To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

info@jvdparts.be

Customer reviews 8,2/10 (74 reviews) Customers rate us on average 8,2/10 (74 reviews)

€0.00*incl. VAT €0.00excl. VAT

Lagers & bussen

Lagers & bussen Assen & naven Tandwielen, riemen & poelies Veren Ruiten & cabineramen Palletrucks & stackers Stacker Reachtrucks Forklifts Gas spring Mirrors Controls Chains Seats & accessories Steekwagens Mast components Accessoires

352 products found

Plain bearing

The Genie plain bearing (ref. GE39474GT) is a bearing part for aerial platforms.A plain bearing allows two parts to move smoothly over each other and absorbs the load with low friction. In case of wear or play, replace the plain bearing to restore accurate and smooth operation.Plain bearing for aerial platformsFor smooth movement with low frictionArticle number: GE39474GT

€1.74*incl. VAT

€1.44excl. VAT

Plain Bearing

The Genie plain bearing (ref. GE47158) is a bearing part for aerial work platforms.A plain bearing allows two parts to move smoothly over each other and takes up the load with low friction. In case of wear or play, replace the plain bearing to restore accurate and smooth operation.Plain bearing for aerial work platformsFor smooth movement with low frictionArticle number: GE47158

€41.04*incl. VAT

€33.92excl. VAT

Plain Bearing

The Genie plain bearing (ref. GE47599) is a bearing part for aerial work platforms.A plain bearing allows two parts to move smoothly over each other and takes up the load with low friction. In case of wear or play, replace the plain bearing to restore accurate and smooth operation.Plain bearing for aerial work platformsFor smooth movement with low frictionArticle number: GE47599

€18.96*incl. VAT

€15.67excl. VAT

Plain bearing

The plain bearing is a bearing component for JLG machines.The plain bearing (bush) allows a rotating or sliding movement with minimal friction and absorbs the load between two parts. In case of play or wear, replace the plain bearing.Plain bearing/bush for moving partsJLG chassis componentOriginal part.

€32.65*incl. VAT

€26.98excl. VAT

Plain bearing

The plain bearing is a bearing component for JLG machines.The plain bearing (bush) allows a rotating or sliding movement with minimal friction and absorbs the load between two parts. In case of play or wear, replace the plain bearing.Plain bearing/bush for moving partsJLG chassis componentOriginal part.

€11.97*incl. VAT

€9.89excl. VAT

Plain bearing

The plain bearing is a bearing component for JLG machines.The plain bearing (bush) allows a rotating or sliding movement with minimal friction and absorbs the load between two parts. In case of play or wear, replace the plain bearing.Plain bearing/bush for moving partsJLG chassis componentOriginal part.

€24.45*incl. VAT

€20.21excl. VAT

Plain bearing

The plain bearing is a bearing component for JLG machines.The plain bearing (bush) allows a rotating or sliding movement with minimal friction and absorbs the load between two parts. In case of play or wear, replace the plain bearing.Plain bearing/bush for moving partsJLG chassis componentOriginal part.

€47.47*incl. VAT

€39.23excl. VAT

Plain bearing

The plain bearing is a bearing bush that absorbs friction between moving parts in forklifts and material handling.A plain bearing guides rotating or sliding shafts and pins with minimal friction and wear. In the event of play or wear, replace the plain bearing to restore the guidance and service life.Bearing bush for moving partsFor forklifts / material handlingOriginal part

€203.57*incl. VAT

€168.24excl. VAT

Plain bearing

The plain bearing is a bearing bush that absorbs friction between moving parts in forklifts and material handling.A plain bearing guides rotating or sliding shafts and pins with minimal friction and wear. In case of play or wear, replace the plain bearing to restore guidance and service life.Bearing bush for moving partsFor forklifts / material handlingOriginal part

€171.71*incl. VAT

€141.91excl. VAT

Plain bearing

The plain bearing is a bearing bush that absorbs friction between moving parts in forklifts and material handling.A plain bearing guides rotating or sliding shafts and pins with minimal friction and wear. In case of play or wear, replace the plain bearing to restore guidance and service life.Bearing bush for moving partsFor forklifts / material handlingOriginal part

€171.71*incl. VAT

€141.91excl. VAT

Plain bearing

The plain bearing is a bearing bush that absorbs friction between moving parts in forklifts and material handling.A plain bearing guides rotating or sliding shafts and pins with minimal friction and wear. In case of play or wear, replace the plain bearing to restore guidance and service life.Bearing bush for moving partsFor forklifts / material handlingOriginal part

€50.75*incl. VAT

€41.94excl. VAT

Plain bearing

The plain bearing is a bearing bush that absorbs friction between moving parts in forklifts and material handling.A plain bearing guides rotating or sliding shafts and pins with minimal friction and wear. In case of play or wear, replace the plain bearing to restore guidance and service life.Bearing bush for moving partsFor forklifts / material handlingOriginal part

€24.78*incl. VAT

€20.48excl. VAT

Plain Bearing 1230ES

The plain bearing (ref. 1230ES) is a bearing component for the JLG 1230ES for JLG machines.The plain bearing (bush) allows a rotating or sliding movement with minimal friction and absorbs the load between two parts. When there is play or wear, replace the plain bearing.Plain bearing/bush for moving partsJLG chassis componentAlso known under reference: 1230ESOriginal part.

€30.52*incl. VAT

€25.22excl. VAT

Plain Bearing Set

The plain bearing set is a set of bearing bushes for moving parts in forklifts and material handling.Plain bearings guide rotating or sliding shafts and pins with minimal friction. The set replaces worn bearings so that play and wear disappear and guidance runs smoothly again.Set of plain bearings / bearing bushesFor forklifts / material handling

€610.38*incl. VAT

€504.45excl. VAT

Pre-lubricated bushing

The pre-lubricated bushing is a plain-bearing bushing for hinged or rotating connections.The bushing forms a sliding surface between two moving parts and reduces friction and wear. Because it is pre-lubricated, it provides immediate lubrication and a long service life at hard-to-reach pivot points.Pre-lubricated plain-bearing bushingFor forklifts and material handlingOriginal part for bearings and bushings

€34.52*incl. VAT

€28.53excl. VAT

Pump Support Bushing

PUMP SUPPORT BUSHING

€325.59*incl. VAT

€269.08excl. VAT

Ralla Prelubrificata

The pre-lubricated bushing (ralla prelubrificata) is a plain-bearing bushing for rotating chassis connections.The bushing serves as a sliding surface between moving parts and limits friction and wear. The pre-lubricated version provides immediate lubrication and low-maintenance use at pivot points in the chassis and steering.Pre-lubricated plain-bearing bushingFor forklifts and material handlingOriginal part for bearings and bushings

€11.50*incl. VAT

€9.50excl. VAT

Ralla Prelubrificata

The pre-lubricated bushing (ralla prelubrificata) is a plain-bearing bushing for rotating chassis connections.The bushing forms the sliding surface between two moving parts and reduces friction and wear. Thanks to the pre-lubricated version, immediate, low-maintenance lubrication is assured at loaded pivot points.Pre-lubricated plain-bearing bushingFor forklifts and material handlingOriginal part for bearings and bushings

€26.56*incl. VAT

€21.95excl. VAT

Ring

Ring

€0.54*incl. VAT

€0.45excl. VAT

Ring 25 x 30 x 30

The ring 25 x 30 x 30 is a bushing/ring for the chassis of forklifts and material handling.This ring or bushing guides or positions rotating or hinging parts and takes up play, size 25 x 30 x 30. This way it ensures the correct fit and limits wear between components. Replace this part in case of play or wear.Bushing/ring, size 25 x 30 x 30Guides and fills up playFor forklifts / material handling

€7.08*incl. VAT

€5.85excl. VAT

Ring 25 x 33.5 x 22

The ring 25 x 33.5 x 22 is a bushing/ring for the chassis of forklifts and material handling.This ring or bushing guides or positions rotating or hinging parts and takes up play, size 25 x 33,5 x 22. This way it ensures the correct fit and limits wear between components. Replace this part in case of play or wear.Bushing/ring, size 25 x 33,5 x 22Guides and fills up playFor forklifts / material handling

€7.99*incl. VAT

€6.60excl. VAT

Ring 35 x 40 x 20

The ring 35 x 40 x 20 is a bushing/ring for the chassis of forklifts and material handling.This ring or bushing guides or positions rotating or hinging parts and takes up play, size 35 x 40 x 20. This way it ensures the correct fit and limits wear between components. Replace this part in case of play or wear.Bushing/ring, size 35 x 40 x 20Guides and fills up playFor forklifts / material handling

€11.28*incl. VAT

€9.32excl. VAT

Rod end bearing

The ball joint bearing (rod end) is a bearing component for forklifts and material handling.A rod end bearing allows a combined rotating and tilting movement and absorbs load at pivot and steering points. In case of play or wear, replace the bearing to keep the movement smooth and safe.Ball joint bearing (rod end) for the chassisFor forklifts / material handling

€8.58*incl. VAT

€7.09excl. VAT

Rod end bearing

The Genie rod end bearing (ref. GE35ES) is a bearing part for aerial platforms.A rod end bearing bears the load and allows a rotating or hinging movement to run smoothly with minimal friction. In case of play, noise or stiff movement, replace the bearing to restore proper operation.Rod end bearing for aerial platformsBears the load and reduces frictionArticle number: GE35ES

€33.24*incl. VAT

€27.47excl. VAT