Nabíječka baterií

24V 48V 80V Posilovače Ostatní Kapkové & udržovací nabíječky Nabíjecí kabely & adaptéry

188 products found

Socket box SAE to DC2,5

Socket box - SAE to DC2.5Length: 30cm / 12?Suitable for use at very low temperatures down to -40 °C/-40 °F, cable remains flexible at temperatures down to “below freezing”.

20,89 €*incl. VAT

17,26 €excl. VAT

Více informací

Extension cable - 4.6m - 10A10 Amp extension cable for battery charging cable suitable for use at low temperature with weather- and dirt-resistant SAE connection system.Length=15 ft/460 cm2-pin SAE connector conforming to the industry standardMaximum cable current: 10 AmpSuitable for use at very low temperatures down to -40 °C/-40 °F, cable remains flexible at temperatures down to “below freezing”.Includes built-in rubber seal for heavy-duty OptiMATE SAE connector.High-quality cable designed by TecMate. 3-year limited warranty.

43,48 €*incl. VAT

35,93 €excl. VAT

Více informací

Charger USB SAE connection

Charge your phone, GPS system, camera or tablet directly via a standard SAE connector connected to the vehicle's 12V system.•Automatic shut-off at low voltage (< 12,4 V) prevents the vehicle battery from fully discharging.•Voltage range: between 12,4 V and 16 V direct current.•12V power via a 2-pin SAE connector conforming to the industry standard.•Actual output current of 5 V 1000 mA.•Protection against short circuit, overheating and overvoltage.•Built-in Apple 1A “handshake” power confirmation.•Included micro/mini USB adapters confirm charging status via cable to other smartphones/GPS systems.High-quality USB product designed by TecMate 3-year limited warranty.

25,02 €*incl. VAT

20,68 €excl. VAT

Více informací

Battery level indicator SAE std/wet cell

Battery level indicator - SAE - std/wet cell

17,77 €*incl. VAT

14,69 €excl. VAT

Více informací

OptiMate Lithium 4s 12,8V 10A

OptiMate Lithium 4S ampmatic, 12.8V- 9AHighly efficient diagnostic charger and tester for LiFePO4/LFP batteries. Perfect for charging a high-performance 12,8/13,2 V LiFePO4/LFP battery with a capacity of 2,5 to 120 Ah.Special features: The TUNE mode delivers stable power to reprogram a vehicle system, demonstrate a showroom model or to preserve the stored settings when the battery cables are disconnected to connect accessories or to replace the battery.BMS RECOVERY, activated with push button – for batteries with restart for protection against low voltage/complete discharge.SAVE mode with BMS recovery: starts from 0,5 V with continuous checking/testing of charge acceptance or bad/short-circuited cell condition. Unnecessary (and unsafe) charging of a bad battery is prevented.SafeTº: Automatic adjustment of the charging rate to the ambient temperature measured at the charger. Slower charging below freezing, no charging at temperatures below -20 °C / -4 °F (this can damage the lithium batteries).Ampmatic: the microprocessor matches the charging current for the ideal LiFePO4 charging curve to the size/condition of the battery, for the fastest and most complete way of charging.Specifications: CHARGING AMPS: 9,5 A (AmpMatic)USE: Indoor/outdoor (lowest temperature: -4 °F / -20 °C).RECOVERY: Starts from a low voltage of 0,5 V and 3-step RECOVERY and TEST at low voltage.IDEAL FOR: LiFePO4 (LFP) batteries with 4 cells between 2-120 Ah.INPUT: Universal (100-240 V 50-60 Hz), high efficiency (CEC-listed), fully sealed.STYLE: Weatherproof housing with wall mounts, a 5 ft/152 cm AC cable and a 6 ft/180 cm charging cable ending in an SAE connector.Weatherproof battery cable and standard set with battery clamps included.SAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shut-off in the event of a short circuit or when the battery is disconnected. 3-year limited replacement warranty.

283,88 €*incl. VAT

234,61 €excl. VAT

Více informací

Cable with battery clamps KET

Cable with battery clamps - KETLength : 6ft / 180cmTM/KET

24,12 €*incl. VAT

19,93 €excl. VAT

Více informací

Trickle charger OptiMate 3 12V 0,8A Silver

The most TRUSTED battery charger in racing! The OptiMate 3, the all-in-one tool for maintaining your 12V battery at home. Diagnosis, recovery, charging, tests and optimal maintenance are carried out automatically. This latest version of the OptiMate 3 offers all the user-friendly features of the more than two million OptiMates produced since 1995, but is now lighter and more efficient than ever. The OptiMate 3 desulfates batteries and then tests them after charging. The maintenance program delivers only what the battery needs, without ever overcharging or undercharging it.CHARGING CURRENT: 0,8 A (constant current)USE: Indoor/outdoor (lowest temperature: -4 °F/-20 °C).RECOVERY: Starts from a low voltage of 2 V and two-phase desulfation recovery.IDEAL FOR: 12 V STD, AGM and GEL batteries between 3 – 50 AhINPUT CURRENT: Universal (100-240 V 50-60 Hz), high efficiency (CEC-listed), fully sealed.DESIGN: Weatherproof housing with wall mounts, a 6 ft/180 cm AC cable and a 6 ft/180 cm charging cable ending in an SAE connector. Weatherproof battery cable and standard set with battery clamps included.SAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shut-off in the event of a short circuit or when the battery is disconnected. 3-year limited replacement warranty.

108,68 €*incl. VAT

89,82 €excl. VAT

Více informací

OptiMATE SOLAR controller 3.3A with 40W solar panel

OptiMate Solar DUO + 40W Solar Panel6-step 12V / 12.8V 3.33A sealed solar battery-saving charger & trickle chargerCHARGESaves flat batteries from as low as 4 volts thanks to its unique pulse action. Fastest way of charging – thanks to the ‘smart charge’ control that selects pulse charge or continuous charge according to the strength of the sunlight. Intelligent maintenance – continues the next day if the battery retained the charge overnight; if not, the program reverts to the OPTIMIZE step.MONITORBattery status is displayed every 3 seconds. Ready indication for STD and hi-performance AGM batteries and Lithium LFP batteries. Draws less than 0,5mA during monitor mode. Automatically switches to CHARGE when there is sufficient solar energy.MOUNTINGThe OptiMate charge controller is separate from the panel and can be placed close to the vehicle or the battery, so that the charging progress and the maintenance of the battery can be easily followed. The solar panel must be mounted so that it receives direct sunlight. The reach/distance between battery and panel is 315 cm/124?. Use the OptiMate extension cables O-03, O-13 or O-23 to connect the solar panel to the OptiMate charge controller over a longer distance.Outer dimension, including corner mounting brackets: Width = 42 cm / 16.6 ” Height = 68.6 cm / 27 ” Depth = 3.3 cm / 1 1/4 ” Solar panel:POWER : 40 Watts (max.)VOLTS : 12V / 12.8VUSE : Outdoor / indoor.STYLE : Weatherproof, aluminium frame with 4 mounting brackets, output cable 200 cm / 80? with SAE connector.OptiMate charge monitor:CHARGING AMPS : 3.33A from 40W panel (max. average current), 3-5A pulse currentUSE : Indoor / outdoor (lowest temperature: -4 °F / -20 °C).SAVE : starts from a low voltage of 4VIDEAL FOR : 12V STD, AGM and GEL batteries from 2 – 240 Ah and 12,8V/13,2V lithium LFP batteriesINPUT : 15 – 22VSTYLE : Weatherproof charge monitor housing.INCLUDED: Weatherproof battery cable, standard set of battery clamps & 40W solar panelSAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shut-off in the event of a short circuit or when the battery is disconnected.WARRANTY: 3-year limited replacement warranty.

411,32 €*incl. VAT

339,93 €excl. VAT

Více informací

Set of suction cups for OptiMATE Solar panels

Kit of suction cups for Optimate Solar panels

19,25 €*incl. VAT

15,91 €excl. VAT

Více informací

Extension cable 10A 762 cm

10 Amp battery charging cable extender with weather-/dirt-resistant SAE connection system.Long, black extender for cars and marine applications.Specifications:- Length: 762 cm- Connectors: SAE to SAE- Cable class: 16AWG (1,31mm²) SPT2-W- Use: -40°C/-40°F for use at low temperatures- Design: Includes in-line rubber seal for OptiMate heavy-duty SAE connector

58,00 €*incl. VAT

47,93 €excl. VAT

Více informací

Booster GIGALITHIUM 12V 800CA

The GIGA LITHIUM is a professional ultra-light and high performance booster. It is fitted with a LifePo4 battery with a microprocessing CPU controller. This protects the booster against: reverse polarity, short circuit, incorrect voltage, overcharging, over-discharging and overheating. Performance characteristics : • Voltage: 12 V • Cranking amps*: 800 CA • Start max amperage: 2000 A • Peak amps**: 4000 PA Technical characteristics : • Clamp output: 850 A • Cable length: 50 cm • Cable cross-section: 10 mm² • Maximum charging voltage: 14,5 V • Automatic battery charger: 12 V - 1,3 A • Battery type 4-cell Lithium LiFePO4 • Dimensions: 260 x 135 x 72 mm • Net weight: 2,5 kg Microprocessor functions : • Protection against reverse polarity • Protection against short circuit • Protection against overvoltage • Memory saver * Microprocessor electronically limited ** With internal battery

784,93 €*incl. VAT

648,70 €excl. VAT

Více informací

Trickle charger SPI1 6-12V 1A

The SPI1 battery charger has a maximum charging current of 1 amp. The charger works on 230V AC and charges 6V and 12V DC batteries. Thanks to the hook, the charger is easy to store during charging, so that the cables are not in the way. In addition, this trickle charger is fitted with a rubber housing to protect it even better against impact and drop damage.Specifications:• Voltage: 6V DC - 12V DC• Min. battery voltage: 0,5V• Max. charging current: 1A• Suitable for: AGM, GEL, CALCIUM, Start 'n Stop• Rubber housing• Microprocessor• Protection against reverse polarity• Thermal protection• Automatic shut-off• Hook• IP54

68,43 €*incl. VAT

56,55 €excl. VAT

Více informací

Welding electrodes rutile 3,2 mm x 350 mm 110-135 Amp (66 pieces)

Rutile welding electrodes:- Diameter: 3,2 mm- Length: 350 mm- Quantity: 66- Current: 110-135 A

18,01 €*incl. VAT

14,88 €excl. VAT

Více informací

Jump cable 1,2m 2x35mm² with double NATO 24V connector

with double NATO 24V plug & red auxiliary connector

522,24 €*incl. VAT

431,60 €excl. VAT

Více informací

Welding electrodes rutile 2 mm x 300 mm 40-60 Amp (40 pieces)

Rutile welding electrodes:- Diameter: 2,0 mm- Length: 300 mm- Quantity: 40- Current: 40-60 Amp

4,48 €*incl. VAT

3,70 €excl. VAT

Více informací

Welding electrodes rutile 2,5 mm x 300 mm 60-80 Amp (29 pieces)

Rutile welding electrodes:- Diameter: 2,5 mm- Length: 300 mm- Quantity: 29- Current: 60-80 Amp

5,51 €*incl. VAT

4,55 €excl. VAT

Více informací

Trickle charger SPI2 6-12V 2A

The SPI2 battery charger has a maximum charging current of 2 amperes. The charger runs on 230V AC and charges 6V and 12V DC batteries. Thanks to the hook, the charger is easy to store while charging, so the cables don't get in the way. In addition, this trickle charger has a rubber housing to protect it even better against impact and drop damage. Specifications: • Voltage: 6V DC - 12V DC • Min. battery voltage: 0,5V • Max. charging current: 2A • Suitable for: AGM, GEL, CALCIUM, Start 'n Stop • Rubber housing • Microprocessor • Protection against reverse polarity • Thermal protection • Automatic shut-off • Hook • IP54

88,09 €*incl. VAT

72,80 €excl. VAT

Více informací

Booster SOSBOOST trolley 12/24V 2000/1000CA

- Voltage: 12/24V- Cranking current (CA): 2000/1000- Maximum current (PA): 5920/2960- Cable length: 170 cm- Cable cross-section: 50 mm²- Automatic charger: 12 V - 4 A- Weight: 24,4 kg- Dimensions: 410 x 225 x 400 mm

2 103,10 €*incl. VAT

1 738,10 €excl. VAT

Více informací

Trickle charger SPI15 12V 15A showroom mode

The SPI15 battery charger has a maximum charging current of 15 amperes. The charger runs on 230V AC and charges 12V DC batteries. Thanks to the hook, the charger is easy to store while charging, so the cables don't get in the way. In addition, this trickle charger has a rubber housing to protect it even better against impact and drop damage. The charger is equipped with a showroom mode that provides a constant power supply. Specifications: • Voltage: 12V DC • Min. battery voltage: 0,5V • Max. charging current: 15A • Showroom mode • Suitable for: AGM, GEL, CALCIUM, Start 'n Stop • Rubber housing • Microprocessor • Protection against reverse polarity • Thermal protection • Automatic shut-off • Hook • IP20

188,76 €*incl. VAT

156,00 €excl. VAT

Více informací

Jump cable 4m 50mm² 2 auxiliary connectors

with auxiliairy red connector on both sidesUse this special cable to connect the Booster to vehicles and machines fitted with a vehicle auxiliary connector.

408,98 €*incl. VAT

338,00 €excl. VAT

Více informací

Trickle charger SPI6 12V 6A

The SPI6 battery charger has a maximum charging current of 6 amperes. The charger runs on 230V AC and charges 12V DC batteries. Thanks to the hook, the charger is easy to store while charging, so the cables don't get in the way. In addition, this trickle charger has a rubber housing to protect it better against impact and drop damage. Specifications: • Voltage: 12V DC • Min. battery voltage: 0,5V • Max. charging current: 6A• For batteries up to 130Ah• Suitable for: AGM, GEL, CALCIUM, Start 'n Stop • Rubber housing • Microprocessor • Protection against reverse polarity • Thermal protection • Automatic shut-off • Hook • IP20

134,49 €*incl. VAT

111,15 €excl. VAT

Více informací

Schumacher SL876U Magnetic Flex Work Light

Schumacher SL876U Magnetic Flex Worklight

64,49 €*incl. VAT

53,30 €excl. VAT

Více informací

Trickle charger SPI3 12V 3A LiFePO4

The SPI3 battery charger has a maximum charging current of 3 amperes. The charger runs on 230V AC and charges 12V DC batteries. Thanks to the hook, the charger is easy to store while charging, so the cables don't get in the way. In addition, this trickle charger has a rubber housing to protect it even better against impact and drop damage.Specifications:• Voltage: 12V DC• Max. charging current: 3A• Suitable for: AGM, GEL, CALCIUM, Start 'n Stop & Lithium LiFePO4• Rubber housing• Microprocessor• Protection against reverse polarity• Thermal protection• Automatic shut-off• Hook• IP54

110,11 €*incl. VAT

91,00 €excl. VAT

Více informací

Battery charger FLASHMEM 60 12V 60A 2,5m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 60 amperes. The charger is equipped with a microprocessor and has a 2,5m cable.Performance characteristics:• Voltage: 12V• Input voltage: 110-240V - 50-60Hz • Current: 60A• Input power: 1100W• Charging current: 5-60A• Charging capacity: 5-600Ah• Maintenance capacity: 5-1800AhTechnical characteristics:• Cable: 2,5m• Microprocessor• Application: reprogramming, flashing & diagnostics of cars• Selectable output voltage 14,8V• Protection against reverse polarity and short circuit• Protection against overload and voltage faults• Permanent and stable current• Robust clamps*Suitable for AGM, WET, Lithium LiFePO4

1 274,13 €*incl. VAT

1 053,00 €excl. VAT

Více informací

Kup si nabíječky baterií u JVD Parts

Tvoje průmyslová vozidla, jako jsou vysokozdvižné vozíky, retraky a nůžkové plošiny, potřebují pro efektivní provoz kvalitní baterie. Většina problémů u těchto strojů vzniká, když se baterie nabíjí nesprávně. Dokonalá kombinace se správnou nabíječkou zajistí, že ti baterie vydrží roky bez ztráty kapacity.

Nabíječky baterií najdeš u JVD Parts. Vyber si z naší široké nabídky ten správný produkt. Objednej do 13:00 a nabíječku dostaneš nejpozději do 3 pracovních dnů. Nenašel jsi, co hledáš? Kontaktuj náš tým. Rádi ti pomůžeme.

Objev nabíječku, která ti sedí

Nabíječky jsou nezbytné, i když baterii zrovna nepoužíváš. Tvoje baterie mají mírné samovybíjení, které z dlouhodobého hlediska vede k hlubokému vybití. Riskuješ tak nevratné poškození.

Konvenční nabíječka: často označovaná jako lineární nebo transformátorová nabíječka. Spolehlivá a levná. Jedinými nevýhodami jsou vyšší spotřeba energie a bzučení při nabíjení. Počítej s průměrnou dobou nabíjení 12 hodin.
Vysokofrekvenční nabíječka: zkracuje dobu nabíjení na 6 až 8 hodin. Tento typ je menší, lehčí a rychlejší, ale vyžaduje solidní investici.

Je důležité zvolit správnou nabíječku pro tvůj typ baterie. Mysli třeba na olověné baterie, gelové baterie, lithium-iontové baterie nebo baterie AGM. Vždy porovnej technické požadavky své baterie s nabíječkou, aby k sobě ideálně pasovaly. Ujisti se, že nabíjecí napětí nabíječky a baterie (ve voltech) je stejné. Dbej na to, aby nabíjecí proud nabíječky činil 20 % kapacity baterie (v ampérech). Mezi našimi značkami najdeš kvalitní deep-cycle baterie od výrobců Powerboozt, Trojan a Varta.

Jak používat nabíječku baterií

Pro optimální používání a dlouhou životnost baterie dbej na několik věcí:

Zajisti, aby kapacita tvé baterie nikdy neklesla pod 20 %.
Neodpojuj nabíječku od baterie příliš brzy.
Vyhni se zbytečnému průběžnému dobíjení, s výjimkou lithium-iontových baterií.

Doba nabíjení baterie závisí na typu baterie a typu nabíječky. Dobu nabíjení si snadno spočítáš sám tak, že kapacitu baterie vydělíš maximálním nabíjecím proudem. K tomu přičti ještě 2 až 4 hodiny na dobití z přibližně 80 % na 100 %.

Máš například baterii 200 Ah, která je vybitá napůl, a nabíječku 20 A? Pak je doba nabíjení 100/20 = 5 + 4 = 9 hodin. Přesto je nejlepší počítat s 12 hodinami na nabití baterie vysokozdvižného vozíku po celé osmihodinové směně.

Objednej si nabíječky baterií u JVD Parts

Už více než 60 let je JVD Parts tvým profesionálním partnerem pro díly a příslušenství pro průmyslová vozidla, jako jsou vysokozdvižné vozíky, nůžkové plošiny, zakladače a retraky. S nabíječkou z naší široké nabídky volíš kvalitní produkt.

Stále váháš? Pošli nám svůj dotaz. Rádi ti pomůžeme.

Kontaktujte nás

header.navigation.allCategories

Filtr

Filtr

Nabíječka baterií

Socket box SAE to DC2,5

Extension cable 4.6m 10A

Charger USB SAE connection

Battery level indicator SAE std/wet cell

OptiMate Lithium 4s 12,8V 10A

Cable with battery clamps KET

Trickle charger OptiMate 3 12V 0,8A Silver

OptiMATE SOLAR controller 3.3A with 40W solar panel

Set of suction cups for OptiMATE Solar panels

Extension cable 10A 762 cm

Booster GIGALITHIUM 12V 800CA

Trickle charger SPI1 6-12V 1A

Welding electrodes rutile 3,2 mm x 350 mm 110-135 Amp (66 pieces)

Jump cable 1,2m 2x35mm² with double NATO 24V connector

Welding electrodes rutile 2 mm x 300 mm 40-60 Amp (40 pieces)

Welding electrodes rutile 2,5 mm x 300 mm 60-80 Amp (29 pieces)

Trickle charger SPI2 6-12V 2A

Booster SOSBOOST trolley 12/24V 2000/1000CA

Trickle charger SPI15 12V 15A showroom mode

Jump cable 4m 50mm² 2 auxiliary connectors

Trickle charger SPI6 12V 6A

Schumacher SL876U Magnetic Flex Work Light

Trickle charger SPI3 12V 3A LiFePO4

Battery charger FLASHMEM 60 12V 60A 2,5m cable

Kup si nabíječky baterií u JVD Parts

Objev nabíječku, která ti sedí

Jak používat nabíječku baterií

Objednej si nabíječky baterií u JVD Parts