Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Universele houders

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

471 products found

RAM® ATV/Side By Side rail mount with 9mm angled bolt head adapter

RAM® ATV/Side By Side rail mount with 9mm angled bolt head adapter

The RAM-B-180-231Z-2NUBU consists of a steel strap base, U-bolt bases, double socket arm and 1" diameter ball base with 9mm hole. Designed for a clean installation, the RAM strap mount fits the most common roll bar sizes on Side By Sides, allowing placement of the RAM rubber ball base. This mount can also be attached to smaller-diameter handlebars on ATVs with the supplied hardware. The holder is equipped with the patented RAM system with 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for near-infinite adjustability and perfect viewing angles.

85,55 €*incl. VAT

70,70 €excl. VAT

Více informací

RAM® ball holder with round AMPS plate and large round plate - medium

RAM® ball holder with round AMPS plate and large round plate - medium

The RAM-D-101-254U consists of a 3.68" diameter round base, a STANDARD-length double socket arm and a 2.43" diameter round base. The 3.68" diameter round base has pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The 2.43" diameter round base contains the universal AMPS hole pattern. The holder incorporates a patented ball-and-socket system with a 2.25" diameter rubber ball, with adjustment points at both socket ends of the arm. The rubber ball-and-socket technology allows virtually infinite adjustment and perfect viewing angles.

245,03 €*incl. VAT

202,50 €excl. VAT

Více informací

RAM® ball holder with round AMPS plate and large round plate - short

RAM® ball holder with round AMPS plate and large round plate - short

The RAM-D-101-C-254U consists of a round base of 3.68" diameter, a SHORT double socket arm and a round base of 2.43" diameter. The 3.68" diameter round base has pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The 2.43" diameter round base features the universal AMPS hole pattern. The holder incorporates a patented ball-and-socket system with a 2.25" diameter rubber ball, with adjustment points at both socket ends of the arm. The rubber ball-and-socket technology allows virtually infinite adjustment and perfect viewing angles.

190,05 €*incl. VAT

157,07 €excl. VAT

Více informací

RAM® ball mount with 100x100mm VESA plate & plate for large electronics

RAM® ball mount with 100x100mm VESA plate & plate for large electronics

The RAM® ball mount with 100x100mm VESA plate & plate for large electronics (art. RAM-E-111U-D-246) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.The VESA plate provides a standardized bolt pattern to attach a monitor, screen or terminal to a RAM® ball or arm system.With standardized VESA bolt patternFor vehicles, forklifts and material handlingAlso known under reference: RAM-E-111U-D-246Original RAM® Mounts part.

475,22 €*incl. VAT

392,74 €excl. VAT

Více informací

RAM® Bi-Pod holder with double ball holder

RAM® Bi-Pod holder with double ball holder

The RAM® Bi-Pod holder with double ball holder (art. RAM-161-BU) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The component is part of the modular RAM® ball-and-socket system and holds equipment in place vibration-proof and adjustable.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-161-BUOriginal RAM® Mounts part.

377,35 €*incl. VAT

311,86 €excl. VAT

Více informací

RAM® Bi-Pod holder with single swing arm

RAM® Bi-Pod holder with single swing arm

The RAM® Bi-Pod holder with single swing arm (art. RAM-161-1U) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The socket arm connects two balls and lets you adjust the angle and position of the device steplessly; with the clamp knob you lock everything vibration-proof in place.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-161-1UOriginal RAM® Mounts part.

391,00 €*incl. VAT

323,14 €excl. VAT

Více informací

RAM® body holder for arms

RAM® body holder for arms

The RAM® body holder for arms (art. RAM-BM-A1) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The component is part of the modular RAM® ball-and-socket system and holds equipment vibration-proof and adjustable in place.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-BM-A1Original RAM® Mounts part.

32,23 €*incl. VAT

26,64 €excl. VAT

Více informací

RAM® body mount for legs

RAM® body mount for legs

The RAM® body mount for legs (art. RAM-BM-L1) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.The component is part of the modular RAM® ball-and-socket system and holds equipment securely in place, vibration-proof and adjustable.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-BM-L1Original RAM® Mounts part.

37,06 €*incl. VAT

30,63 €excl. VAT

Více informací

RAM® Bosch double ball mount with round plate

RAM® Bosch double ball mount with round plate

This kit has a 2.5 inch round base with a 1.5 inch rubber ball, a 3-inch double socket arm and a RAM base for Bosch rails.

114,43 €*incl. VAT

94,57 €excl. VAT

Více informací

RAM® brake/clutch reservoir mount for Garmin zumo 400-660 – medium

RAM® brake/clutch reservoir mount for Garmin zumo 400-660 – medium

With this motorcycle mount, attachment to handlebars, tubes or rails is a breeze. Easy to install and user-friendly, making the possibilities endless. The supplied galvanised metal U-bolt and nuts are designed to fit motorcycle handlebars or round rails with a diameter of 0.50" to 1.25". Thanks to the rubber ball and socket technology, virtually infinite adjustability and perfect viewing angles are possible. High-quality materials ensure that your GPS is safe, secure and within reach. RAM's patented design also absorbs shocks and vibrations, which helps extend the lifespan of your mobile device. This product can be mounted on both the brake/clutch reservoir and on any round rail with a diameter of 0.5" to 1.25". To check whether the base fits your motorcycle, compare the hole spacing of the base with your clutch/brake reservoir. The centre-to-centre spacing of the holes has a minimum width of 0.94" and a maximum of 1.58".

79,29 €*incl. VAT

65,53 €excl. VAT

Více informací

RAM® brake/clutch reservoir mount for Garmin zumo 400-660 – short

RAM® brake/clutch reservoir mount for Garmin zumo 400-660 – short

The RAM combination mount for handlebar and brake/clutch reservoir offers the ultimate flexibility for mounting on your motorcycle. Mount on both your handlebar and brake/clutch; virtually infinite adjustability and perfect viewing angles are provided in this set. RAM's patented design also absorbs shocks and vibrations, which helps extend the lifespan of your mobile device. This product can be mounted on both the brake/clutch reservoir and on any round rail with a diameter of 0.5" to 1.25". To check whether the base fits your motorcycle, compare the hole spacing of the base with your clutch/brake reservoir. The centre-to-centre spacing of the holes has a minimum width of 0.94" and a maximum of 1.58".

77,03 €*incl. VAT

63,66 €excl. VAT

Více informací

RAM® centred reservoir cover double ball mount

RAM® centred reservoir cover double ball mount

The RAM-B-182U consists of a centred brake/clutch reservoir cover base, double socket arm and diamond adapter base. The diamond adapter base has a hole pattern that matches the industry-standard AMPS hole pattern and fits a wide range of RAM Mount and third-party holders. Integrated into the holder is a patented system with a 1" diameter rubber ball and socket, with adjustment points at the base and the holder. With a turn of the arm knob you can move the reservoir cover holder to your optimal viewing position.

78,24 €*incl. VAT

64,66 €excl. VAT

Více informací

RAM® Cessna seat rail mount with 12" flex arm and diamond plate

RAM® Cessna seat rail mount with 12" flex arm and diamond plate

The RAM-B-131-238 consists of a Cessna-compatible seat rail base, a rigid 12" long post, a double socket arm and a diamond base adapter. The mount incorporates a patented rubber ball-and-socket system with a 1" diameter ball, with adjustment points at both ends of the socket arm; with a twist of the arm knob you move the mount to your optimal viewing position. The hole pattern on the diamond base adapter fits most RAM cradles.

283,47 €*incl. VAT

234,27 €excl. VAT

Více informací

RAM® Cessna seat rail mount with 12" flex arm and round plate

RAM® Cessna seat rail mount with 12" flex arm and round plate

The RAM® Cessna seat rail mount with 12" flex arm and round plate (art. RAM-B-131-202) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The base attaches to the seat rail and offers a sturdy anchoring point for building a RAM® ball-and-socket mount in the cockpit or cab.Flexible arm for free positioningFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-131-202Original RAM® Mounts part.

285,31 €*incl. VAT

235,79 €excl. VAT

Více informací

RAM® Cessna seat rail mount with AMPS hole pattern

RAM® Cessna seat rail mount with AMPS hole pattern

The RAM® Cessna seat rail mount with AMPS hole pattern (art. RAM-B-131) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The base attaches to the seat rail and provides a solid anchoring point for building a RAM® ball-and-socket mount in the cockpit or cabin.Modular RAM® Mounts mounting componentFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-131Original RAM® Mounts part.

284,48 €*incl. VAT

235,11 €excl. VAT

Více informací

RAM® chrome handlebar U-bolt mount with medium double socket arm

RAM® chrome handlebar U-bolt mount with medium double socket arm

The RAM-B-149CHU consists of a stainless steel U-bolt base, a CHROME double socket arm and a diamond adapter base. The diamond adapter base has a hole pattern that matches the industry-standard AMPS hole pattern and connects to a large number of RAM Mount and third-party holders. The mount is equipped with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

190,13 €*incl. VAT

157,13 €excl. VAT

Více informací

RAM® chrome handlebar U-bolt mount with short double socket arm

RAM® chrome handlebar U-bolt mount with short double socket arm

The RAM-B-149ACH-LO4 consists of a stainless steel U-bolt base, a SHORT CHROME double socket arm and a diamond adapter base. The diamond adapter base has a hole pattern that matches the industry-standard AMPS hole pattern and connects to a large number of RAM Mount and third-party holders. The mount is equipped with the patented RAM® rubber ball-and-socket system with a 1" diameter ball and adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

172,84 €*incl. VAT

142,84 €excl. VAT

Více informací

RAM® chrome motorcycle brake/clutch reservoir mount with diamond plate

RAM® chrome motorcycle brake/clutch reservoir mount with diamond plate

The RAM-B-174CHU consists of a 1" diameter chrome rubber ball, double socket arm and hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1". The brake/clutch reservoir hardware includes both standard and metric mounting bolts. Integrated in the holder is a patented system with 1" diameter rubber ball and socket, with adjustment points at both ends of the socket arm; with a twist of the arm knob you can move the holder to your optimal viewing position.

222,05 €*incl. VAT

183,51 €excl. VAT

Více informací

RAM® chrome motorcycle brake/clutch reservoir mount with round plate

RAM® chrome motorcycle brake/clutch reservoir mount with round plate

The RAM-B-174CH-202U consists of a 1" diameter chrome rubber ball, double socket arm, hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1" and a 2.5" diameter round base with the universal AMPS hole pattern. The brake/clutch reservoir hardware includes both standard and metric mounting bolts. Integrated in the holder is a patented system with 1" diameter rubber ball and socket, with adjustment points at both ends of the socket arm; with a twist of the arm knob you can move the holder to your optimal viewing position.

224,26 €*incl. VAT

185,34 €excl. VAT

Více informací

RAM® composite double ball 1" rail mount with high strength

RAM® composite double ball 1" rail mount with high strength

The RAM® high-strength composite rail mount consists of the 1" diameter ball-and-socket system with universal diamond base. The rail base is designed to sit at right angles to the mounting rail and is suitable for rails up to 1" diameter. Adjustment points at both socket ends provide virtually infinite adjustability and perfect viewing angles. High-quality materials keep your device safe, secure and within reach.

38,39 €*incl. VAT

31,73 €excl. VAT

Více informací

RAM® composite double ball mount with aluminium yoke clamp base

RAM® composite double ball mount with aluminium yoke clamp base

The RAM® composite double ball mount with aluminium yoke clamp base (art. RAP-B-102-121BU) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The yoke clamp mount clamps around a handlebar, tube or yoke and provides a sturdy base for a device via the RAM® ball-and-socket system. Ideal on a motorcycle, quad or boat where you want to mount on a tube.Clamp attachment around handlebar or tubePart of the RAM® ball-and-socket systemOriginal RAM Mounts part.

75,46 €*incl. VAT

62,36 €excl. VAT

Více informací

RAM® composite double ball mount with diamond & AMPS plates

RAM® composite double ball mount with diamond & AMPS plates

The RAP-B-238-A-347U consists of a 1" B-size ball on a diamond plate with short arm and square AMPS plate.

33,66 €*incl. VAT

27,82 €excl. VAT

Více informací

RAM® composite double ball mount with Diamond plates and mounting plate

RAM® composite double ball mount with Diamond plates and mounting plate

The RAM® composite double ball mount with Diamond plates and mounting plate (art. RAP-B-102-238BU) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The ball adapter adds a RAM® ball to a base or device so it can be integrated into the RAM® ball-and-socket system. This lets you connect a variety of components flexibly and vibration-free.Ball/plate adapter for the RAM® ball-and-socket systemFor flexible connection of base and holderOriginal RAM Mounts part.

44,33 €*incl. VAT

36,64 €excl. VAT

Více informací

RAM® composite double ball mount with rectangular AMPS plates - long

RAM® composite double ball mount with rectangular AMPS plates - long

The RAM® composite double ball mount with rectangular AMPS plates - long (art. RAP-B-141U-C) is an original RAM Mounts mounting component for securely and vibration-free attaching devices.The ball adapter adds a RAM® ball to a base or device so it can be integrated into the RAM® ball-and-socket system. This lets you flexibly and vibration-free connect various components together.Ball/plate adapter for the RAM® ball-and-socket systemFor flexible coupling of base and mountOriginal RAM Mounts part.

61,92 €*incl. VAT

51,17 €excl. VAT

Více informací