Tablethouders
158 products found
RAM® X-Grip® with RAM® Tough-Claw™ 9" rail mount for 7"-8" tablets
This bed mounting kit for 7”-8” tablets includes the large RAM® Tough-Claw™ clamp base, 9” extension pole, rotating double socket arm and the RAM® X-Grip® universal tablet holder. The RAM® Tough-Claw™ attaches with a turn of a knob to bed rails and bars with an outer diameter of 1” to 2.25”. Both a 9” long extension pole and the rotating double socket arm can easily be adjusted to keep the RAM® X-Grip® universal tablet holder in an ideal viewing and operating position. When not in use, the tablet holder and extension pole can easily be swung away from the bed.
372,66 €*incl. VAT
307,98 €excl. VAT
RAM® X-Grip® with RAM® Tough-Claw™ 9" tube mount for 9"-11" tablets
This bed mounting kit for 9”-10” tablets includes the large RAM® Tough-Claw™ clamp base, 9” extension pole, rotating double socket arm and the RAM® X-Grip® universal tablet holder. The RAM® Tough-Claw™ attaches with a turn of a knob to bed rails and bars with an outer diameter of 1” to 2.25”. Both a 9” long extension pole and the rotating double socket arm can be easily adjusted to keep the RAM® X-Grip® universal tablet holder in an ideal viewing and operating position. When not in use, the tablet holder and extension pole can easily be swung away from the bed.
462,07 €*incl. VAT
381,88 €excl. VAT
RAM® X-Grip® with RAM® Tough-Claw™ small clamp & RAM® Roto-View™
The RAM-B-400-C-UN9-ROTO1U consists of the Tough-Claw™ rail clamp base, a medium-length double socket arm and a universal spring-loaded X-Grip® holder for tablets. The spring-loaded X-Grip® holder folds out and in, for a perfect fit of your tablet. Included are easy-to-reach grip knobs for quickly inserting and removing your mobile device. The Tough-Claw™ rail clamp base is the ideal mounting base for quick and easy tool-free installation and removal on round, square and irregularly shaped rails and rods. The Tough-Claw™ can be clamped onto rails with an outer diameter of 0.625" - 1.14". Perfectly suited for mounting on an aircraft yoke, the handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ quickly becomes an indispensable RAM® part in your collection of mounting options. The RAM-B-400-C-UN9-ROTO1U features Roto-View technology allowing you to rotate your tablet up to 90 degrees for comfortable viewing in portrait or landscape mode. It is important to check the dimensions of your device including case/sleeve/skin when determining the overall size.
303,76 €*incl. VAT
251,04 €excl. VAT
RAM® X-Grip® with RAM® Twist-Lock™ pivot suction cup for 9"-11" tablets
The RAM-B-189-PIV1-UN9-KRU consists of a dual articulating 3.3" Twist-Lock suction cup base, double socket arm and universal X-Grip® holder for 9"-11" tablets. The dual articulating suction cup base is a stunning innovation in suction cup mounting. With the ability to articulate each suction cup independently, this mounting base can be used in various applications such as curved windows and surfaces. Included are extra easily accessible grip knobs on the back of the holder for quickly detaching your tablet. The X-Grip® holder is compatible with devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.
324,27 €*incl. VAT
267,99 €excl. VAT
RAM® X-Grip® with RAM® Twist-Lock™ suction cup holder for 7"-8" tablets
The RAM-B-166-UN8U consists of a RAM® Twist-Lock™ suction cup base of 3.3" diameter, medium-length double socket arm and the popular spring-loaded RAM® X-Grip® holder for 7"-8" tablets. The RAM® X-Grip® features an 'X' design that expands and contracts for a perfect fit of your device – even in a case. Included are easily accessible grip knobs on the back of the holder for quickly releasing your tablet. No matter which double socket arm and mounting base you combine the RAM® X-Grip® with, RAM® ball-and-socket technology allows virtually infinite adjustability to achieve the ideal viewing angle – while also extending the lifespan of your phone by absorbing shocks and vibrations. The RAM® X-Grip® tablet holder comes with a device tether that is recommended for added safety and peace of mind. This version of the RAM® X-Grip® holder is compatible with tablets that fit within the dimensions listed below. It is important to check the dimensions of the device including case, sleeve or skin when determining the overall size.
137,87 €*incl. VAT
113,94 €excl. VAT
RAM® X-Grip® with RAM® Twist-Lock™ suction cup mount for 9"-11" tablets
The RAM-B-166-UN9U consists of a 3.3" Twist-Lock suction cup base, double socket arm, round base adapter and universal X-Grip® cradle for 9"-11" tablets. The suction cup base is designed to grip strongly to glass and non-porous plastic surfaces. The holder is equipped with the patented RAM system with 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for near-infinite adjustability and perfect viewing angles. The X-Grip® cradle consists of a spring-loaded composite holder, extendable grip arms and an additional support cradle on the bottom. Included are extra easily accessible grip knobs on the back of the holder for quick release of your tablet. The X-Grip® cradle expands and contracts for a perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Check the dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.
235,85 €*incl. VAT
194,92 €excl. VAT
RAM® X-Grip® with RAM® Twist-Lock™ swivel suction cup for 12"-13" tablets
The RAM-B-189-PIV1-UN11U consists of a dual articulating 3.3" twist-lock suction cup base, double socket arm and universal X-Grip® holder for 12" tablets. The dual articulating suction cup base is a stunning innovation in the field of suction cup mounting. Because each suction cup can articulate independently, this mounting base can be used in a wide range of applications, such as curved windows and surfaces. Included are extra easy-to-reach grip knobs on the back of the holder for quickly releasing your tablet. The X-Grip® holder is compatible with devices that fit within the dimensions below. It is important to check the dimensions of your handheld device with case/sleeve/skin when determining the overall size.
320,61 €*incl. VAT
264,97 €excl. VAT
RAM® X-Grip® with Tough-Claw™ holder for 7"-8" tablets - B-size long
The RAM-B-400-C-UN8U consists of the Tough-Claw™ rail clamp base, a LONG double socket arm and a universal spring-loaded X-Grip® holder for 7"-8" tablets. The spring-loaded X-Grip® holder expands and contracts for a perfect fit of your tablet. Included are easily accessible grip knobs for quickly placing and removing your mobile device. The Tough-Claw™ rail clamp base is the ideal mounting base for quick and easy tool-free installation and removal on round, square and irregularly shaped rails and bars. The Tough-Claw™ can be clamped onto rails with an outer diameter of 0.625" - 1.14". Perfectly suited for mounting on an aircraft control column, the handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ quickly becomes an indispensable RAM® part in your collection of mounting options. The X-Grip® comes with a device tether cord, recommended for outdoor use. The holder is compatible with mobile devices that fit within the dimensions listed below. It is important to check the dimensions of your device including case/sleeve/skin when determining the overall size.
177,64 €*incl. VAT
146,81 €excl. VAT
RAM® X-Grip® with Tough-Claw™ mount for 7"-8" tablets - C-size short
The RAM® X-Grip® with RAM® Tough-Claw™ mount for 7"-8" tablets consists of a short C-size double socket arm, a small C-size RAM® Tough-Claw™ base for rails from .625" to 1.14" diameter and a universal X-Grip® clamp cradle for 7"-8" tablets. The mount is designed with a patented C-size RAM® rubber ball-and-socket system of 1.5" diameter with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles. The spring-loaded X-Grip® expands and contracts for a perfect custom fit to your 7"-8" tablet. Included are additional easy-access grip knobs on the back of the cradle for quick release of your tablet. The X-Grip® includes a device tether, recommended for open-cockpit vehicles such as a motorcycle or ATV/Side By Side. The cradle is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device with case/sleeve/skin when determining the overall size.
197,41 €*incl. VAT
163,15 €excl. VAT
RAM® X-Grip® with Twist-Lock™ dual suction cup for 9"-11" tablets – short
The RAM-B-189-A-UN9U consists of a dual 3.25" Twist-Lock suction cup base, short double socket arm, round base adapter and universal X-Grip® holder for 9"-11" tablets. The dual suction cup base is designed to grip extra strongly onto glass and non-porous plastic surfaces. The X-Grip® holder is compatible with devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.
258,30 €*incl. VAT
213,47 €excl. VAT
RAM® X-Grip® with Twist-Lock™ swivel suction cup for 9"-11" tablets - medium
The RAM-B-189-PIV1-UN9U consists of a dual articulating 3.3" twist-lock suction cup base, double socket arm and universal X-Grip® holder for 9"-11" tablets. The dual articulating suction cup base is a stunning innovation in the field of suction cup mounting. Because each suction cup can articulate independently, this mounting base can be used in a wide range of applications, such as curved windows and surfaces. The X-Grip® holder is compatible with devices that fit within the dimensions below. It is important to check the dimensions of your handheld device with case/sleeve/skin when determining the overall size.
304,51 €*incl. VAT
251,66 €excl. VAT
RAM® X-Grip® with Twist-Lock™ swivel suction cup for 9"-11" tablets - short
The RAM-B-189-PIV1-A-UN9U consists of a dual articulating 3.3" twist-lock suction cup base, short double socket arm and universal X-Grip® holder for 9"-11" tablets. The dual articulating suction cup base is a stunning innovation in the field of suction cup mounting. Because each suction cup can articulate independently, this mounting base can be used in a wide range of applications, such as curved windows and surfaces. Included are extra easy-to-reach grip knobs on the back of the holder for quickly releasing your tablet. The X-Grip® holder is compatible with devices that fit within the dimensions below. It is important to check the dimensions of your handheld device with case/sleeve/skin when determining the overall size.
301,70 €*incl. VAT
249,34 €excl. VAT
RAM® yoke clamp holder for iPad Pro 11" 1-4 Gen, Air 5 & 11" (M2, M3, M4)
The RAM® EZ-Roll’r™ holder for the iPad Pro 11", iPad Air 4, Air 5 & Air 11 (M2, M3, M4) secures your device in a custom-fit holder while the entire screen remains visible. Included is the RAM-B-121-202U, which consists of a yoke clamp base, a standard length double socket arm and a round 2.5" base with the universal AMPS hole pattern. Simply slide your iPad into the holder and roll the top clip over the device to secure it. The side buttons, camera and charging port remain conveniently exposed and accessible. This RAM® EZ-Roll’r™ holder also has three mounting points on the back to attach a RAM® round ball base. A mounting point on the side of the holder allows the Apple Pencil to be placed and removed. The yoke clamp base fits rails from 0.625" up to a maximum of 1.25" diameter. The 1" rubber ball sits at a right angle to the plane of the mount; when connected to a rail the ball is parallel to the rail. The mount is designed with a patented RAM 1" diameter rubber ball-and-socket system with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.
105,12 €*incl. VAT
86,88 €excl. VAT
RAM® yoke clamp mount for Apple iPad mini (A17 Pro) & mini 6
This ideal aircraft yoke mount is specifically designed for an Apple iPad mini (A17 Pro) & mini 6 and consists of a yoke clamp base, a medium-length B size double socket arm and a round 2.5" base with the universal AMPS hole pattern to attach the cradle. The yoke clamp base fits rails from 0.625" up to 1.25" in diameter. The 1" rubber ball sits perpendicular to the face of the mount; when attached to a rail the ball sits parallel to the rail. The mount is fitted with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.
103,82 €*incl. VAT
85,80 €excl. VAT