Druppel- & onderhoudsladers

24V 48V 80V Boosters Overige Druppel- & onderhoudsladers Laadkabels & adapters

21 products found

Battery 12V 1200A (CETEOR)

for SOS & PPS 12V/1200CA, 12V/24-2400/1200CA & 24V/1200CA

€597.74*incl. VAT

€494.00excl. VAT

More info

Battery charger SCI90 6/12V with engine start mode

Extend the service life of your batteries with this multifunctional charger with start mode and fully automatic microprocessor-controlled charger. The SCI90 has automatic voltage detection (6V/12V). A built-in digital voltmeter/tester shows the battery voltage and charge percentage.- 6V/12V- 230V AC- 12V: 3A, 5A, 20A, 90A- 6V: 3A, 5A, 20A- Batteries: VRLA AGM, Lead-acid, SLA, PbCa- Dimensions: 245x275x180 mm- Weight: 6 kg

€309.88*incl. VAT

€256.10excl. VAT

More info

Charge controller & monitor SOLAR DUO 5A max

The OptiMATE charge controller checks the charge level while the battery charges from an OptiMATE SOLAR solar panel. It is suitable for charging 12V lead-acid and 12.8/13.2V lithium car batteries and for solar panels from 10 to 60W.

€112.85*incl. VAT

€93.26excl. VAT

More info

Memory Saver Detector OBD-L

€72.91*incl. VAT

€60.26excl. VAT

More info

OptiMate Lithium 4s 12,8V 6A

OptiMate Lithium 4s 6A is the advanced ‘PRO’ battery charger for your performance/race motorcycle, car or watercraft.This trickle charger features efficient and energy-saving charging technology. Even when your battery holds only 0.5V, it can still be saved with the help of the OptiMate Lithium 4s 6A.Advantages:Automatically adjusts the power supplyFull electronic protectionNever a flat battery againTests the battery conditionEnergy-savingWeatherproof: down to -40°CSplash-proof: IP54Specifications:Charge current: 6ACharge voltage: 12.8V - 13.2VOperating range: 0.5V - 14.4V

€229.01*incl. VAT

€189.26excl. VAT

More info

Rotating hanging hook for OptiMate 2-7 & Lithium

This rotating hook is suitable for hanging the battery charger. The hook is suitable for the OptiMate 2, 3, 4, 5, 6, 7 & lithium.

€11.21*incl. VAT

€9.26excl. VAT

More info

Schumacher SL876U Magnetic Flex Work Light

Schumacher SL876U Magnetic Flex Worklight

€64.49*incl. VAT

€53.30excl. VAT

More info

Set of suction cups for OptiMATE Solar panels

Kit of suction cups for Optimate Solar panels

€19.25*incl. VAT

€15.91excl. VAT

More info

Trickle charger OptiMate 1 VoltMatic 6-12V 0,6A

OptiMate 1 VoltMatic automatically adapts to the battery voltage (6V or 12V). As a result, no supervision or operation is required. In addition, the trickle charger is ideal for maintaining smaller batteries because it delivers 0,6 amp charging current. The battery charger is suitable for 6-12V lead-acid batteries, including STD (with filler caps), AGM & GEL (sealed VRLA). Recovers batteries from 4V and can be left connected thanks to the high-quality electronic protection.Specifications:• Ideal for: AGM, GEL and STD 6V or 12V batteries from 2-28Ah• Charging current: 0,6A (constant current)• Voltage: 6-12V• Voltage range: 4-14,4V• Indoor use: down to -20°C• IP50• Fully automatic: the VoltMatic microprocessor automatically selects the correct charging voltageSafety functions:• No risk of overcharging• Safe for vehicle electronics• Suppresses sparks• Safe for battery maintenance• Automatic shut-off in the event of a short circuit or battery disconnection

€80.60*incl. VAT

€66.61excl. VAT

More info

Trickle charger OptiMateLithium 8S, 24V 5A

OptiMate Lithium 8S, 24V- 5AOptiMate Lithium 8s 5A, the professional battery charger for the 25,6V/26,4V LiFeP04 / LFP in your light aircraft or medical equipment, with power support mode for diagnostics or software updating - The ultimate solution for '24V' Lithium batteries!Ideal for 25,6V/26,4V LiFeP04 / LFP batteries in the above vehicles / vessels.Power reset quickly reactivates the battery.Provides stable support for the battery while programming the ECU / troubleshooting.Fully automatic multi-step program safely brings the battery to full charge - Connect to the battery and OptiMate Lithium 8s 5A does the rest, no supervision needed!Advantages:Automatically adjusts power supply to battery size and conditionFull electronic protectionKeeps the battery charged and healthyRecovers low voltage from as little as 0.5VTests the condition of the batteryWarns of battery damageSpecifications:Charging current: 5ACharging voltage: 25,6V - 26,4VOperating range : 0,5V - 27,2V

€283.88*incl. VAT

€234.61excl. VAT

More info

Trickle charger PRO-1 DUO 12 V 10 A

OptiMate PRO-1 DUO is a professional battery charger-tester and power supply combination. It is suitable for new or used 12 V lead-acid (3-50Ah) and 12,8 V / 13,2 V LiFePO4 (2-20 Ah). It offers a choice of 3 functions: charging mode for 12 V lead-acid, charging mode for 12,8 V LiFePO4 or PowerSupply mode for battery support during diagnostics, tuning or repairs.The OptiMate PRO-1 DUO also has automatic fast battery activation. The green light indicates that the battery is in good condition and sufficiently charged. It also offers a smart recovery mode for batteries that have experienced a deep discharge. A bad battery is quickly recognised and recharged.- 100-240 V, 50-60 HZ- CE certification- Hanging hook and wall bracket included- IP40

€377.37*incl. VAT

€311.88excl. VAT

More info

Trickle charger SPI16 PRO 12-24V

This battery charger is suitable for any 12-24V vehicle. Engines, cars, buses, boats, work machines, trucks, etc. The battery charger is protected against large dust particles IP20 and has an operating temperature of -20°C to 50°C.Specifications:• Voltage: 12-24V• Nominal voltage: 230V AC - 50Hz• Nominal current: 4 - 8 - 16A• Battery charging capacity: 5 Ah - 360 Ah• Battery maintenance capacity: 5 Ah - 550Ah• Operating temperature: -20°C - 50°C• IP20Functions:• Showroom mode: 13,8V - 13A• Compatible batteries: GEL - WET - AGM - VRLA - MF - DRY - Start'n Stop - LiFePO4• Memory saver• Charging• ADAS charging• Recovery mode

€308.31*incl. VAT

€254.80excl. VAT

More info

Trickle charger SPI25 PRO 12-24V

This battery charger is suitable for any 12-24V vehicle. Motorcycles, cars, buses, boats, work machines, trucks, etc. The battery charger is protected against large dust particles IP20 and has an operating temperature of -20°C to 50°C. Specifications: • Voltage: 12-24V • Rated voltage: 230V AC - 50Hz • Rated current: 5 - 12.5 - 25A • Battery capacity charging: 5 Ah - 550 Ah • Battery capacity maintenance: 5 Ah - 800Ah • Operating temperature: -20°C - 50°C • IP20 Functions: • Showroom mode: 13.8V - 21A • Compatible batteries: GEL - WET - AGM - VRLA - MF - DRY - Start'n Stop - LiFePO4 • Memory saver • Charging • ADAS charging • Recovery mode

€416.84*incl. VAT

€344.50excl. VAT

More info

Welding electrodes rutile 2 mm x 300 mm 40-60 Amp (40 pieces)

Rutile welding electrodes:- Diameter: 2,0 mm- Length: 300 mm- Quantity: 40- Current: 40-60 Amp

€4.48*incl. VAT

€3.70excl. VAT

More info

Welding electrodes rutile 2,5 mm x 300 mm 60-80 Amp (29 pieces)

Rutile welding electrodes:- Diameter: 2,5 mm- Length: 300 mm- Quantity: 29- Current: 60-80 Amp

€5.51*incl. VAT

€4.55excl. VAT

More info

Welding electrodes rutile 3,2 mm x 350 mm 110-135 Amp (16 pieces)

Rutile welding electrodes:- Diameter: 3,2 mm- Length: 350 mm- Quantity: 16- Current: 110-135 A

€4.48*incl. VAT

€3.70excl. VAT

More info

Welding electrodes rutile 3,2 mm x 350 mm 110-135 Amp (66 pieces)

Rutile welding electrodes:- Diameter: 3,2 mm- Length: 350 mm- Quantity: 66- Current: 110-135 A

€18.01*incl. VAT

€14.88excl. VAT

More info

Welding electrodes stainless steel 2,5 mm x 300 mm 50-70 Amp (30 pcs)

Stainless steel welding electrodes:- Diameter: 2.5 mm- Length: 300 mm- Quantity: 30- Current: 50-70 Amp

€18.48*incl. VAT

€15.27excl. VAT

More info

Welding helmet LV1220 2 sensors DIN 11 Solar cells

The design is the result of an ergonomics study, with particular attention to the internal space that makes our mask user-friendly and comfortable to wear, fully protecting the face and neck. The material of the outer shell has a soft consistency and is highly resistant to both low and high temperatures, fire-safe, corrosion resistant with high durability.Technical specifications:- Viewing area: 90 mm x 34 mm- Helmet size: 110 mm x 90 mm x 9 mm- Arc sensor: 2- Light shade: DIN 3- Dark shade: DIN 11- On/off: automatic on/off- UV/IR protection: DIN 16- Power supply: solar cells- Switching time: 5/10,000s.- Operating temperature: -5°C ~ +55°C- Protection rating: 1/1/1/3- Filter model: 40097- True colour: -

€62.92*incl. VAT

€52.00excl. VAT

More info

Welding helmet LV1620 2 sensors DIN 9-13 True color

The design is the result of an ergonomic study, with special attention to the internal space that makes our mask easy to use and comfortable to wear, while the face and neck are fully protected. The material of the outer shell has a soft consistency and is highly resistant to both low and high temperatures, fireproof, corrosion-resistant with high durability.The newly developed protective screen is made with liquid crystals of the highest quality that provide top-level shielding against ultraviolet and infrared rays and a natural view from the screen. The maximum protection level is DIN 16, which makes it possible to protect the user against optical injuries caused by harmful rays.Technical specifications:- Viewing area: 92,5 mm x 42,5 mm- Cartridge size: 110 mm x 90 mm x 9 mm- Arc sensor: 2- Light shade: DIN 4- Dark shade: DIN 9-13- On/off: automatic on/off- UV/IR protection: DIN 16- Power supply: Solar cells + replaceable battery (CR2450)- Switching time: 3/10.000s.- Operating temperature: -5°C ~ +55°C- Protection rating: 1/1/1/1- Filter model: 40098- True color: Yes

€117.97*incl. VAT

€97.50excl. VAT

More info

Welding helmet LV1820 4 sensors DIN 5-9/9-13 True color Wide screen

The design is the result of an ergonomics study, with particular attention to the internal space that makes our mask easy to use and comfortable to wear, fully protecting the face and neck. The material of the outer shell has a soft consistency and is highly resistant to both low and high temperatures, fireproof, corrosion resistant with high durability.- Viewing area: 100 mm x 59.5 mm- Cartridge size: 133 mm x 114 mm x 10 mm- Arc sensors: 4- Light shade: DIN 4- Dark shade: DIN 5-9/9-13- On/off: automatic on/off- UV/IR protection: DIN 16- Power supply: Solar cells + replaceable battery (CR2450)- Switching time: 1/10,000s.- Operating temperature: -5°C ~ +55°C- Protection rating: 1/1/1/1- Filter model: 40099- True colour: Yes

€180.89*incl. VAT

€149.50excl. VAT

More info

All categories

Filter products

Filter products

Druppel- & onderhoudsladers

Battery 12V 1200A (CETEOR)

Battery charger SCI90 6/12V with engine start mode

Charge controller & monitor SOLAR DUO 5A max

Memory Saver Detector OBD-L

OptiMate Lithium 4s 12,8V 6A

Rotating hanging hook for OptiMate 2-7 & Lithium

Schumacher SL876U Magnetic Flex Work Light

Set of suction cups for OptiMATE Solar panels

Trickle charger OptiMate 1 VoltMatic 6-12V 0,6A

Trickle charger OptiMateLithium 8S, 24V 5A

Trickle charger PRO-1 DUO 12 V 10 A

Trickle charger SPI16 PRO 12-24V

Trickle charger SPI25 PRO 12-24V

Welding electrodes rutile 2 mm x 300 mm 40-60 Amp (40 pieces)

Welding electrodes rutile 2,5 mm x 300 mm 60-80 Amp (29 pieces)

Welding electrodes rutile 3,2 mm x 350 mm 110-135 Amp (16 pieces)

Welding electrodes rutile 3,2 mm x 350 mm 110-135 Amp (66 pieces)

Welding electrodes stainless steel 2,5 mm x 300 mm 50-70 Amp (30 pcs)

Welding helmet LV1220 2 sensors DIN 11 Solar cells

Welding helmet LV1620 2 sensors DIN 9-13 True color

Welding helmet LV1820 4 sensors DIN 5-9/9-13 True color Wide screen