Montagecomponenten
2497 products found
RAM® Level Cup™ 16oz cup holder with ball
The RAM® Level Cup™ is the perfect self-levelling, gyroscopic cup holder for any vehicle, including motorcycles, ATVs, trucks and much more. Thanks to two pivot points, the self-levelling function keeps your drink upright, even in the most demanding conditions. The integrated eye and hook offer an optional securing function that lets you secure any small or open container in any harsh environment. Compatible with cups, cans, bottles and mugs from 2.5" to 3.5" in diameter. Drink koozie included.
€43.32*incl. VAT
€35.80excl. VAT
RAM® Level Cup™ 16oz drink holder with double socket arm
The RAM® Level Cup™ is the perfect self-levelling, gyroscopic cup holder accessory for any vehicle, including motorcycles, ATVs, trucks and much more. Thanks to two pivot points, the self-levelling function keeps your drink upright – even in the most demanding conditions. The integrated eye and hook provide an optional attachment feature that lets you secure any small or open container. The RAM® Level Cup™ is compatible with cups, cans, bottles and mugs from 2.5" to 3.5" in diameter. Drink cooler included.
€58.99*incl. VAT
€48.75excl. VAT
RAM® Level Cup™ drink holder for RAM® Stack-N-Stow™ bait board
The RAP-395W-132U consists of the RAM Level Cup™ self-levelling drink holder, connected to a wedge-shaped base, that slides onto and locks onto the side of RAM STACK-N-STOW™ bait boards. This gyroscopic drink cup holder has two pivot points, so your drink always stays upright and never spills. A koozie is included with the purchase of the RAP-395W-132U. Compatible with all cups, cans, bottles or mugs with a diameter of 2.5” to 3.5”.
€26.74*incl. VAT
€22.10excl. VAT
RAM® Level Cup™ koozie insert
The RAM® Level Cup™ koozie insert is more than just an insert that lets you place a standard 12 ounce can in all of our self-levelling cup holders. It is also a stylish drink accessory that is guaranteed to draw attention at the beach or during your next backyard barbecue. Keep your drink cool and your hand warm with the latest in drink mounting technology.
€10.02*incl. VAT
€8.28excl. VAT
RAM® Level Cup™ XL 32oz drink holder with ball
Designed for larger insulated cups, plastic water bottles or even your trusty steel coffee mug, the Level Cup™ XL features a gyroscopic self-levelling system that keeps your drink upright regardless of the conditions. This kit includes the RAM® Level Cup™ XL with a directly attached 1" B size rubber ball. The extra-large opening accommodates the largest cups and the adjustable bottom piece moves up and down to accommodate taller cups. In addition, the rubber feet flex to fit different cup sizes. Drink koozie included.
€77.37*incl. VAT
€63.94excl. VAT
RAM® Level Cup™ XL 32oz drink holder with double socket arm
Designed for larger insulated cups, plastic water bottles or even your trusty steel coffee mug, the Level Cup™ XL features a gyroscopic self-levelling system that keeps your drink upright regardless of the conditions. This kit includes a long arm that is compatible with any B-size mounting base. This gives you the flexibility to place your cup wherever you need it. The extra-large opening accommodates even the largest gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to also fit various cup sizes. RAM® Mounts has refined the self-levelling action to keep your cups full.
€115.46*incl. VAT
€95.42excl. VAT
RAM® Level Cup™ XL 32oz drink holder with single socket arm
Designed for larger insulated cups, plastic water bottles or even your trusty steel coffee mug, the Level Cup™ XL features a gyroscopic self-levelling system that keeps your drink upright regardless of the conditions. This set includes a Level Cup XL with an integrated single socket arm. This cup holder can be attached to any B-size base or RAM® Mounts B-size ball accessory. The extra-large opening accommodates the largest gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet also flex to fit different cup sizes. RAM® Mounts has refined the self-levelling action to keep your cups full.
€77.62*incl. VAT
€64.15excl. VAT
RAM® Level Cup™ XL with ball
Designed for larger insulated cups, plastic water bottles or even your trusty steel coffee mug, the Level Cup™ XL features a gyroscopic self-levelling system that keeps your drink upright, regardless of the conditions. This set includes a Level Cup XL with a C-size RAM® Mounts ball attached directly. The extra-large opening accommodates the biggest gulps and the adjustable lower section moves up and down to accommodate taller cups. The rubber feet flex to fit various cup sizes. RAM® Mounts has refined the self-levelling action to keep your cups full.
€89.32*incl. VAT
€73.82excl. VAT
RAM® Level-Base™
The RAM Level Base adapter allows you to mount a RAM® 202 series on any uneven surface. Simply place the Level Base adapter on the surface you are mounting to, then place the RAM 202 series plate over the top of the adapter, align the holes, and then secure the assembly with the appropriate hardware for your installation application.
€16.00*incl. VAT
€13.22excl. VAT
RAM® Light-Speed™ rod holder with Revolution socket arm
The RAP-370-RB-NBU consists of the RAM ROD® Light-Speed™ rod holder and RAM ROD® Revolution ratchet arm with single open socket. Thanks to the patented RAM rubber ball, socket and ratchet feature, you can rotate the rod holder 360 degrees, while tilting the rod holder forwards and backwards for the optimal fishing angle. The RAM ROD® Light-Speed™ is another innovative product in RAM's long line of high-quality, leading fishing products. Ideally suited for spinning reels and baitcasting reels, the Light-Speed rod holder offers smooth operation when inserting and removing the rod, yet holds firmly in rough water or while trolling. The spring-loaded design allows quick removal of the rod and reel when you have a fish, and offers easy placement of the rod into the rod holder.
€107.64*incl. VAT
€88.96excl. VAT
RAM® Light-Speed™ rod holder without base
The RAP-370-NBU consists of the RAM ROD® Light-Speed™ rod holder, 4" long spline post without mounting base. Designed for vertical or horizontal mounting in your boat, you can rotate the rod holder 360 degrees while tilting it forward and backward for the optimal fishing angle. The RAM ROD® Light-Speed™ is another innovative product in RAM's long list of high-quality, leading fishing products. Ideally suited for spinning reels and casting reels, the Light-Speed rod holder offers smooth operation when inserting and removing the rod, but holds firmly in rough water or while trolling. The spring-loaded design allows quick removal of the rod and reel when there is a fish, and offers easy placement of the rod in the rod holder.
€86.58*incl. VAT
€71.55excl. VAT
RAM® Lil Buddy™ adhesive dashboard base with RAM® Snap-Link™ ball
The RAP-SB-180NBU consists of the Lil Buddy™ adhesive stick-on base and RAM ball that attaches to the back of the RAM-HOL-UN7U. Using an adhesive disc, you can place the Lil Buddy™ almost anywhere you want to keep your handheld device clearly visible and always within reach. Thanks to its very small footprint, it easily finds a spot on your dashboard or console. This mount rotates 180 degrees.
€19.54*incl. VAT
€16.15excl. VAT
RAM® Lil Buddy™ adhesive dashboard mount with Garmin G-Ball
Minimalist in design yet incredibly useful is the RAM Lil Buddy™ mount. Using an adhesive disc, you can place the Lil Buddy™ virtually anywhere you want to keep your GPS clearly visible and always within reach. Designed with a very small footprint, it easily finds a spot on your dashboard or console. For all Garmin users: please note that the Lil Buddy™ attaches directly to any Garmin GPS Personal Navigation Device with a factory mounting bracket that is suitable for the Garmin "G-Ball". This mount rotates 180 degrees.
€21.19*incl. VAT
€17.51excl. VAT
RAM® lockable Form-Fit dock for Zebra TC53 & TC58
This lockable, spring-loaded, form-fit, non-powered dock allows you to mount the Zebra TC53 and the TC58 with or without the Zebra rugged boot. Features include an integrated stylus holder that clicks your stylus into place when not in use, access to the device's speaker and microphone while docked, and compatibility with the Zebra hand strap. The dock is compatible with RAM® diamond bases with a two-hole AMPS pattern that fit B- and C-size ball holders, allowing a wide range of mounting options (hardware included). This holder has an integrated recess for the RAM® wireless charger, letting you turn this non-powered holder into a charging solution. To use the RAM® wireless charger, the device must be equipped with the Zebra wireless charging battery.
€122.23*incl. VAT
€101.02excl. VAT
RAM® lockable Form-Fit holder for Zebra ET6x
This key-lockable RAM® Dock (RAM-HOL-ZE25LU) has a non-powered form-fit design, specially for the Zebra ET60 & ET65 tablets. Made for versatility in the field, this dock supports the device with or without the attachable Zebra keyboard and features a unique 2-in-1 lock that both secures the tablet and allows the keyboard to open and close independently. In addition, this dock is accessory-ready, compatible with the RAM® Vent-Temp™, RAM® Temp-Right™, RAM® NFC Extender, and two small device mounting zones on both the left and right sides of the dock. The ET6x is compatible with the Zebra hand strap and shoulder strap while in the RAM® dock. The recess on the left side of the dock provides easy access to the Zebra CAC reader with the ability to open and close the CAC reader flap. Complete the solution by assembling your holder. These docks are RAM® Compatible™ and equipped with 75mm VESA or 4-hole AMPS patterns for adding a ball adapter. Make use of thousands of RAM® mounting components to assemble the perfect ET60/ET65 solution. These thoughtful features enable a mobile workforce across a wide range of sectors, including field/utility services, public safety, construction and more.
€298.88*incl. VAT
€247.01excl. VAT
RAM® lockable Form-Fit holder for Zebra ET8x 2-in-1 tablet
This lockable RAM® Dock (RAM-HOL-ZE22LU) has a non-powered form-fit design specifically for the Zebra ET8x tablets. Built for versatility in the field, this dock supports the device with or without the Rugged Frame and is compatible with the optional Friction Hinge Rugged Keyboard. Thoughtfully designed, this dock also accommodates tablet expansions such as the Zebra Expansion Back, GDS® Roto-Mag™ and GDS® Hand-Stand™ ergonomic accessories. Brave the elements with options to expand your dock with temperature modules. The RAM® Temp-Right™ can be added to regulate heat in extremely cold environments, while the RAM® Vent-Temp™ uses the vehicle's A/C vents to direct warm or cold air to the ET8x. Go one step further by upgrading to an optional NFC Repeater module that extends the device's internal NFC reader. Combine this with the dock's built-in two-hole mounting plate, compatible with the RAM® two-hole diamond base, for mounting the NFC Repeater or another additional device such as a phone, scanner or printer.
€276.29*incl. VAT
€228.34excl. VAT
RAM® lockable Form-Fit holder for Zebra TC73 & TC78
This lockable, spring-loaded, form-fit, non-powered holder (RAM-HOL-ZE17L-NP-1U) allows you to mount the Zebra TC73 and the TC78 rugged handheld PC. This holder includes an integrated stylus holder that clicks your stylus into place when it is not in use, and is suitable for the Zebra hand strap. Complete your solution by adding a compatible RAM® diamond base with a two-hole AMPS pattern and a B- or C-size ball holder, allowing a wide range of mounting options (mounting hardware included). This holder has an integrated recess for the RAM® wireless charger, letting you transform this non-powered holder into a charging solution. To use the RAM® wireless charger, the device must be equipped with the Zebra wireless charging battery.
€126.92*incl. VAT
€104.89excl. VAT
RAM® lockable form-fit USB-C dock for Zebra TC22 & TC27 without Boot
The RAM® lockable form-fit USB-C dock for Zebra TC22 & TC27 without Boot (RAM-HOL-ZE24L-C-1U) is a rugged dock that meets and exceeds the demands of modern workflows, with a USB-C connection tested for more than 250,000 cycles. The spring-loaded design of this dock allows quick one-handed insertion or removal of your device, while the precise design of the dock housing minimises human error and port damage when docking the device onto the USB-C male connector. The rear cavity of the dock accommodates ergonomic accessories attached to the back of the device. An integrated cut-out on the top provides the ability to operate buttons, ports and scanner without removing the device from the dock. The key lock offers peace of mind and theft prevention for busy environments. Complete the solution by building your holder—this holder is RAM® Compatible™ with a 2-hole AMPS pattern for adding a diamond ball adapter.
€411.65*incl. VAT
€340.21excl. VAT
RAM® lockable modular power + single USB dock for Samsung Tab Active5 and 3
The RAM® lockable modular power + single USB dock for Samsung Tab Active5 and Tab Active3 (RAM-HOL-SAM58CPKLN-1AU) is thoughtfully designed to meet the demands of truck drivers, field technicians, school transport drivers, logistics managers, forklift drivers and more. Power and data sync capabilities are supplied to the device via GDS® pogo pins, while you use this holder's USB port to support one additional peripheral, making this the ideal, compact mounting solution for your mobile workstation. This key-lockable modular dock is compatible with the device's RAM® Skin™ or factory skin, along with most RAM® accessories, including: temperature control accessories, RAM® NFC Extender and side bracket accessories. Modular docks are not compatible with the GDS® Hand-Stand™ but are with the GDS® Roto-Mag™. Access to the stylus is maintained while the device is docked. Included is a set of four nuts and bolts to attach the dock to any RAM® components with the universal AMPS hole pattern.
€234.22*incl. VAT
€193.57excl. VAT
RAM® lockable modular USB-C powered dock for Samsung Tab Active5 & 3
The RAM® lockable modular powered dock for Samsung Tab Active5 & Tab Active3 (RAM-HOL-SAM58CPKLNU) is thoughtfully designed to meet the demands of truck drivers, field service technicians, student transporters, logistics managers, forklift drivers and more. Power capabilities through the dock are delivered to the device via pogo pin technology, using the pogo pad docking contacts of the Tab Active5 & 3—simply place the device in the dock for a seamless charging experience. This key-lockable modular dock is compatible with the RAM® Skin™ or the device's factory skin, along with most RAM® accessories including: temperature control accessories, RAM® NFC Extender and side bracket accessory attachments. Modular docks are not compatible with the GDS® Hand-Stand™ but are compatible with the GDS® Roto-Mag™. Access to the stylus is retained while the device is docked. Included is a set of four nuts and bolts to connect the dock to any RAM® component with the universal AMPS hole pattern.
€211.94*incl. VAT
€175.16excl. VAT
RAM® lockable Power + Data Dock for Getac ZX10
With the RAM® lockable Power + Data Dock for Getac ZX10 (RAM-HOL-GE4PDKLU) you can mount the device and keep it charged via the pogo pin contacts while docked—power is delivered by connecting to the 5.5mm DC power connector of the dock. Add a peripheral with the built-in USB Type-A cord and connect a keyboard, barcode scanner, printer and more. Equip it with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the Standard & High capacity batteries and the Hard Carry Handle. Go one step further with the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases, to mount an additional device such as a phone or other handheld device. Includes a set of keys for locking.
€411.57*incl. VAT
€340.14excl. VAT
RAM® lockable Power + Dual USB Data Dock for Getac ZX10
With the RAM® lockable Power + Dual USB Data Dock for Getac ZX10 (RAM-HOL-GE4PD2KLU) you can mount the device and keep it charged via the pogo pin contacts while docked—power is delivered by connecting to the 5.5mm DC power connector of the dock. Add up to two peripherals with the built-in dual USB Type-A cord and connect a keyboard, barcode scanner, printer and more. Equip it with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the Standard & High capacity batteries and the Hard Carry Handle. Go one step further with the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases, to mount an additional device such as a phone or other handheld device. Includes a set of keys for locking.
€423.09*incl. VAT
€349.66excl. VAT
RAM® lockable powered dock + single USB-A for Zebra MC3300/3400/3450
The RAM® lockable powered dock + single USB-A for Zebra MC3300/3400/3450 (RAM-HOL-ZE33PDLU) features a form-fit holder specifically designed for the Zebra MC3300/MC3400/MC3450 Mobile Computer Series. Charging capabilities are provided via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A single peripheral allows connection to one (1) input device. The key lock provides peace of mind and theft prevention for busy environments. This holder comes with a shim for a secure fit for the MC3400 & MC3450 and is designed for easy one-handed placement of the device. Complete the solution by assembling your holder—these docks are RAM® Compatible™ and equipped with a 2-hole AMPS pattern for adding a ball adapter. Assemble your perfect MC3300/MC3400/MC3450 mount by making use of thousands of RAM® mounting components.
€420.08*incl. VAT
€347.17excl. VAT
RAM® Lockable Powered Dock + USB-A for Honeywell CT40/45/47
The RAM® Lockable Powered Dock + USB-A for Honeywell CT40/45/47 (RAM-HOL-HON12PDLU) is a spring-loaded, form-fit powered dock that allows workers to secure and charge their Honeywell device. Power to the device is supplied via a 1m female 5.5mm DC barrel connector and supports one peripheral via a USB-A female connector. This dock features an integrated stylus holder that clicks your stylus into place when not in use and is designed to support OEM accessories such as the hand strap. The upper cup of the holder has a cut-out so workers can use the device's scanner while docked. This holder comes with optional inserts to support devices with or without the protective rubber boot. The key lock provides theft prevention and added security for peace of mind in busy environments. Complete your solution by adding a compatible RAM® 2-hole AMPS pattern diamond base and double ball mount, for a wide range of mounting options (mounting hardware included).
€261.65*incl. VAT
€216.24excl. VAT