The ball bearing 6309-2RS (ref. 6309-2RS) is a sealed deep-groove ball bearing for rotating parts in forklifts and material handling equipment.A deep-groove ball bearing takes up radial and limited axial loads and lets shafts rotate smoothly with little friction; the 2RS version is sealed on both sides against dirt. In case of play, noise or wear, replace the bearing.Sealed deep-groove ball bearing (2RS)Also known under reference: 6309-2RS
The bearing 6905 zz (ref. 6905) is a bearing for the chassis and drive of forklifts and material handling.A bearing guides a rotating shaft with minimal friction and absorbs the radial and/or axial loads. Shielded version (ZZ). As a wear part, it determines the smooth and quiet operation of wheels, axles and gearboxes. Replace this bearing in case of play, noise or stiffness.Bearing for shaft and driveGuides with minimal frictionAlso known under reference: 6905For forklifts / material handling
The sealed deep groove ball bearing 6310-2RS (ref. 6310-2RS) is a ball bearing sealed on both sides.The 2RS seal on both sides keeps dirt out and grease in, so the bearing runs maintenance-free and protected in dusty environments. It absorbs radial and limited axial loads with low friction.Double-sided sealed deep groove ball bearing, type 6310-2RSFor forklifts and material handlingAlso known under reference: 6310-2RS
The wheel bearing (bearing for wheel) is a bearing for the hub of a wheel.A wheel bearing lets the wheel rotate smoothly around the axle while absorbing the radial and axial forces of driving. When worn, play or noise develops; replacement restores a stable, safe wheel movement.Wheel bearing for the hubFor forklifts and material handlingOriginal part for bearings and bushings
The bearing klnj3/8 - 2rsr (ref. KLNJ3/8, 2RSR) is a bearing for the chassis and drive of forklifts and material handling.A bearing guides a rotating shaft with minimal friction and absorbs the radial and/or axial loads. Sealed version (2RSR). As a wear part, it determines the smooth and quiet operation of wheels, axles and gearboxes. Replace this bearing in case of play, noise or stiffness.Bearing for shaft and driveGuides with minimal frictionAlso known under reference: KLNJ3/8, 2RSRFor forklifts / material handling
The open ball bearing 6310 (ref. 6310) is a deep groove ball bearing for rotating shafts.A deep groove ball bearing absorbs radial and limited axial loads and lets the shaft rotate smoothly with low friction. The open version type 6310 is a widely used standard bearing for drive and wheel suspension.Open deep groove ball bearing, type 6310For forklifts and material handlingAlso known under reference: 6310
The brass bushing is a bearing and bush part for the chassis of forklifts and material handling equipment.The brass bushing guides or supports a shaft or pin and limits friction, wear and play between moving parts. In the event of wearing out, replacement restores a tight, smooth operation.Brass bushing for the chassisFor forklifts / material handlingSuitable as a replacement for the original part.
The bronze plain bearing Griptech is a plain bearing/bushing for the chassis of forklifts and material handling.A bronze plain bearing guides a shaft or pivot point with low friction and withstands high loads and dirt, often self-lubricating. This way it limits wear on slow-moving parts. Replace this part in case of play or wear.Bronze plain bearing / bushing (Griptech)Wear-resistant and load-bearingFor forklifts / material handling
