info@jvdparts.be
Customer reviews 8,2/10 (75 reviews) Customers rate us on average 8,2/10 (75 reviews)
Go to homepage
€0.00*incl. VAT €0.00excl. VAT
Go to homepage
€0.00*incl. VAT €0.00excl. VAT
header.navigation.popularParts
Trojan Battery Company
Trojan Battery Company
Novatio
Novatio
Expresso
Expresso
RAM Mounts
RAM Mounts
Filter products
Filter products
–

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders
2497 products found
RAM® ball base with 2 3/8" 2-hole pattern – C size

RAM® ball base with 2 3/8" 2-hole pattern – C size

The RAM-247U-2NHB consists of a 2" clamp base with a 1.5" ball. Hardware not included.

€49.68*incl. VAT
€41.06excl. VAT
More info
RAM® ball base with 2" x 2" 4-hole pattern - B size

RAM® ball base with 2" x 2" 4-hole pattern - B size

The RAM-B-202U-2525 features a 1" diameter rubber ball connected to a square plate with a 4-hole pattern of 2" x 2" centre-to-centre.

€28.17*incl. VAT
€23.28excl. VAT
More info
RAM® ball base with 2" x 2" 4-hole pattern – C size

RAM® ball base with 2" x 2" 4-hole pattern – C size

The RAM-202U-2525 is a C size ball with a 2" x 2" square hole pattern.

€32.77*incl. VAT
€27.08excl. VAT
More info
RAM® ball base with 5/16"-18 post - B size

RAM® ball base with 5/16"-18 post - B size

The RAM-B-239U consists of a 1" diameter rubber ball, connected to a 5/16"-18 threaded post.

€17.04*incl. VAT
€14.08excl. VAT
More info
RAM® ball base with 5/16"-18 post – C size

RAM® ball base with 5/16"-18 post – C size

The RAM-239 is a ball in C size with a 1.5" diameter with an extended post and a 5/16"-16 threaded post with external thread.

€29.06*incl. VAT
€24.02excl. VAT
More info
RAM® ball base with Flush Tube wedge adapter - B size

RAM® ball base with Flush Tube wedge adapter - B size

The new RAM wedge adapter for flush-mount rod holders is a great way to mount a wide range of RAM products. Simply slide the wedge into the round opening of your flush-mount rod holder and tighten the screw to secure the wedge. The RAM wedge adapter base expands to accommodate openings with an inner diameter of 1 1/2" to 1 7/8". Once installed, you have the perfect way to mount anything from RAM rod holders, cup holders, cameras, fishfinders and much more. Whether you want to keep your rod and reel off the deck to avoid salt spray, need more versatility in rod holder placement, or simply need an extra mounting position and don't want to drill holes, this is your perfect solution.

€43.72*incl. VAT
€36.13excl. VAT
More info
RAM® ball base with flush-tube wedge adapter - C size

RAM® ball base with flush-tube wedge adapter - C size

The new RAM wedge adapter for flush-mounted rod holders is a great way to mount a wide range of RAM products. Simply slide the wedge into the round opening of your flush-mounted rod holder and tighten the screw to secure the wedge. The RAM wedge adapter base expands to accommodate openings with an inner diameter of 1 1/2" to 1 7/8". Once installed you have the perfect way to mount anything from RAM rod holders, cup holders, cameras, fishfinders and much more. Whether you are trying to lift your rod and reel off the deck to avoid salt spray, need more versatility in rod holder placement, or simply need a different mounting position and don't want to drill holes, this is your perfect solution.

€52.78*incl. VAT
€43.62excl. VAT
More info
RAM® ball base with hexagonal hole for photo post

RAM® ball base with hexagonal hole for photo post

The RAM® ball base with hexagonal hole for photo post (art. RAM-215U) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.The ball base forms the starting point of a RAM® mount: connect a socket arm and holder to position a device steplessly and secure it vibration-proof.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-215UOriginal RAM® Mounts part.

€80.31*incl. VAT
€66.37excl. VAT
More info
RAM® ball base with photo post

RAM® ball base with photo post

The RAM® ball base with photo post (art. RAM-208U) is a mounting component from the modular RAM® Mounts system for securely fitting equipment in vehicles, forklifts and material handling.The ball base forms the starting point of a RAM® mount: connect a socket arm and holder to position a device steplessly and secure it vibration-proof.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-208UOriginal RAM® Mounts part.

€50.63*incl. VAT
€41.84excl. VAT
More info
RAM® ball base with rail plate for Tite-Lok

RAM® ball base with rail plate for Tite-Lok

The RAM® ball base with rail plate for Tite-Lok (art. RAM-D-228U) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.This clamp or U-bolt base clamps around a bar, handlebar or rail and provides a solid ball mounting point without needing to drill.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-228UOriginal RAM® Mounts part.

€107.69*incl. VAT
€89.00excl. VAT
More info
RAM® Ball Base with Universal Plate

RAM® Ball Base with Universal Plate

The RAM-122BU consists of a rubber ball with a diameter of 1.5" connected at a right angle to a flat rectangular plate of 2" x 17". The plate features various combinations of pre-drilled holes that match many electronic devices and mounts.

€123.95*incl. VAT
€102.44excl. VAT
More info
RAM® ball for Bosch

RAM® ball for Bosch

The RAM® ball for Bosch (art. RAM-263U) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The part is part of the modular RAM® ball-and-socket system and holds equipment vibration-proof and adjustable in place.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-263UOriginal RAM® Mounts part.

€51.07*incl. VAT
€42.21excl. VAT
More info
RAM® ball with Tallon inner base

RAM® ball with Tallon inner base

RAM 1" ball adapter and Tallon™ flush mount receiver. The receiver can be installed at the factory or retrofitted into virtually any type of boat, camper or kayak in just a few minutes.

€145.56*incl. VAT
€120.30excl. VAT
More info
RAM® base brackets for seat-rail mount

RAM® base brackets for seat-rail mount

The RAM-160BBU consists of a set of replacement feet for our original No-Drill vehicle mount.

€100.94*incl. VAT
€83.42excl. VAT
More info
RAM® belt clip holder and button adapter for IntelliSkin® HD™

RAM® belt clip holder and button adapter for IntelliSkin® HD™

The RAP-382-CLIP1U consists of a belt clip with quick-connect button adapter for any IntelliSkin® HD™. Simply snap the button adapter onto the corner receiver of the IntelliSkin® HD™ housing to connect your phone to the convenient and ergonomic belt clip accessory.

€22.02*incl. VAT
€18.20excl. VAT
More info
RAM® Bi-Pod base with 1/2" NPT opening

RAM® Bi-Pod base with 1/2" NPT opening

The RAM® Bi-Pod base with 1/2" NPT opening (art. RAM-161BU) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.This base or mounting element forms the anchoring point of a RAM® setup and is combined with ball, arm and holder into a sturdy assembly.With NPT threaded connectionFor vehicles, forklifts and material handlingAlso known under reference: RAM-161BUOriginal RAM® Mounts part.

€208.68*incl. VAT
€172.46excl. VAT
More info
RAM® Bi-Pod holder with ball

RAM® Bi-Pod holder with ball

The RAM® Bi-Pod holder with ball (art. RAM-161-BU-MN2) is a mounting component from the modular RAM® Mounts system for securely fixing equipment in vehicles, forklifts and material handling.The component is part of the modular RAM® ball-and-socket system and holds equipment in place vibration-proof and adjustable.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-161-BU-MN2Original RAM® Mounts part.

€359.78*incl. VAT
€297.34excl. VAT
More info
RAM® black 3.5" adhesive plate for suction cups

RAM® black 3.5" adhesive plate for suction cups

The RAP-350-35BU, a round disc of 3.5" diameter with adhesive layer, is an excellent mounting surface to attach a suction cup system. Simply stick the plate on any surface and then attach the suction cup to the plate. This is perfect when you want to mount your suction cup holder to your car dashboard, vertically or horizontally, instead of to your windscreen.

€28.04*incl. VAT
€23.17excl. VAT
More info
RAM® black 3" adhesive plate for suction cups

RAM® black 3" adhesive plate for suction cups

The RAP-350-3BU, a round disc of 3" diameter with adhesive layer, is an excellent mounting surface to attach a suction cup system. Simply stick the plate on any surface and then attach the suction cup to the plate. This is perfect when you want to mount your suction cup holder to your car dashboard, vertically or horizontally, instead of to your windscreen.

€18.46*incl. VAT
€15.26excl. VAT
More info
RAM® black rosette adhesive plate for suction cups

RAM® black rosette adhesive plate for suction cups

The RAP-350BU, a round rosette disc of 3" diameter with adhesive layer, is an excellent mounting surface to attach a suction cup system. Simply stick the plate on any surface and then attach the suction cup to the plate. This is perfect when you want to mount your suction cup holder to your car dashboard, INCLUDING CURVED SURFACES, vertically or horizontally, instead of to your windscreen.

€31.84*incl. VAT
€26.31excl. VAT
More info
RAM® Bond-A-Base™ adhesive base with ball

RAM® Bond-A-Base™ adhesive base with ball

The RAP-398-BLK-202U consists of the grey RAM® Bond-A-Base™, a flexible PVC mounting pad, and the C-size 1.5" ball. Easy to install with the included 3M VHB double-sided adhesive pad that connects the Bond-A-Base™ to your kayak, stand-up paddleboard or inflatable vessel.

€109.89*incl. VAT
€90.82excl. VAT
More info
RAM® Bond-A-Base™ adhesive base with RAM® Tough-Track™

RAM® Bond-A-Base™ adhesive base with RAM® Tough-Track™

Add a reliable and secure rail mounting system to any smooth surface with the RAM® Bond-A-Base™ with Tough-Track™. This base serves as a perfect adhesive dashboard rail in a car or truck, and for adhesive mounting on any kayak, belly boat, stand-up paddleboard or inflatable vessel. Easy to install with the included 3M VHB double-sided adhesive pad that connects the Bond-A-Base™ to your surface. The Bond-A-Base™ holds the composite Tough-Track™ with an overall length of 7.25”, allowing you to mount your favorite devices – action cameras, fishfinders, phones, rod holders and more – with compatible RAM® rail bases.

€76.30*incl. VAT
€63.06excl. VAT
More info
RAM® Bond-A-Base™ black adhesive base

RAM® Bond-A-Base™ black adhesive base

The RAM® Bond-A-Base™ is a flexible PVC mounting pad onto which a RAM ball base or spline/post base can be attached. Easy to install with the included 3M VHB double-sided adhesive pad that connects the Bond-A-Base™ to your kayak, stand-up paddleboard or inflatable vessel.

€68.15*incl. VAT
€56.32excl. VAT
More info
RAM® Bond-A-Base™ black adhesive base with ball

RAM® Bond-A-Base™ black adhesive base with ball

The RAP-398-BLK-202U consists of the black RAM® Bond-A-Base™, a flexible PVC mounting pad, and the C size 1.5" ball. This base allows the attachment of all C size socket arm components to complete any rugged RAM holder. Easy to install with the included 3M VHB double-sided adhesive pad that connects the Bond-A-Base™ to your kayak, stand-up paddleboard or inflatable vessel.

€109.60*incl. VAT
€90.58excl. VAT
More info
The forklift parts
specialist in Belgium
Order your products
online safely
Orders
shipped the same day
Easy parts
returning
This website uses cookies to ensure the best experience possible. More information...