Nabíječka baterií

24V 48V 80V Posilovače Ostatní Kapkové & udržovací nabíječky Nabíjecí kabely & adaptéry

188 products found

Battery charger FLASHMEM 100 12V 100A 6m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 100 amperes. The charger is equipped with a microprocessor and has a 6m cable.Performance characteristics:• Voltage: 12V• Input voltage: 110-240V - 50-60Hz • Current: 100A• Input power: 1700W• Charging current: 10-100A• Charging capacity: 10-1000Ah• Maintenance capacity: 10-3000AhTechnical characteristics:• Cable: 6m• Microprocessor• Application: reprogramming, flashing & diagnosis of cars• Selectable output voltage 14.8V• Protection against reverse polarity and short circuit• Protection against overload and voltage faults• Permanent and stable current• Robust clamps*Suitable for AGM, WET, Lithium LiFePO4

2 060,63 €*incl. VAT

1 703,00 €excl. VAT

Více informací

Jump lead 3m 2x50mm² double 24V NATO plug

with double NATO 24V plug & grey auxiliary connector

893,46 €*incl. VAT

738,40 €excl. VAT

Více informací

Memory Saver Detector OBD-L

72,91 €*incl. VAT

60,26 €excl. VAT

Více informací

Battery charger FLASHMEM 120 12V 120A 6m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 120 amperes. The charger is equipped with a microprocessor and has a 6m cable.Performance characteristics:• Voltage: 12V• Input voltage: 110-240V - 50-60Hz • Current: 120A• Input power: 2100W• Charging current: 10-120A• Charging capacity: 10-1200Ah• Maintenance capacity: 10-3600AhTechnical characteristics:• Cable: 6m• Microprocessor• Application: reprogramming, flashing & diagnosis of cars• Selectable output voltage 14.8V• Protection against reverse polarity and short circuit• Protection against overload and voltage faults• Permanent and stable current• Robust clamps*Suitable for AGM, WET, Lithium LiFePO4

2 265,12 €*incl. VAT

1 872,00 €excl. VAT

Více informací

TITAN 60 multifunctional battery charger/starter 12V-24V 60A

TITAN+ is a complete and professional multifunctional instrument suitable for charging and starting all 12V and 24V electrical systems in vehicles, trucks, and small, medium and large vehicles. It is a powerful, reliable device controlled by a microprocessor and designed to carry out automatic charging cycles, specific to standard wet batteries and a new Gel/AGM battery of up to 10 charging and analysis phases. Thanks to the new ECS (Electronic Control System) technology, the TITAN + series combines excellent reliability with fast charging and maintenance at higher power.Specifications:- Voltage: 12 - 24V- Charging current: 1 - 40A (1 - 60A eff)- Starting current: 350PA, 250CA- Charging capacity: 4 - 450Ah- Weight: 18kg- 3 programmed charging cycles + 1 manual cycle- Electronic potentiometer for current adjustment- Electronic control system- Charging cycle in 10 phases- Removal of sulphate deposits + recovery- Constant analysis- Supply function- Integrated electronic protection- Ideal for Start&Stop + Spiral batteries- Compatible batteries: PB, WET, GEL, AGM, SPIRAL, MF, VRLA

1 030,32 €*incl. VAT

851,50 €excl. VAT

Více informací

Jump lead 2m 50mm² 24V MAN plug

with MAN 24V plug & red auxiliairy connector

556,84 €*incl. VAT

460,20 €excl. VAT

Více informací

Battery charger FLASHMEM 60 12V 60A 6m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 60 amperes. The charger is equipped with a microprocessor and has a 6m cable.Performance characteristics:• Voltage: 12V• Input voltage: 110-240V - 50-60Hz • Current: 60A• Input power: 1100W• Charging current: 5-60A• Charging capacity: 5-600Ah• Maintenance capacity: 5-1800AhTechnical characteristics:• Cable: 6m• Microprocessor• Application: reprogramming, flashing & diagnosis of cars• Selectable output voltage 14.8V• Protection against reverse polarity and short circuit• Protection against overload and voltage faults• Permanent and stable current• Robust clamps*Suitable for AGM, WET, Lithium LiFePO4

1 360,64 €*incl. VAT

1 124,50 €excl. VAT

Více informací

Battery charger FLASHMEM 120 12V 120A 2,5m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 120 amperes. The charger is equipped with a microprocessor and has a 2.5m cable. Performance characteristics: • Voltage: 12V • Input voltage: 110-240V - 50-60Hz • Current: 120A • Input power: 2100W • Charging current: 10-120A • Charging capacity: 10-1200Ah • Maintenance capacity: 10-3600Ah Technical characteristics: • Cable: 2.5m • Microprocessor • Application: reprogramming, flashing & diagnosis of cars • Selectable output voltage 14.8V • Protection against reverse polarity and short circuit • Protection against overload and voltage faults • Permanent and stable current • Robust clamps *Suitable for AGM, WET, Lithium LiFePO4

2 162,88 €*incl. VAT

1 787,50 €excl. VAT

Více informací

Battery 12V 1200A (CETEOR)

for SOS & PPS 12V/1200CA, 12V/24-2400/1200CA & 24V/1200CA

597,74 €*incl. VAT

494,00 €excl. VAT

Více informací

Welding helmet LV1820 4 sensors DIN 5-9/9-13 True color Wide screen

The design is the result of an ergonomics study, with particular attention to the internal space that makes our mask easy to use and comfortable to wear, fully protecting the face and neck. The material of the outer shell has a soft consistency and is highly resistant to both low and high temperatures, fireproof, corrosion resistant with high durability.- Viewing area: 100 mm x 59.5 mm- Cartridge size: 133 mm x 114 mm x 10 mm- Arc sensors: 4- Light shade: DIN 4- Dark shade: DIN 5-9/9-13- On/off: automatic on/off- UV/IR protection: DIN 16- Power supply: Solar cells + replaceable battery (CR2450)- Switching time: 1/10,000s.- Operating temperature: -5°C ~ +55°C- Protection rating: 1/1/1/1- Filter model: 40099- True colour: Yes

180,89 €*incl. VAT

149,50 €excl. VAT

Více informací

TITAN 100 multifunctional battery charger/starter 12V-24V 100A

TITAN+ is a complete and professional multifunctional instrument suitable for charging and starting all 12V and 24V electrical systems in vehicles, trucks, and small, medium and large vehicles. It is a powerful, reliable device controlled by a microprocessor and designed to carry out automatic charging cycles specific to standard wet batteries and a new Gel/AGM battery of up to 10 charging and analysis phases. Thanks to the new ECS (Electronic Control System) technology, the TITAN + series combines excellent reliability with fast charging and maintenance at higher power.Specifications:- Voltage: 12 - 24V- Charging current: 1 - 70A (1 - 100A eff)- Starting current: 650PA, 450CA- Charging capacity: 4 - 700Ah- Weight: 28kg- 3 programmed charging cycles + 1 manual cycle- Electronic potentiometer for current adjustment- Electronic control system- Charging cycle in 10 phases- Removal of sulphate deposits + recovery- Constant analysis- Supply function- Dual voltage 12/24V- Integrated electronic protection- Ideal for Start&Stop + Spiral batteries- Compatible batteries: PB, WET, GEL, AGM, SPIRAL, MF, VRLA

1 502,21 €*incl. VAT

1 241,50 €excl. VAT

Více informací

Charging contact Propulstation 5-pin male station

This contact for the Schumacher Propulstation is located in the charging station. The male contact connects to the booster via the 5-pin connector.Specifications:• Charging contact• Propulstation• 5-pin• Male• Placement: Charging station

27,13 €*incl. VAT

22,42 €excl. VAT

Více informací

Jump lead 4m 70mm² 850A

with clamps 850A & grey auxiliairy connector

608,75 €*incl. VAT

503,10 €excl. VAT

Více informací

Welding helmet LV1220 2 sensors DIN 11 Solar cells

The design is the result of an ergonomics study, with particular attention to the internal space that makes our mask user-friendly and comfortable to wear, fully protecting the face and neck. The material of the outer shell has a soft consistency and is highly resistant to both low and high temperatures, fire-safe, corrosion resistant with high durability.Technical specifications:- Viewing area: 90 mm x 34 mm- Helmet size: 110 mm x 90 mm x 9 mm- Arc sensor: 2- Light shade: DIN 3- Dark shade: DIN 11- On/off: automatic on/off- UV/IR protection: DIN 16- Power supply: solar cells- Switching time: 5/10,000s.- Operating temperature: -5°C ~ +55°C- Protection rating: 1/1/1/3- Filter model: 40097- True colour: -

62,92 €*incl. VAT

52,00 €excl. VAT

Více informací

Jump lead 3m 50mm² Caterpillar plug 24V

with CATERPILLAR 24V plug & grey auxiliairy connector

718,86 €*incl. VAT

594,10 €excl. VAT

Více informací

Battery charger FLASHMEM 100 12V 100A 2,5m cable

This battery charger for 12V batteries delivers a continuous and stable power supply of up to 100 amperes. The charger is equipped with a microprocessor and has a 2.5m cable.Performance characteristics:• Voltage: 12V• Input voltage: 110-240V - 50-60Hz • Current: 100A• Input power: 1700W• Charging current: 10-100A• Charging capacity: 10-1000Ah• Maintenance capacity: 10-3000AhTechnical characteristics:• Cable: 2.5m• Microprocessor• Application: reprogramming, flashing & diagnosis of cars• Selectable output voltage 14.8V• Protection against reverse polarity and short circuit• Protection against overload and voltage faults• Permanent and stable current• Robust clamps*Suitable for AGM, WET, Lithium LiFePO4

1 958,38 €*incl. VAT

1 618,50 €excl. VAT

Více informací

Charging cable 61cm GIGALITHIUM 12V with 12V plug

The GIGALITHIUM 12V 800A is rechargeable via the cigarette lighter. With this 61cm long cable, the booster can also be charged on the road.Specifications:• Charging cable• 12V plug• Suitable for GIGALITHIUM 12V 800A

6,29 €*incl. VAT

5,20 €excl. VAT

Více informací

Welding electrodes stainless steel 2,5 mm x 300 mm 50-70 Amp (30 pcs)

Stainless steel welding electrodes:- Diameter: 2.5 mm- Length: 300 mm- Quantity: 30- Current: 50-70 Amp

18,48 €*incl. VAT

15,27 €excl. VAT

Více informací

Charging reel 30A 2x10mm² 4,5+1,5m 6m with 923 clips

Cable reel with battery clamps 6m 30a ip42 max 48vCable reels, designed to ease, where necessary, the connection battery charger/battery in recharge.For the use on traction batteries the user can replace the delivered clamps with the proper connector.

870,76 €*incl. VAT

719,64 €excl. VAT

Více informací

Charging reel cable 30A 2x10mm² 7+2m

Cable reel 7+2 m - 2 x 10 c/923Cable reels, designed to ease, where necessary, the connection battery charger/battery in recharge.For the use on traction batteries the user can replace the delivered clamps with the proper connector.

1 402,07 €*incl. VAT

1 158,74 €excl. VAT

Více informací

Nabíječka baterií Hangcha - HAAIMB155-741000-000

Tato originální nabíječka Hangcha zajišťuje efektivní a bezpečné nabíjení baterií vysokozdvižných vozíků.

Compatibel met merk:	Hangcha

457,65 €*incl. VAT

378,22 €excl. VAT

Více informací

Battery Charger A3MC1-I

The battery charger A3MC1-I is a battery charger for electric forklifts and material handling.The battery charger recharges your machine's traction battery after use with a correct charging cycle. Essential to guarantee the availability of electric forklifts.Battery charger (type A3MC1-I)For electric forklifts / material handlingAlso known under reference: A3MC1-I

607,08 €*incl. VAT

501,72 €excl. VAT

Více informací

ATHENA LED Nabíječka 80V/100Ah - 3PH, 400Vac

Athena LED nabíječka 80V/100Ah je třífázová nabíječka baterií pro elektrické vysokozdvižné vozíky a manipulaci s materiálem.Tato nabíječka nabíjí 80V trakční baterie s LED indikací stavu a šetrnou nabíjecí křivkou. Ideální pro udržení provozuschopnosti těžkých elektrických strojů.Nabíječka baterií 80V / 100Ah, třífázováPro trakční baterie elektrických vysokozdvižných vozíkůNapájecí napětí: 400Vac

894,31 €*incl. VAT

739,10 €excl. VAT

Více informací

ATHENA LED Charger 48V/100Ah - 3PH, 400Vac

The Athena LED charger 48V/100Ah is a 3-phase battery charger for electric forklifts and material handling.This charger charges 48V traction batteries with an LED status indication and a battery-friendly charging curve. Ideal for keeping the availability of electric machines up to standard.Battery charger 48V / 100Ah, 3-phaseFor traction batteries of electric forkliftsSupply voltage: 400Vac

831,80 €*incl. VAT

687,44 €excl. VAT

Více informací

Kup si nabíječky baterií u JVD Parts

Tvoje průmyslová vozidla, jako jsou vysokozdvižné vozíky, retraky a nůžkové plošiny, potřebují pro efektivní provoz kvalitní baterie. Většina problémů u těchto strojů vzniká, když se baterie nabíjí nesprávně. Dokonalá kombinace se správnou nabíječkou zajistí, že ti baterie vydrží roky bez ztráty kapacity.

Nabíječky baterií najdeš u JVD Parts. Vyber si z naší široké nabídky ten správný produkt. Objednej do 13:00 a nabíječku dostaneš nejpozději do 3 pracovních dnů. Nenašel jsi, co hledáš? Kontaktuj náš tým. Rádi ti pomůžeme.

Objev nabíječku, která ti sedí

Nabíječky jsou nezbytné, i když baterii zrovna nepoužíváš. Tvoje baterie mají mírné samovybíjení, které z dlouhodobého hlediska vede k hlubokému vybití. Riskuješ tak nevratné poškození.

Konvenční nabíječka: často označovaná jako lineární nebo transformátorová nabíječka. Spolehlivá a levná. Jedinými nevýhodami jsou vyšší spotřeba energie a bzučení při nabíjení. Počítej s průměrnou dobou nabíjení 12 hodin.
Vysokofrekvenční nabíječka: zkracuje dobu nabíjení na 6 až 8 hodin. Tento typ je menší, lehčí a rychlejší, ale vyžaduje solidní investici.

Je důležité zvolit správnou nabíječku pro tvůj typ baterie. Mysli třeba na olověné baterie, gelové baterie, lithium-iontové baterie nebo baterie AGM. Vždy porovnej technické požadavky své baterie s nabíječkou, aby k sobě ideálně pasovaly. Ujisti se, že nabíjecí napětí nabíječky a baterie (ve voltech) je stejné. Dbej na to, aby nabíjecí proud nabíječky činil 20 % kapacity baterie (v ampérech). Mezi našimi značkami najdeš kvalitní deep-cycle baterie od výrobců Powerboozt, Trojan a Varta.

Jak používat nabíječku baterií

Pro optimální používání a dlouhou životnost baterie dbej na několik věcí:

Zajisti, aby kapacita tvé baterie nikdy neklesla pod 20 %.
Neodpojuj nabíječku od baterie příliš brzy.
Vyhni se zbytečnému průběžnému dobíjení, s výjimkou lithium-iontových baterií.

Doba nabíjení baterie závisí na typu baterie a typu nabíječky. Dobu nabíjení si snadno spočítáš sám tak, že kapacitu baterie vydělíš maximálním nabíjecím proudem. K tomu přičti ještě 2 až 4 hodiny na dobití z přibližně 80 % na 100 %.

Máš například baterii 200 Ah, která je vybitá napůl, a nabíječku 20 A? Pak je doba nabíjení 100/20 = 5 + 4 = 9 hodin. Přesto je nejlepší počítat s 12 hodinami na nabití baterie vysokozdvižného vozíku po celé osmihodinové směně.

Objednej si nabíječky baterií u JVD Parts

Už více než 60 let je JVD Parts tvým profesionálním partnerem pro díly a příslušenství pro průmyslová vozidla, jako jsou vysokozdvižné vozíky, nůžkové plošiny, zakladače a retraky. S nabíječkou z naší široké nabídky volíš kvalitní produkt.

Stále váháš? Pošli nám svůj dotaz. Rádi ti pomůžeme.

Kontaktujte nás

header.navigation.allCategories

Filtr

Filtr

Nabíječka baterií

Battery charger FLASHMEM 100 12V 100A 6m cable

Jump lead 3m 2x50mm² double 24V NATO plug

Memory Saver Detector OBD-L

Battery charger FLASHMEM 120 12V 120A 6m cable

TITAN 60 multifunctional battery charger/starter 12V-24V 60A

Jump lead 2m 50mm² 24V MAN plug

Battery charger FLASHMEM 60 12V 60A 6m cable

Battery charger FLASHMEM 120 12V 120A 2,5m cable

Battery 12V 1200A (CETEOR)

Welding helmet LV1820 4 sensors DIN 5-9/9-13 True color Wide screen

TITAN 100 multifunctional battery charger/starter 12V-24V 100A

Charging contact Propulstation 5-pin male station

Jump lead 4m 70mm² 850A

Welding helmet LV1220 2 sensors DIN 11 Solar cells

Jump lead 3m 50mm² Caterpillar plug 24V

Battery charger FLASHMEM 100 12V 100A 2,5m cable

Charging cable 61cm GIGALITHIUM 12V with 12V plug

Welding electrodes stainless steel 2,5 mm x 300 mm 50-70 Amp (30 pcs)

Charging reel 30A 2x10mm² 4,5+1,5m 6m with 923 clips

Charging reel cable 30A 2x10mm² 7+2m

Nabíječka baterií Hangcha - HAAIMB155-741000-000

Battery Charger A3MC1-I

ATHENA LED Nabíječka 80V/100Ah - 3PH, 400Vac

ATHENA LED Charger 48V/100Ah - 3PH, 400Vac

Kup si nabíječky baterií u JVD Parts

Objev nabíječku, která ti sedí

Jak používat nabíječku baterií

Objednej si nabíječky baterií u JVD Parts