To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

info@jvdparts.be

Customer reviews 8,2/10 (75 reviews) Customers rate us on average 8,2/10 (75 reviews)

€0.00*incl. VAT €0.00excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® form-fit holder for TDS Nomad & Nomad X

RAM® form-fit holder for TDS Nomad & Nomad X

The RAM-HOL-TD4U consists of a high-quality composite holder with a hole pattern allowing it to be mounted to any RAM part or holder with the universal AMPS hole pattern. This holder is compatible and interchangeable with a wide range of popular RAM mounting products and is ready to complement your mobile device and become the most useful accessory in your vehicle. Included is a set of four nuts and bolts to attach the holder to RAM parts or holders with the universal AMPS hole pattern.

€26.75*incl. VAT

€22.11excl. VAT

RAM® form-fit holder for TDS Ranger

RAM® form-fit holder for TDS Ranger

The RAM-HOL-TD2U consists of a high-quality composite holder with a hole pattern allowing it to be mounted to any RAM part or holder with the universal AMPS hole pattern. This holder is compatible and interchangeable with a wide range of popular RAM mounting products and is ready to complement your mobile device and become the most useful accessory in your vehicle. Included is a set of four nuts and bolts to attach the holder to RAM parts or holders with the universal AMPS hole pattern.

€39.36*incl. VAT

€32.53excl. VAT

RAM® Form-Fit holder for the Garmin nuvi 300, 310, 350, 360 & 370

RAM® Form-Fit holder for the Garmin nuvi 300, 310, 350, 360 & 370

The RAM-HOL-GA21U consists of a high-strength composite holder with a hole pattern that allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this holder is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

€18.83*incl. VAT

€15.56excl. VAT

RAM® Form-Fit holder for the Garmin Rino 520, 520HCx, 530 & 530HCx

RAM® Form-Fit holder for the Garmin Rino 520, 520HCx, 530 & 530HCx

The RAM-HOL-GA20U consists of a high-strength composite holder with a hole pattern that allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this holder is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

€17.02*incl. VAT

€14.07excl. VAT

RAM® form-fit holder for TomTom GO 510, 710 & 910

RAM® form-fit holder for TomTom GO 510, 710 & 910

The RAM-HOL-TO3U consists of a high-quality composite holder with a hole pattern allowing it to be mounted to any RAM part or holder with the universal AMPS hole pattern. This holder is compatible and interchangeable with a wide range of popular RAM mounting products and is ready to complement your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to RAM parts or holders with the universal AMPS hole pattern.

€24.82*incl. VAT

€20.51excl. VAT

RAM® form-fit holder for TomTom ONE 125, 130 & 130S

RAM® form-fit holder for TomTom ONE 125, 130 & 130S

The RAM-HOL-TO7U consists of a high-quality composite holder with a hole pattern allowing it to be mounted to any RAM part or holder with the universal AMPS hole pattern. This holder is compatible and interchangeable with a wide range of popular RAM mounting products and is ready to complement your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to RAM parts or holders with the universal AMPS hole pattern.

€16.58*incl. VAT

€13.70excl. VAT

RAM® form-fit holder for TomTom ONE 2nd & 3rd edition

RAM® form-fit holder for TomTom ONE 2nd & 3rd edition

The RAM-HOL-TO4U consists of a high-grade composite holder with a hole pattern that allows it to be attached to any RAM parts or holders with the universal AMPS hole pattern. This holder is compatible and interchangeable with a wide range of popular RAM mounting products and is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to RAM parts or holders with the universal AMPS hole pattern.

€14.34*incl. VAT

€11.85excl. VAT

RAM® form-fit holder for TomTom ONE XL & XLS

RAM® form-fit holder for TomTom ONE XL & XLS

The RAM-HOL-TO5U consists of a high-quality composite holder with a hole pattern allowing it to be mounted to any RAM part or holder with the universal AMPS hole pattern. This holder is compatible and interchangeable with a wide range of popular RAM mounting products and is ready to complement your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to RAM parts or holders with the universal AMPS hole pattern.

€15.14*incl. VAT

€12.51excl. VAT

RAM® form-fit holder for TomTom Start 45, XL 325, XL 330, XL 350 + more

RAM® form-fit holder for TomTom Start 45, XL 325, XL 330, XL 350 + more

RAM high-quality composite holder for the TomTom Start 45 series and TomTom XL 325-350 series. Included is a set of two nuts and bolts to attach the holder to RAM parts or holders with the universal AMPS hole pattern.

€18.53*incl. VAT

€15.31excl. VAT

RAM® form-fit holder for TomTom Start 55, XXL 535, XXL 550 + more

RAM® form-fit holder for TomTom Start 55, XXL 535, XXL 550 + more

The RAM-HOL-TO10U consists of a high-grade composite holder with a hole pattern that allows it to be attached to any RAM parts or holders with the universal AMPS hole pattern. This holder is compatible and interchangeable with a wide range of popular RAM mounting products and is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to RAM parts or holders with the universal AMPS hole pattern.

€22.02*incl. VAT

€18.20excl. VAT

RAM® form-fit holder for Trimble Recon

RAM® form-fit holder for Trimble Recon

The RAM-HOL-TD1U consists of a high-quality composite holder with a hole pattern allowing it to be mounted to any RAM part or holder with the universal AMPS hole pattern. This holder is compatible and interchangeable with a wide range of popular RAM mounting products and is ready to complement your mobile device and become the most useful accessory in your vehicle. Included is a set of four nuts and bolts to attach the holder to RAM parts or holders with the universal AMPS hole pattern.

€34.16*incl. VAT

€28.23excl. VAT

RAM® Form-Fit holder for Zebra ET6x

RAM® Form-Fit holder for Zebra ET6x

This RAM® Dock (RAM-HOL-ZE25U) features a non-powered form-fit design, made specifically for the Zebra ET60 & ET65 tablets. Built for versatility in the field, this dock supports the device with or without the attachable Zebra keyboard and features a unique 2-in-1 lock that both secures the tablet and allows the keyboard to open and close independently. In addition, this dock is accessory-ready, compatible with the RAM® Vent-Temp™, RAM® Temp-Right™, RAM® NFC Extender, and two small device mounting zones on both the left and right sides of the dock. The cut-out on the left side of the dock provides easy access to the Zebra CAC reader with the ability to open and close the CAC reader cover. The ET6x is compatible with the Zebra hand strap and shoulder strap while seated in the RAM® dock. Complete the solution by building out your mount. These docks are RAM® Compatible™ and feature 75mm VESA or 4-hole AMPS patterns for adding a ball adapter. Take advantage of thousands of RAM® mounting components to build the perfect ET60/ET65 solution. These thoughtful features enable a mobile workforce across a wide range of industries, including field/utility services, public safety, construction and more.

€251.47*incl. VAT

€207.83excl. VAT

RAM® Form-Fit holder for Zebra ET8x 2-in-1 tablet

RAM® Form-Fit holder for Zebra ET8x 2-in-1 tablet

This RAM® Dock (RAM-HOL-ZE22U) has a non-powered, non-locking form-fit design specifically for the Zebra ET8x tablets. Built for versatility in the field, this dock supports the device with or without the Rugged Frame and is compatible with the optional Friction Hinge Rugged Keyboard. Thoughtfully designed, this dock also accommodates tablet expansions such as the Zebra Expansion Back, GDS® Roto-Mag™ and GDS® Hand-Stand™ ergonomic accessories. Brave the elements with options to expand your dock with temperature modules. The RAM® Temp-Right™ can be added to regulate heat in extremely cold environments, while the RAM® Vent-Temp™ uses the vehicle's A/C vents to direct warm or cold air to the ET8x. Go one step further by upgrading to an optional NFC Repeater module that extends the device's internal NFC reader. Combine this with the dock's built-in two-hole mounting plate, compatible with the RAM® two-hole diamond base, for mounting the NFC Repeater or another additional device such as a phone, scanner or printer.

€231.06*incl. VAT

€190.96excl. VAT

RAM® Form-Fit holder for Zebra TC22 & TC27 with Boot

RAM® Form-Fit holder for Zebra TC22 & TC27 with Boot

This spring-loaded form-fit holder (RAM-HOL-ZE24U) lets you mount the Zebra TC22 and TC27 handheld computer with the Rugged Boot. This holder includes an integrated stylus holder that clicks your stylus into place when not in use, and accommodates the Zebra hand strap and the extended battery pack. Complete your solution by adding a compatible RAM® 2-hole AMPS pattern diamond base and a B- or C-size ball mount, for a wide range of mounting options (hardware included).

€99.18*incl. VAT

€81.97excl. VAT

RAM® Form-Fit holder for Zebra TC22 & TC27 without Boot

RAM® Form-Fit holder for Zebra TC22 & TC27 without Boot

This spring-loaded form-fit holder (RAM-HOL-ZE24-1U) lets you mount the Zebra TC22 and TC27 handheld computer without the Rugged Boot. This dock includes top and bottom spacers for a form-fit when docking the device without the Rugged Frame. This holder includes an integrated stylus holder that clicks your stylus into place when not in use, and accommodates the Zebra hand strap. Complete your solution by adding a compatible RAM® 2-hole AMPS pattern diamond base and a B- or C-size ball mount, for a wide range of mounting options (hardware included).

€109.82*incl. VAT

€90.76excl. VAT

RAM® form-fit holder for Zebra TC51, 52, 56 & 57

RAM® form-fit holder for Zebra TC51, 52, 56 & 57

This spring-loaded holder without power lets you secure your Zebra TC51, TC52, TC56 and TC57, with or without the Rugged Boot and Handstrap accessories. The holder is compatible with RAM® 2-hole AMPS pattern diamond bases that connect to B and C size ball holders, allowing a wide range of mounting options.

€58.36*incl. VAT

€48.23excl. VAT

RAM® Form-Fit Holder for Zebra TC70, 72, 75 & 77

RAM® Form-Fit Holder for Zebra TC70, 72, 75 & 77

The RAM® Form-Fit Holder for Zebra TC70, 72, 75 & 77 (RAM-HOL-ZE7-NP-2U) is a spring-loaded holder with stylus holder that allows you to mount your Zebra TC70, TC72, TC75 or TC77 with or without the Zebra Handstrap accessory. The holder is compatible with RAM® 2-hole AMPS pattern diamond bases that connect to B- and C-size ball mounts, for a wide range of mounting options (mounting hardware included). Covered by a lifetime warranty.

€59.73*incl. VAT

€49.36excl. VAT

RAM® Form-Fit holder for Zebra TC73 & TC78

RAM® Form-Fit holder for Zebra TC73 & TC78

This spring-loaded, form-fit, non-powered holder (RAM-HOL-ZE17-NP-1U) allows you to mount the Zebra TC73 and the TC78 rugged handheld PC. This holder includes an integrated stylus holder that clicks your stylus into place when it is not in use, and is suitable for the Zebra hand strap. Complete your solution by adding a compatible RAM® diamond base with a two-hole AMPS pattern and a B- or C-size ball holder, allowing a wide range of mounting options (mounting hardware included). This holder has an integrated recess for the RAM® wireless charger, letting you transform this non-powered holder into a charging solution. To use the RAM® wireless charger, the device must be equipped with the Zebra wireless charging battery.

€90.56*incl. VAT

€74.84excl. VAT

RAM® Form-Fit holder with combination lock for Honeywell RT10 tablet

RAM® Form-Fit holder with combination lock for Honeywell RT10 tablet

This RAM® vehicle dock features a combination lock as theft prevention. The RAM® vehicle dock has a Form-Fit design specifically for the rugged Honeywell RT10 tablet, with cut-outs that leave all buttons and ports clear. The dock also allows the tablet's scan function to work through the cut-out at the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® 4-hole AMPS bases in C and D size and 75mm x 75mm VESA pattern bases for attaching a dual socket arm to complete your mounting solution. Go one step further with the built-in 2-hole mounting plate that is compatible with a RAM® 2-hole diamond base for mounting an additional device such as a phone or other handheld device. An included optional accessory bracket makes it possible to attach RAM® 2-hole diamond bases for device mounting and features a cable management system.

€151.07*incl. VAT

€124.85excl. VAT

RAM® Form-Fit holder with key lock for Honeywell RT10 tablet

RAM® Form-Fit holder with key lock for Honeywell RT10 tablet

This RAM® vehicle dock features a key lock as theft prevention. The RAM® vehicle dock has a Form-Fit design specifically for the rugged Honeywell RT10 tablet, with cut-outs that leave all buttons and ports clear. The dock also allows the tablet's scan function to work through the cut-out at the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® 4-hole AMPS bases in C and D size and 75mm x 75mm VESA pattern bases for attaching a dual socket arm to complete your mounting solution. Go one step further with the built-in 2-hole mounting plate that is compatible with a RAM® 2-hole diamond base for mounting an additional device such as a phone or other handheld device. An included optional accessory bracket makes it possible to attach RAM® 2-hole diamond bases for device mounting and features a cable management system.

€178.79*incl. VAT

€147.76excl. VAT

RAM® Form-Fit lockable holder for Garmin Dezl 770LMTHD

RAM® Form-Fit lockable holder for Garmin Dezl 770LMTHD

The RAM-HOL-GA70LU is a lockable high-strength composite housing for the Garmin dezl 770LMTHD. RAM has designed a Form-Fit holder that supports the device and protects it from vibrations. We have also moulded a sun visor into the design to shield the screen, and the diamond hole pattern allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this lockable housing is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

€46.92*incl. VAT

€38.78excl. VAT

RAM® Form-Fit lockable holder for Garmin dezl™ 760LMT + More

RAM® Form-Fit lockable holder for Garmin dezl™ 760LMT + More

The RAM-HOL-GA61LU consists of a lockable high-strength composite housing with a hole pattern that allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this lockable housing is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

€54.37*incl. VAT

€44.93excl. VAT

RAM® Form-Fit lockable holder for Garmin fleet 660/670

RAM® Form-Fit lockable holder for Garmin fleet 660/670

The RAM-HOL-GA66LU consists of a lockable high-strength composite housing with a hole pattern that allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this lockable housing is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

€48.80*incl. VAT

€40.33excl. VAT

RAM® Form-Fit lockable holder for Getac ZX10

RAM® Form-Fit lockable holder for Getac ZX10

The RAM® Form-Fit lockable holder for Getac ZX10 (RAM-HOL-GE4KLU) is a holder with quick release that allows you to securely mount the device in a wide range of applications. Equip this passive holder with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the Standard & High capacity batteries and the Hard Carry Handle. Go one step further with the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases, to mount an additional device such as a phone or other handheld device. Includes a set of keys for locking.

€269.18*incl. VAT

€222.46excl. VAT