Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® locking powered dock for Zebra TC8300

RAM® locking powered dock for Zebra TC8300

This locking powered spring-loaded dock (RAM-HOL-ZE26PLU) features a form-fit design specific to the Zebra TC8300. Charging is delivered via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. Thoughtfully designed for easy, one-handed placement of the device. Complete the solution by building your mount — these docks are RAM® Compatible™ and equipped with a 2-hole AMPS pattern for adding a diamond ball adapter. Make use of thousands of RAM® mounting components to build the perfect TC8300 solution.

351,89 €*incl. VAT

290,82 €excl. VAT

Více informací

RAM® locking powered dock for Zebra TC8300 - heated pins

RAM® locking powered dock for Zebra TC8300 - heated pins

This locking powered spring-loaded dock with heated pogo pins (RAM-HOL-ZE26PHLU) features a form-fit design specific to the Zebra TC8300. This dock has built-in heating elements that provide the necessary warmth to prevent the pogo pins from seizing, so they can operate in wet and freezing environments. Charging is delivered via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. Thoughtfully designed for easy, one-handed placement of the device. Complete the solution by building your mount — these docks are RAM® Compatible™ and equipped with a 2-hole AMPS pattern for adding a diamond ball adapter. Make use of thousands of RAM® mounting components to build the perfect TC8300 solution.

547,21 €*incl. VAT

452,24 €excl. VAT

Více informací

RAM® low-profile cage guard holder with mounting plate

The RAM® low-profile cage guard holder with mounting plate (RAP-403BPU) features two mounting plates, one riser and hardware to install securely on the cage guard of a forklift. Made of heavy duty steel, these mounting plates hold virtually any size tablet dock with a 4-hole AMPS pattern.

54,52 €*incl. VAT

45,06 €excl. VAT

Více informací

RAM® Low-Profile Power + Dual USB Dock for Tab Active5 & 3

The RAM® Thin-Dock™ Power + Data Dock for Samsung Tab Active5 & Tab Active3 (RAM-HOL-SAM58PD2TU) offers a slim profile with a depth of 2.28" and a metal reinforcement plate for a smaller footprint. The power capabilities of the dock are delivered to the device via pogo pin technology and an integrated mUSB cable, using the pogo pad docking contacts of the Tab Active5 & 3—simply place the device in the dock for a seamless charging experience. Add up to two peripherals with the built-in dual USB Type-A cord and connect a keyboard, barcode scanner, printer and more. This modular dock is compatible with the RAM® Skin™ or the factory skin of the device, along with most RAM® accessories including: RAM® Vent-Temp™, RAM® NFC Extender and side accessory attachments such as a phone holder or barcode scanner. Included is a set of four nuts and bolts to connect the dock to any RAM® component with the universal AMPS hole pattern. Also included are an mUSB to USB Type-A extension cord, cable clip and cable ties for cable management.

195,40 €*incl. VAT

161,49 €excl. VAT

Více informací

RAM® low-profile Tough-Claw™ small clamp mount

This RAM® Tough-Claw™ base (RAP-400-1U) clamps onto round, square and irregularly shaped rails and bars with an outer diameter of .625" to 1.14" and at the same time lets you easily attach a RAM® holder such as the Quick-Grip™ via the 2-hole diamond adapter.

59,44 €*incl. VAT

49,12 €excl. VAT

Více informací

RAM® M10-1.25 reverse-thread adapter

RAM® M10-1.25 reverse-thread adapter

The RAM® M10-1.25 reverse-thread adapter (RAM-M10125-RTA) raises the mirror mounting point on motorcycles by 20mm. The reverse-thread adapter is typically mounted on the rider's right mirror mounting point. This is done to ensure that when your mirror is struck while riding, the connected accessory unscrews instead of changing your vehicle's direction.

6,18 €*incl. VAT

5,11 €excl. VAT

Více informací

RAM® M10-1.25 thread extension - 20mm long

RAM® M10-1.25 thread extension - 20mm long

The RAM® M10-1.25 thread extension - 20mm long (RAM-M10125-TE) raises the mirror mounting point on motorcycles by 20mm. This adapter is compatible with the RAM® ball adapter with M10-1.25 threaded post (RAM-B-349U).

5,86 €*incl. VAT

4,84 €excl. VAT

Více informací

RAM® magnetic ball base

RAM® magnetic ball base

The RAM-B-202-339U consists of a 1" diameter rubber ball connected to a flat base of 2.5" diameter and a triple magnetic base adapter. The 2.5" diameter base features pre-drilled holes, including the universal AMPS hole pattern. The magnetic base adapter contains 3 rare-earth magnets that hold firmly to ferrous metals. Simply hold this product near the mounting surface and feel it almost jump out of your hand. The composite adapter that conceals the magnets is made of durable composite to prevent scratching the mounting surface. Ideally suited for many applications, you will undoubtedly find many ways to use your new magnetic holder at work, at home, on the go or at play.

49,37 €*incl. VAT

40,80 €excl. VAT

Více informací

RAM® Magnetic Replacement Strap for GDS® Hand-Stand™

RAM® Magnetic Replacement Strap for GDS® Hand-Stand™

This replacement strap is compatible with all GDS® Hand-Stand™ and hand-strap accessories for phones or tablets with IntelliSkin® or RAM® Skin™. The green part of the strap contains magnets that can attach your device to ferromagnetic surfaces. Strap components are considered general wear items and are not covered by the lifetime warranty. Always Protected. Always Connected.®

49,00 €*incl. VAT

40,50 €excl. VAT

Více informací

RAM® magnetic universal microphone clip adapter

RAM® magnetic universal microphone clip adapter

At RAM®, it's all about choice. Even with a simple design, we make sure to offer our customers different options, so that we certainly meet and exceed their expectations. Take a look at the new line of microphone clips for the RAM® Tough-Box™ console system. The RAM® microphone clip has a no-fail safety lock that holds the microphone firmly in place when it is not in use. This lock can also be easily removed for a quick-release function. This solution offers the ability to quickly adjust or remove the microphone clip and uses three strong magnets to attach the clip firmly to the console box. RAM® products are covered by the renowned NPI Lifetime Warranty.

30,47 €*incl. VAT

25,18 €excl. VAT

Více informací

RAM® male cigarette connector with 3 metre cable

RAM® male cigarette connector with 3 metre cable

This vehicle cigarette adapter is fitted with a male 5.5mm OD x 2.5mm ID barrel connector and is 3 metres long. With a 10-40VDC input and 5VDC output, this vehicle charger is ideal for powering the RAM® docks with power supply for the Zebra TC70, TC72, TC75 and TC77 on the go.

41,93 €*incl. VAT

34,65 €excl. VAT

Více informací

RAM® Mari-Nut™ rubber expansion hardware

RAM® Mari-Nut™ rubber expansion hardware

The RAM-MARI-NUT-4U consists of (4 pieces) brass nuts with rubber expansion function for blind-hole mounting.

12,61 €*incl. VAT

10,42 €excl. VAT

Více informací

RAM® Mari-Rivet™ aluminium pop rivets

RAM® Mari-Rivet™ aluminium pop rivets

The RAM-MARI-RIVET-4U consists of (4 pieces) aluminium 1/8" pop rivets for blind hole mounting.

7,55 €*incl. VAT

6,24 €excl. VAT

Více informací

RAM® MDT display mount

RAM® MDT display mount

Display mount for Mobile Data Terminal for RAM Tough-Box™ consoles.

252,65 €*incl. VAT

208,80 €excl. VAT

Více informací

RAM® MDT display mount with double swing arm and 8" upper post

RAM® MDT display mount with double swing arm and 8" upper post

Display mount for Mobile Data Terminal with double swing arm and 8" Tele-Pole™ for RAM Tough-Box™ consoles. With the double swing arm you can rotate and tilt the viewing angle of your keyboard when it is mounted on your console. Included is a rubber ball with a diameter of 1.5" connected to a flat base with a diameter of 2.5". This mount has pre-drilled holes, including the universal AMPS hole pattern, allowing it to fit most keyboards.

516,17 €*incl. VAT

426,59 €excl. VAT

Více informací

RAM® MDT display mount with long flange and 8" top pole

RAM® MDT display mount with long flange and 8" top pole

Display mount for Mobile Data Terminal with 8" top Tele-Pole™ with flange for RAM vehicle mounting systems and Tough-Box™ consoles. This mount with top Tele-Pole™ is compatible with all lower RAM Tele-Poles™ and vehicle mounting systems.

443,89 €*incl. VAT

366,85 €excl. VAT

Více informací

RAM® MDT display mount with long flange, ball mount & 8" upper pole

RAM® MDT display mount with long flange, ball mount & 8" upper pole

Display mount for Mobile Data Terminal with 8" upper Tele-Pole™ with flange and double socket arm mount for RAM vehicle mounting systems. The double socket arm mount features two round bases with a diameter of 2.5" with pre-drilled holes, including the universal AMPS hole pattern, allowing it to fit most keyboards. This mount is also compatible with all lower RAM Tele-Poles™ and vehicle mounting systems.

528,93 €*incl. VAT

437,13 €excl. VAT

Více informací

RAM® MDT display mount with long flange, swing arms & 8" upper pole

RAM® MDT display mount with long flange, swing arms & 8" upper pole

Display mount for Mobile Data Terminal with 8" upper Tele-Pole™ with flange and double swing arm for RAM vehicle mounting systems. The double swing arm lets you rotate and tilt the viewing angle of your keyboard when it is mounted on your console or vehicle system. Included is a rubber ball with a diameter of 1.5" connected to a flat base with a diameter of 2.5". This mount has pre-drilled holes, including the universal AMPS hole pattern, allowing it to fit most keyboards. This mount is also compatible with all lower RAM Tele-Poles™ and vehicle mounting systems.

555,12 €*incl. VAT

458,78 €excl. VAT

Více informací

RAM® MDT display mount with single swing arm and 8" upper pole

RAM® MDT display mount with single swing arm and 8" upper pole

Display mount for Mobile Data Terminal with single swing arm and 8" Tele-Pole™ for RAM Tough-Box™ consoles. The single swing arm lets you rotate and tilt the viewing angle of your keyboard when it is mounted on your console. Included is a rubber ball with a diameter of 1.5" connected to a flat base with a diameter of 2.5". This mount has pre-drilled holes, including the universal AMPS hole pattern, allowing it to fit most keyboards.

424,13 €*incl. VAT

350,52 €excl. VAT

Více informací

RAM® metal knob, bolt and spring hardware for C size socket arms

RAM® metal knob, bolt and spring hardware for C size socket arms

The RAM-2-1M provides all the replacement hardware needed to replace the standard knob on your C size arm with a metal knob with lock nut.

27,02 €*incl. VAT

22,33 €excl. VAT

Více informací

RAM® Microphone Clip with 90-Degree Bracket for RAM® Tough-Box™

RAM® Microphone Clip with 90-Degree Bracket for RAM® Tough-Box™

At RAM®, it's all about choice. Even with a simple design, we make sure to offer our customers various options, so that we certainly meet and exceed their expectations. Check out the new line of microphone clips for the RAM® Tough-Box™ console system. The RAM® microphone clip has a no-fail safety lock that holds the microphone firmly when it is not in use. This lock can also be easily removed for a quick-release function. RAM® products are covered by the renowned NPI Lifetime Warranty.

30,71 €*incl. VAT

25,38 €excl. VAT

Více informací

RAM® microphone with steel mounting clip

RAM® microphone with steel mounting clip

The RAM® microphone consists of a black button, steel mounting clip, 6' coiled cable and 3.5mm audio connector. This microphone is an ideal accessory to integrate with your radio or tablet in your truck for transport or field service applications.

113,92 €*incl. VAT

94,15 €excl. VAT

Více informací

RAM® Mirror-Mate™ ball base for Chrysler, Ford & Toyota

RAM® Mirror-Mate™ ball base for Chrysler, Ford & Toyota

The ideal mounting point for light electronics was hidden in plain sight all along. RAM now offers a mirror adapter with ball that not only looks fantastic but also performs beyond expectations. Simply remove your factory mirror, slide the RAM adapter over the factory button on the windscreen, and secure it. This great little product replicates the factory button on the cabin side so you can easily reattach your factory mirror. The form and function of the RAM mirror adapter are ideally suited for mounting GPS devices, reversing camera displays, radar detectors, mobile phones and so much more. There is no such thing as a mounting problem, only RAM solutions.

29,57 €*incl. VAT

24,44 €excl. VAT

Více informací

RAM® Mirror-Mate™ ball base for Dodge Sprinter Van

RAM® Mirror-Mate™ ball base for Dodge Sprinter Van

The ideal mounting point for lightweight electronics was obvious all along. RAM® now offers a mirror adapter with ball that not only looks fantastic but also performs beyond expectations. Simply remove your original mirror, slide the RAM® adapter over the original windscreen stud and secure it. This handy product replicates the original stud on the cabin side, so you can easily reattach your original mirror. The form and function of the RAM® mirror adapter are ideal for mounting GPS devices, reversing camera screens, radar detectors, phones and much more. A mounting problem does not exist, only RAM® solutions.

28,58 €*incl. VAT

23,62 €excl. VAT

Více informací