To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

info@jvdparts.be

Customer reviews 8,2/10 (75 reviews) Customers rate us on average 8,2/10 (75 reviews)

€0.00*incl. VAT €0.00excl. VAT

Universele houders

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

471 products found

RAM® double 90-degree tilt mount with knob

RAM® double 90-degree tilt mount with knob

The RAM® double 90-degree tilt mount with knob (RAP-101-PV4-2PU) is a low-profile drill-down mounting solution with two hinges in opposite directions, so users can easily tilt their device up to 180 degrees in any direction. Each end features 2-hole and 4-hole AMPS patterns to easily install any RAM® holder or GDS® dock and attach the mount to any surface. This solution uses toothed lock washers and extended knobs at each hinge point that allow users to adjust their device for the ideal viewing angle.

€75.09*incl. VAT

€62.06excl. VAT

RAM® double ball diamond mount - B size long

RAM® double ball diamond mount - B size long

The RAM-B-102U-C consists of a long double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" and include two holes 1.912" centre-to-centre, placed at both ends of the diamond base. The hole pattern on the diamond bases fits many RAM mounts, as well as third-party mounts, including mounts with the industry-standard AMPS hole pattern. The mount incorporates a patented 1" diameter rubber ball-and-socket system with adjustment points at both socket ends of the arm.

€66.65*incl. VAT

€55.08excl. VAT

RAM® double ball diamond mount - B size medium

RAM® double ball diamond mount - B size medium

The RAM-B-102U consists of a double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" and include two holes 1.912" centre-to-centre, placed at both ends of the diamond base. The hole pattern on the diamond bases fits many RAM mounts, as well as third-party mounts, including mounts with the industry-standard AMPS hole pattern. The mount incorporates a patented 1" diameter rubber ball-and-socket system with adjustment points at both socket ends of the arm.

€51.16*incl. VAT

€42.28excl. VAT

RAM® double ball diamond mount - B size short

RAM® double ball diamond mount - B size short

The RAM-B-102U-A consists of a short double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" and include two holes 1.912" centre-to-centre, placed at both ends of the diamond base. The hole pattern on the diamond bases fits many RAM mounts, as well as third-party mounts, including mounts with the industry-standard AMPS hole pattern. The mount incorporates a patented 1" diameter rubber ball-and-socket system with adjustment points at both socket ends of the arm.

€49.37*incl. VAT

€40.80excl. VAT

RAM® double ball diamond plate mount - A-size long

RAM® double ball diamond plate mount - A-size long

The RAM-A-101U-B consists of a long double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" and contain two holes at 1.912" centre-to-centre, positioned at both ends of the diamond base. The hole pattern on the diamond bases fits many RAM mounts, as well as third-party mounts, including mounts with the industry-standard AMPS hole pattern. The mount incorporates a patented rubber ball-and-socket system of 0.56" diameter with adjustment points at both socket ends of the arm.

€93.80*incl. VAT

€77.52excl. VAT

RAM® double ball diamond plate mount - A-size medium

RAM® double ball diamond plate mount - A-size medium

The RAM-A-101U consists of a double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" and contain two holes at 1.912" centre-to-centre, positioned at both ends of the diamond base. The hole pattern on the diamond bases fits many RAM mounts, as well as third-party mounts, including mounts with the industry-standard AMPS hole pattern. The mount incorporates a patented rubber ball-and-socket system of 0.56" diameter with adjustment points at both socket ends of the arm.

€60.84*incl. VAT

€50.28excl. VAT

RAM® double ball glareshield clamp mount with ski mirror adapter

RAM® double ball glareshield clamp mount with ski mirror adapter

The RAM-B-126BU consists of our medium-length B size arm with our glareshield clamp base and ski mirror adapter.

€110.19*incl. VAT

€91.07excl. VAT

RAM® double ball holder with 50x100mm VESA plate - medium

RAM® double ball holder with 50x100mm VESA plate - medium

The RAM® double ball holder with 50x100mm VESA plate - medium (art. RAM-D-101U-243) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The VESA plate provides a standardised bolt pattern to attach a monitor, screen or terminal to a RAM® ball or arm system.With standardised VESA bolt patternFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-101U-243Original RAM® Mounts part.

€252.16*incl. VAT

€208.40excl. VAT

RAM® double ball holder with 50x100mm VESA plate - short

RAM® double ball holder with 50x100mm VESA plate - short

The RAM® double ball holder with 50x100mm VESA plate - short (art. RAM-D-101U-C-243) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The VESA plate provides a standardised bolt pattern to attach a monitor, screen or terminal to a RAM® ball or arm system.With standardised VESA bolt patternFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-101U-C-243Original RAM® Mounts part.

€198.14*incl. VAT

€163.75excl. VAT

RAM® double ball holder with diamond plate adapter – medium

RAM® double ball holder with diamond plate adapter – medium

The RAM-138U consists of a 2.5" diameter round base with the universal AMPS hole pattern, a double socket arm and a diamond base adapter. The holder is fitted with a patented 1.5" diameter rubber ball-and-socket system that has adjustment points at both ends of the double socket arm; this allows virtually infinite adjustability and perfect viewing angles. The hole pattern on the diamond base adapter fits most RAM holders. RAM's patented design dampens shocks and vibrations, helping to extend the lifespan of your device.

€90.45*incl. VAT

€74.75excl. VAT

RAM® double ball holder with diamond plate adapter – short

RAM® double ball holder with diamond plate adapter – short

The RAM-138U-B consists of a 2.5" diameter round base with the universal AMPS hole pattern, a short double socket arm and a diamond base adapter. The holder is fitted with a patented 1.5" diameter rubber ball-and-socket system that has adjustment points at both ends of the double socket arm; this allows virtually infinite adjustability and perfect viewing angles. The hole pattern on the diamond base adapter fits most RAM holders. RAM's patented design dampens shocks and vibrations, helping to extend the lifespan of your device.

€87.58*incl. VAT

€72.38excl. VAT

RAM® double ball holder with mounting plate

RAM® double ball holder with mounting plate

The RAM-B-101U-225B2 consists of a double socket arm, two round bases with a diameter of 2.5" featuring the universal AMPS hole pattern, a 2.10" x 2.60" mounting plate and mounting hardware. The holder is designed with a rubber ball and socket system of 1" diameter with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability for ideal viewing angles.

€70.63*incl. VAT

€58.37excl. VAT

RAM® double ball holder with round AMPS plate and 50x100mm VESA plate

RAM® double ball holder with round AMPS plate and 50x100mm VESA plate

The RAM® double ball holder with round AMPS plate and 50x100mm VESA plate (art. RAM-D-101U-GAM1) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The VESA plate provides a standardised bolt pattern to attach a monitor, screen or terminal to a RAM® ball or arm system.With standardised VESA bolt patternFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-101U-GAM1Original RAM® Mounts part.

€252.77*incl. VAT

€208.90excl. VAT

RAM® double ball holder with steel-reinforced round plates - D-size short

RAM® double ball holder with steel-reinforced round plates - D-size short

The RAM® double ball holder with steel-reinforced round plates - D-size short (art. RAM-D-101U-C-IN1) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The component is part of the modular RAM® ball-and-socket system and holds equipment vibration-proof and adjustable in place.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-101U-C-IN1Original RAM® Mounts part.

€221.02*incl. VAT

€182.66excl. VAT

RAM® double ball holder with two large marine electronics plates

RAM® double ball holder with two large marine electronics plates

The RAM® double ball holder with two large marine electronics plates (art. RAM-D-133U) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.The component is part of the modular RAM® ball-and-socket system and holds equipment securely in place, vibration-proof and adjustable.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-133UOriginal RAM® Mounts part.

€318.93*incl. VAT

€263.58excl. VAT

RAM® double ball holder with two large round plates - D size long

RAM® double ball holder with two large round plates - D size long

The RAM-D-101U consists of (2 pieces) round bases of 3.68" diameter and a LONG double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The holder incorporates a patented ball-and-socket system with a 2.25" diameter rubber ball, with adjustment points at both socket ends of the arm.

€304.16*incl. VAT

€251.37excl. VAT

RAM® double ball holder with two large round plates - D size medium

RAM® double ball holder with two large round plates - D size medium

The RAM-D-101U consists of (2 pieces) round bases of 3.68" diameter and a double socket arm of STANDARD length. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The holder incorporates a patented ball-and-socket system with a 2.25" diameter rubber ball, with adjustment points at both socket ends of the arm.

€256.53*incl. VAT

€212.01excl. VAT

RAM® double ball holder with two large round plates - D size short

RAM® double ball holder with two large round plates - D size short

The RAM-D-101U consists of (2 pieces) round bases of 3.68" diameter and a SHORT double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The holder incorporates a patented ball-and-socket system with a 2.25" diameter rubber ball, with adjustment points at both socket ends of the arm.

€201.63*incl. VAT

€166.64excl. VAT

RAM® double ball holder with two round AMPS plates

RAM® double ball holder with two round AMPS plates

The RAM® double ball holder with two round AMPS plates (art. RAM-D-102U) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The component is part of the modular RAM® ball-and-socket system and holds equipment vibration-proof and adjustable in place.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-D-102UOriginal RAM® Mounts part.

€233.55*incl. VAT

€193.02excl. VAT

RAM® double ball hose strap clamp mount with round plate – short

RAM® double ball hose strap clamp mount with round plate – short

The RAM-B-108U-A consists of a 1" diameter rubber ball mounted perpendicular to a v-shaped base, a SHORT double socket arm and a 2.5" base with the universal AMPS hole pattern. The mount is designed with the patented RAM 1" diameter rubber ball-and-socket system with adjustment points at both ends of the double socket arm, allowing virtually infinite adjustability and perfect viewing angles.

€71.86*incl. VAT

€59.39excl. VAT

RAM® double ball mount – aluminium mounting plate medium

RAM® double ball mount – aluminium mounting plate medium

The RAM-101-SAE1 consists of a 6-inch double socket arm, a round base with a 2.5" diameter featuring the universal AMPS hole pattern and a rectangular 2" x 2.5" base with pre-drilled holes in each corner of the base plate. The mount incorporates a patented rubber ball-and-socket system with a 1.5" diameter, with adjustment points at both socket ends of the arm. The rubber ball-and-socket technology allows virtually infinite adjustment and perfect viewing angles. This kit comes with a mounting plate and is a through-deck mount.

€138.04*incl. VAT

€114.08excl. VAT

RAM® double ball mount – aluminium mounting plate short

RAM® double ball mount – aluminium mounting plate short

The RAM-101-B-SAE1 consists of a 3.56" double socket arm, a round base with a diameter of 2.5" with the universal AMPS hole pattern and a rectangular base of 2" x 2.5" with pre-drilled holes in each corner of the base plate. The holder incorporates a patented rubber ball-and-socket system with a diameter of 1.5", with adjustment points at both socket ends of the arm. The rubber ball-and-socket technology allows virtually infinite adjustment and perfect viewing angles. This set is also supplied with a mounting plate.

€132.08*incl. VAT

€109.16excl. VAT

RAM® double ball mount – composite mounting plate short

RAM® double ball mount – composite mounting plate short

The RAM-101-B-SAE1P consists of a 3.56" double socket arm, a round base with a diameter of 2.5" with the universal AMPS hole pattern, a rectangular base of 2" x 2.5" with pre-drilled holes in each corner of the base plate and a composite mounting plate. The holder incorporates a patented rubber ball-and-socket system with a diameter of 1.5", with adjustment points at both socket ends of the arm. The rubber ball-and-socket technology allows virtually infinite adjustment and perfect viewing angles. This set is also supplied with a mounting plate.

€99.75*incl. VAT

€82.44excl. VAT

RAM® double ball mount for forklift overhead guard with large round plate

RAM® double ball mount for forklift overhead guard with large round plate

The RAM® double ball mount for forklift overhead guard with large round plate (art. RAM-E-101-335) is a mounting component from the modular RAM® Mounts system for securely mounting equipment in vehicles, forklifts and material handling.This base or mounting element forms the anchor point of a RAM® setup and is combined with ball, arm and holder into a sturdy assembly.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-E-101-335Original RAM® Mounts part.

€754.48*incl. VAT

€623.54excl. VAT