design integrates a comfortable hand strap that fits a gloved hand and can be rotated 360 degrees to find the ideal viewing and operating angle of your tablet, whether that is in portrait, landscape or somewhere in between. An integrated stand allows the tablet to be placed on a flat surface for stationary use of your tablet. The GDS® Hand-Stand™ is covered by a lifetime warranty. Always Protected. Always Connected.®

84,24 €*incl. VAT

69,62 €excl. VAT

Více informací

GDS® Hand-Stand™ for Zebra ET401 & ET4x 10” enterprise tablet

GDS® Hand-Stand™ for Zebra ET401 & ET4x 10” enterprise tablet

The GDS® Hand-Stand™ hand strap and stand for Zebra ET4x and ET401 10” enterprise tablet (RAM-GDS-HS1-ZE21U) is an expansion accessory that replaces the tablet's battery cover to enable the included ergonomic GDS® Hand-Stand™ stand and hand strap accessory. This expansion accessory works with the Zebra ET4x 10" with or without the Rugged Boot, or an IntelliSkin® protective case using the existing hardware. This ergonomic accessory for the Zebra ET4x and ET401 10" is perfect for an on-the-go desktop experience, with the hand strap for a comfortable grip on the tablet and a foldable stand that rotates 360 degrees to the desired position. Always Protected. Always Connected.®

72,41 €*incl. VAT

59,84 €excl. VAT

Více informací

GDS® Hand-Stand™ magnetic accessory for Zebra ET401 & ET4x 10” tablet

GDS® Hand-Stand™ magnetic accessory for Zebra ET401 & ET4x 10” tablet

The GDS® Hand-Stand™ magnetic hand strap and stand for Zebra ET4x and ET401 10” enterprise tablet (RAM-GDS-HS1M-ZE21U) is an expansion accessory that replaces the tablet's battery cover to enable the included ergonomic GDS® Hand-Stand™ stand and magnetic hand strap accessory. This expansion accessory works with the Zebra ET4x 10" with or without the Rugged Boot, or an IntelliSkin® protective case using the existing hardware. This ergonomic accessory for the Zebra ET4x and ET401 10" is perfect for an on-the-go desktop experience, with the hand strap for a comfortable grip on the tablet and a foldable stand that rotates 360 degrees to the desired position. This version of the GDS® Hand-Stand™ includes a magnetic hand strap for mounting on metal surfaces when you need your hands free. Always Protected. Always Connected.®

115,63 €*incl. VAT

95,56 €excl. VAT

Více informací

GDS® Hand-Stand™ magnetic hand strap and stand for tablets

GDS® Hand-Stand™ magnetic hand strap and stand for tablets

The magnetic version of the GDS® Hand-Stand™ tablet hand strap and stand is a perfect accessory to make your tablet suitable for field service use, and is compatible with any IntelliSkin® case using the unique round interface as an attachment point. With the magnetic strap you easily secure your device to various metal surfaces. The GDS® Hand-Stand™ is specifically designed for the business customer, but is equally an ideal solution for consumers. The unique design incorporates a comfortable hand strap that accommodates a gloved hand and can be rotated 360 degrees for an ideal viewing angle. In addition, an integrated stand makes it possible to place the tablet on a flat surface for use on the go. Always Protected. Always Connected.®

78,32 €*incl. VAT

64,73 €excl. VAT

Více informací

GDS® Hand-Stand™ with OtterBox uniVERSE tablet case adapter

GDS® Hand-Stand™ with OtterBox uniVERSE tablet case adapter

The GDS® Hand-Stand™ features innovative all-in-one hand strap and stand functionality for the OtterBox uniVERSE case (any Apple or Samsung tablet). Designed for business use, the RAM® Hand-Stand™ is built with the professional user in mind – including field service, warehouse logistics, public safety and commercial fleets. Includes the RAM® adapter for OtterBox uniVERSE cases (RAM-HOL-OT3BU) for an all-in-one solution.

51,76 €*incl. VAT

42,78 €excl. VAT

Více informací

GDS® Hand-Stand™ with risers for vehicle docks

GDS® Hand-Stand™ with risers for vehicle docks

Always Protected. Always Connected.®

50,81 €*incl. VAT

41,99 €excl. VAT

Více informací

GDS® handheld dock with USB Type-C 2.0 for IntelliSkin® products

GDS® handheld dock with USB Type-C 2.0 for IntelliSkin® products

This GDS® vehicle dock with USB Type-C is designed for all compatible handheld devices clad in IntelliSkin®, including the Apple iPhone 15 & 16 series, Zebra EC50/EC55, XCover7 Pro, XCover6 Pro and XCover Pro. The dock's one-handed operation makes it easier than ever to secure your IntelliSkin®-clad device across a wide range of environments and mounting configurations. This dock also provides room behind the device to support the GDS® hand strap while mounted. An integrated cut-out on the top provides access to buttons, ports and scanner without removing the device from the dock. With a 15" long USB Type-C cable, this dock supports USB 2.0 charging specifications and data transfer. Always Protected. Always Connected.®

119,49 €*incl. VAT

98,75 €excl. VAT

Více informací