Držáky RAM

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

4411 products found

RAM® X-Grip® phone holder with 3/8"-16 threaded ball base

The RAP-B-236-A-UN7U consists of a base with 3/8"-16 threaded pin, short double socket arm and universal spring-loaded X-Grip® holder for phones. The holder incorporates a patented 1" diameter rubber ball-and-socket system, with adjustment points at both ends of the socket arm; with a turn of the arm knob, you move the holder to your optimal viewing position. The included X-Grip® holder has a sleek and smart four-legged design that provides excellent holding power without hiding your phone behind foam rubber and plastic. The spring-loaded X-Grip® holder expands and contracts for a perfect fit of your phone. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM® X-Grip® is the evolved phone holder. The X-Grip® includes a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.

87,53 €*incl. VAT

72,34 €excl. VAT

Více informací

RAM® X-Grip® phone holder with 9mm angled bolt head adapter - composite

The RAP-B-272-A-UN7U consists of an angled base with 9mm hole, short composite dual socket arm and universal spring-loaded RAM® X-Grip® holder for phones. The angled base is often used on motorcycles, attached to the mirror frame; the main motorcycle brand for this part is BMW. The included X-Grip® holder has a sleek and clever four-legged design that provides excellent holding power without hiding your phone behind foam rubber and plastic. The spring-loaded X-Grip® holder expands and contracts for a perfect fit of your phone. As the perfect complement to the modern, sleek interior of today’s vehicles, the RAM® X-Grip® is the evolved phone holder. The X-Grip® includes a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.

95,83 €*incl. VAT

79,20 €excl. VAT

Více informací

RAM® X-Grip® phone holder with 9mm angled bolt-head adapter

The RAM-B-272-A-UN7 consists of an angled base with 9mm hole, SHORT double socket arm and universal spring-loaded X-Grip® holder for mobile phones. The angled base is often used on motorcycles, attached to the mirror frame; the main brand for this part is BMW. The included X-Grip® holder has a clean, clever four-leg design with great holding power without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts for a perfect fit of your mobile phone. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved phone holder. The X-Grip® includes a device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that fit within the dimensions below. It is important to check the dimensions of your handheld device with case/sleeve/skin when determining the overall size.

109,29 €*incl. VAT

90,32 €excl. VAT

Více informací

RAM® X-Grip® phone holder with adapter for RAM® EZ-ON/OFF™

The RAM® X-Grip® phone holder with adapter for RAM® EZ-ON/OFF™ is a universal smartphone holder for the EZ-On/Off system.The X-Grip clamps around virtually any smartphone with spring arms, while the EZ-On/Off adapter allows quick mounting and removal. Ideal for mobile use and for use in vehicles and material handling.X-Grip® universal phone holderWith EZ-On/Off™ adapterFor vehicles and material handlingOriginal RAM Mounts part.

52,74 €*incl. VAT

43,59 €excl. VAT

Více informací

RAM® X-Grip® phone holder with adhesive Flex base

The RAP-B-378-UN7U consists of the adhesive Flex base with 1" ball, double socket arm and universal X-Grip® holder. Using a PSA adhesive strip, you can place the adhesive Flex holder virtually anywhere you want to keep your portable electronics clearly visible and always within reach. Thanks to its very small footprint, it easily finds a spot on your scooter, motorcycle, kayak, boat or dashboard. The holder is designed with a patented RAM rubber ball-and-socket system of 1" diameter with adjustment points at both ends of the double socket arm; this allows virtually infinite adjustment and perfect viewing angles. The supplied X-Grip® holder has a sleek and clever four-legged design that provides great holding power without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts, allowing a perfect custom fit for your mobile phone. The X-Grip® includes a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to verify the dimensions of your handheld device including case/sleeve/skin when determining the overall size.

97,39 €*incl. VAT

80,49 €excl. VAT

Více informací

RAM® X-Grip® phone holder with adhesive Flex base

The RAP-B-378-A-UN7U consists of the adhesive Flex base with 1" ball, SHORT double socket arm and universal X-Grip® holder. Using a PSA adhesive strip, you can place the adhesive Flex holder virtually anywhere you want to keep your portable electronics clearly visible and always within reach. Thanks to its very small footprint, it easily finds a spot on your scooter, motorcycle, kayak, boat or dashboard. The holder is designed with a patented RAM rubber ball-and-socket system of 1" diameter with adjustment points at both ends of the double socket arm; this allows virtually infinite adjustment and perfect viewing angles. The supplied X-Grip® holder has a sleek and clever four-legged design that provides great holding power without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts, allowing a perfect custom fit for your mobile phone.

100,72 €*incl. VAT

83,24 €excl. VAT

Více informací

RAM® X-Grip® phone holder with ATV/Side By Side rail base

The RAM® X-Grip® phone holder with ATV/Side By Side rail base (RAM-B-231-2-UN7U) comes with everything needed to mount a phone or small electronic device on rails with a diameter of 0.5" - 3.15". This kit consists of a steel clamp band base, stainless steel U-bolt base, medium length double socket arm and universal spring-loaded RAM® X-Grip® holder for mobile phones. The spring-loaded RAM® X-Grip® phone holder ensures a perfect fit for various phone models and small electronic devices from 1.87" to 3.25" wide by expanding and contracting the arms. The holder has four grip knobs that attach to the arms for a firm grip; also included is a rubber device tether that is recommended for outdoor & heavy-vibration applications. To ensure the fit within the RAM® X-Grip®, it is important to check the dimensions of the handheld device while it is in its case/sleeve/skin. The patented ball-and-socket system with adjustment points at both ends of the socket arm allows adjustment to the optimal viewing position.

120,64 €*incl. VAT

99,70 €excl. VAT

Více informací

RAM® X-Grip® phone holder with ball adapter for GoPro bases

The X-Grip® phone holder with GoPro® adapter lets you connect your phone at any location where you have a GoPro shoe mount. Swap out your GoPro with this phone holder to capture alternative camera footage, or use it for navigation if you have a GoPro shoe adhesive mount on your dashboard. This holder also connects to the RAM ROD® HD and RAM ROD® Jr rod holders to use your mobile fishfinder app while you are on the water. The X-Grip® includes a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to verify the dimensions of your handheld device including case/sleeve/skin when determining the overall size.

91,50 €*incl. VAT

75,62 €excl. VAT

Více informací

RAM® X-Grip® phone holder with ball and Vibe-Safe™ adapter

The RAM® X-Grip® phone holder with ball and RAM® Vibe-Safe™ adapter (RAM-HOL-UN7B-462) is a combination of the classic RAM® X-Grip® device holder and the RAM® Vibe-Safe™ — our vibration-dampening accessory designed to protect electronic devices against a wide range of vibration frequencies. The RAM® X-Grip® can rotate between portrait and landscape by loosening the central screw. It is compatible with B-size RAM® components, making it easy to upgrade your current mounting solution. This product comes with an optional device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that fit within the dimensions listed below; it is important to check the dimensions of your handheld device with case/sleeve/skin when determining the overall size.

116,20 €*incl. VAT

96,03 €excl. VAT

Více informací

RAM® X-Grip® phone holder with brake/clutch reservoir base – medium

The RAM-B-174-UN7U consists of hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25", a double socket arm and universal X-Grip® holder for mobile phones. Integrated into the holder is a patented system with a 1" diameter rubber ball and socket, with adjustment points at both ends of the socket arm; with a turn of the arm knob you can move the X-Grip® holder to your optimal viewing position. The hardware for brake/clutch reservoirs includes both standard and metric mounting bolts. The supplied X-Grip® holder has a sleek and clever four-legged design with a strong grip, without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts, giving your mobile phone a perfect custom fit. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved phone holder. The X-Grip® comes with a device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.

121,27 €*incl. VAT

100,22 €excl. VAT

Více informací

RAM® X-Grip® phone holder with brake/clutch reservoir base – short

The RAM-B-174-A-UN7 consists of mounting hardware for mounting on both brake/clutch reservoirs and rails with a diameter of 0.5" to 1.25", short-length double socket arm and universal X-Grip® holder for mobile phones. A patented system with a 1" diameter rubber ball and socket is integrated into the holder, with adjustment points at both ends of the socket arm; with a twist of the arm knob, you can move the X-Grip® holder to your optimal viewing position. The brake/clutch reservoir mounting hardware includes both standard and metric mounting bolts. The included X-Grip® holder has a sleek and smart four-legged design with a strong grip, without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts, giving your mobile phone a perfect custom fit. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved phone holder. The X-Grip® comes with a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.

118,46 €*incl. VAT

97,90 €excl. VAT

Více informací

RAM® X-Grip® phone holder with composite double socket arm

The popular spring-loaded RAM® X-Grip® phone holder features an 'X' design that expands and contracts for a perfect fit for your device - even when it is in a case. Made from high-strength composite and stainless steel, the RAM® X-Grip® phone holder is compatible with a wide range of RAM® double socket arms and mounting bases. This version of the RAM® X-Grip® fits phones with a width of 1.87" to 3.25" and keeps your device fully functional and accessible, and this kit includes a B size double socket arm of medium length. Whatever mounting base you combine the RAM® X-Grip® and double socket arm with, the RAM® ball and socket technology allows virtually infinite adjustability to achieve the ideal viewing angle - while it also extends the life of your phone by providing shock and vibration damping. For outdoor applications - such as use as a phone holder on the motorcycle - the RAM® X-Grip® includes a device tether that is recommended for extra safety and peace of mind.

74,04 €*incl. VAT

61,19 €excl. VAT

Více informací

RAM® X-Grip® phone holder with diamond base

The RAM-B-102-UN7U consists of a diamond base, a double socket arm and a universal spring-loaded X-Grip® holder for mobile phones. The mount incorporates a patented 1" diameter rubber ball-and-socket system with adjustment points at both ends of the socket arm; with a twist of the arm knob you can position the X-Grip® holder into your optimal viewing position. The 2.43" x 1.31" diamond base has two holes 1.912" on center and matches the industry standard AMPS hole pattern. The included X-Grip® holder has a sleek and smart four-legged design with strong gripping power without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts for a perfect custom fit to your mobile phone. The perfect complement to the modern, sleek interior of today's vehicles: the RAM X-Grip® is the evolved phone holder. The X-Grip® includes a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device with case/sleeve/skin when determining the overall size.

99,84 €*incl. VAT

82,51 €excl. VAT

Více informací

RAM® X-Grip® phone holder with double U-bolt base

The RAM® X-Grip® phone holder with double U-bolt base is a universal smartphone holder for tube mounting.The X-Grip clamps around virtually any smartphone with spring arms, while the double U-bolt base allows attachment around tubes and bars. Ideal for mounting a phone securely in vehicles and material handling.X-Grip® universal phone holderWith double U-bolt base for tube mountingFor vehicles and material handlingOriginal RAM Mounts part.

112,60 €*incl. VAT

93,06 €excl. VAT

Více informací

RAM® X-Grip® phone holder with flat-surface mount

The RAM-138-UN7U consists of a round flat plate, a double socket arm and a universal X-Grip® holder. The holder is designed with a patented 1.5" diameter RAM rubber ball-and-socket system, with adjustment points at both ends of the double socket arm; this allows virtually infinite adjustment and perfect viewing angles. The included X-Grip® holder has a sleek, smart four-legged design that provides a strong grip without hiding your phone behind foam-rubber pads and plastic. The spring-loaded X-Grip® holder expands and contracts, allowing your mobile phone to fit perfectly. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved phone holder.

137,89 €*incl. VAT

113,96 €excl. VAT

Více informací

RAM® X-Grip® phone holder with Glare Shield clamp base

The RAM-B-177-UN7U consists of a glare shield clamp base, short double socket arm and universal spring-loaded X-Grip® holder for mobile phones. Simply place the clamp on any clamping surface up to 5/8" thick and gently tighten the nylon thumb screws. The mount is equipped with the patented RAM system featuring a 1" diameter rubber ball and socket, with adjustment points at both ends of the double socket arm; this allows for virtually infinite adjustability and perfect viewing angles. The supplied X-Grip® holder has a sleek and clever four-legged design with a strong grip, without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts, giving your mobile phone a perfect custom fit. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved phone holder. The X-Grip® comes with a device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.

125,83 €*incl. VAT

103,99 €excl. VAT

Více informací

RAM® X-Grip® Phone Holder with Grab Handle and A-Style M6 Bolt Base

The RAM® X-Grip® phone holder with grab handle and A-style M6 bolt base (RAM-B-186-M6-UN7U) installs easily on any vehicle grab handle with an M6 screw bolt. This solution includes a medium-length double socket arm, the popular spring-loaded RAM® X-Grip® phone holder and a RAM® ball base. With a hollow core, you can pass the 6mm bolt or smaller through it to screw it into your vehicle grab handle for a stable mounting base without any drilling required. Keep your windshield clear and your phone holder out of the way with this grab handle holder for phones, GPS devices and more! Confirmed fit for this product includes the Toyota Tundra and all Ford Bronco models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage and Raptor — however, any vehicle that uses a 6mm bolt or smaller in its structure is compatible with this product. A smaller bolt can be used, though the load capacity decreases with bolt size.

102,73 €*incl. VAT

84,90 €excl. VAT

Více informací

RAM® X-Grip® phone holder with handlebar U-bolt base – medium

The RAM-B-149Z-UN7U consists of a zinc-coated U-bolt base, double socket arm and universal X-Grip® holder. This package comes with mounting hardware for rails with a diameter of 0.50" to 1.25". The base includes black end caps that fit over the exposed ends of the U-bolt. The holder is equipped with the patented RAM system with a rubber ball and socket of 1" diameter, with adjustment points at both ends of the double socket arm; this provides virtually infinite adjustability and perfect viewing angles. The supplied composite rail adapter can narrow the rail to a minimum width of 0.5". The supplied X-Grip® holder has a sleek and clever four-leg design with a strong grip, without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® holder expands and contracts, so your mobile phone fits perfectly. As the perfect complement to the modern, sleek interior of today's vehicles, the RAM X-Grip® is the evolved phone holder. The X-Grip® comes with a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.

108,78 €*incl. VAT

89,90 €excl. VAT

Více informací

RAM® X-Grip® phone holder with handlebar U-bolt base – short

Ideal for handlebars, the RAM-B-149Z-UN7U consists of a galvanised U-bolt base, a medium-length double socket arm and the popular spring-loaded RAM® X-Grip® phone holder. In addition, hardware is included suitable for rails with a diameter from .5" to 1.25". The RAM® X-Grip® has an 'X' design that expands and contracts for a perfect fit of your device, even with a case. Made from powder-coated, marine-grade aluminium, stainless steel components and high-strength composite, this version of the RAM® X-Grip® fits phones with a width from 1.87" to 3.25" and keeps your device fully functional and accessible. The RAM® ball-and-socket technology allows virtually infinite adjustability to achieve the ideal viewing angle while extending the lifespan of your phone through shock and vibration dampening. For outdoor use, the RAM® X-Grip® includes a device tether that is recommended for extra security and peace of mind.

105,90 €*incl. VAT

87,52 €excl. VAT

Více informací

RAM® X-Grip® phone holder with large fuel tank base

The RAM fuel tank base is a compact way to get a unique perspective with your camera or to mount your electronic device in a quickly accessible spot. This powder-coated aluminium base mounts directly onto the original fuel tank of the listed compatible motorcycles. The hardware required to mount onto the filler opening is also included. The X-Grip® comes with a device tether cord, recommended for outdoor use. The holder is compatible with mobile devices that fit within the dimensions listed below. It is important to check the dimensions of your device including case/sleeve/skin when determining the overall size.

139,38 €*incl. VAT

115,19 €excl. VAT

Více informací

RAM® X-Grip® Phone Holder with Lil Buddy™ Adhesive Dashboard Mount

The RAP-SB-180-UN7U consists of the RAM Lil Buddy™ and the universal X-Grip® holder. Minimalist in design but incredibly handy is the RAM Lil Buddy™ mount. With an adhesive disc you can place the Lil Buddy™ virtually anywhere you want to keep your device clearly visible and always within reach. Thanks to its very compact design, it easily finds a spot on your dashboard or console. The spring-loaded X-Grip® holder expands and contracts, so your phone fits perfectly. The X-Grip® comes with a device tether that is recommended for outdoor use. The holder is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case/sleeve/skin when determining the overall size.

66,27 €*incl. VAT

54,77 €excl. VAT

Více informací

RAM® X-Grip® phone holder with low-profile cable tie handlebar base

The RAP-460Z-UN7U consists of a double strap base with RAM® Pin-Lock™ back and the popular spring-loaded RAM® X-Grip® phone holder, with an 'X' design that expands and contracts for a perfect fit of your device – even when it's in a case. Made of high-quality composite and stainless steel, the RAM® X-Grip® phone holder is compatible with a wide range of RAM® double socket arms and mounting bases. This version of the RAM® X-Grip® fits phones with a width of 1.87" to 3.25" and keeps your device fully functional and accessible. Adjust the cable ties for attachment to various rails, from a minimum of .5" in diameter. For outdoor applications – such as use as a bike phone holder – the RAM® X-Grip® includes a device tether that is recommended for extra security and peace of mind.

61,96 €*incl. VAT

51,21 €excl. VAT

Více informací

RAM® X-Grip® phone holder with low-profile medium Tough-Claw™

The RAM® X-Grip® phone holder with low-profile RAM® Tough-Claw™ (RAM-HOL-UN7-404-2U) consists of the medium RAM® Tough-Claw™ base and the universal RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The RAM® X-Grip® has an 'X' design that expands and contracts to secure your phone and comes with a device tether that is recommended for outdoor use. With the RAM® Tough-Claw™ base attached, you can easily mount the RAM® X-Grip® on round, square and irregularly shaped rails and bars with an outer diameter of 1" to 1.6". This kit is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device including case, sleeve or skin when determining the overall size.

113,09 €*incl. VAT

93,46 €excl. VAT

Více informací

RAM® X-Grip® phone holder with low-profile small Tough-Claw™

The RAM® X-Grip® phone holder with low-profile RAM® Tough-Claw™ (RAM-HOL-UN7-400-2U) consists of the small RAM® Tough-Claw™ base and the universal large RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The RAM® X-Grip® has an 'X' design that expands and contracts to secure your phone and includes a device tether that is recommended for outdoor applications. With the RAM® Tough-Claw™ base attached, you can easily mount the RAM® X-Grip® to round, square and irregularly shaped rails and bars with an outside diameter of .625" to 1.14". This set is compatible with handheld devices that fit within the dimensions listed below. It is important to check the dimensions of your handheld device with case, sleeve or skin when determining the overall size.

100,73 €*incl. VAT

83,25 €excl. VAT

Více informací

Zakoupení dílů RAM Mounts

Hledáte robustní a všestranné řešení upevnění elektroniky? Pak je RAM Mounts tou správnou volbou. Tato americká značka je známá svými chytrými, odolnými montážními systémy, které bezpečně udržují vaše elektronická zařízení na místě.

Potřebujete mít telefon, tablet, notebook, skener, kameru, rádio nebo GPS snadno dostupné ve vašem vysokozdvižném vozíku, stohovači nebo reachtrucku? RAM Mounts má řešení pro téměř každou situaci. JVD Parts nabízí širokou škálu dílů RAM Mounts. Podívejte se na nabídku výše a použijte vyhledávací pole nebo filtry pro rychlé nalezení správného produktu. Nejste si jisti výběrem? Rádi vám poskytneme osobní konzultaci.

Zeptejte se nás

Stručná historie RAM Mounts

RAM Mounts vznikly v roce 1990 jako součást National Products Inc. (NPI) v Seattlu, Washington (USA). Značka byla založena s jasným cílem: vytvářet inovativní, univerzální řešení pro upevnění, která fungují v jakémkoli prostředí. Jejich slogan zní “RAM opravuje vše, všude”. To, co začalo jako několik produktů, se rozrostlo do celosvětově dostupného sortimentu tisíců modulárních dílů.

Od začátku si RAM Mounts stanovilo vysoké cíle. Používají pouze kvalitní materiály, jako je hliník, nerezová ocel a odolný kompozit. Ty kombinují s jejich unikátním a patentovaným systémem kloubů. Díky důrazu na kvalitu a inovaci se značka během více než tří desetiletí stala lídrem na trhu.

Inovativní řešení, která dělají rozdíl

Patentovaný systém RAM Mounts je založen na elastomerové, protiskluzové gumové kouli. V kombinaci s dalšími díly tlumí nárazy a vibrace. Modulární design umožňuje nekonečné množství kombinací. Tak můžete vždy vytvořit dokonalé řešení montáže pro váš vysokozdvižný vozík, stohovač, reachtruck nebo jiné stroje pro interní dopravu.

Velikost koule RAM Mounts vybíráte podle zátěže a použití:

B-velikost 1” koule: průměr 2,5cm, nosnost do 1,5 kg
C-velikost 1,5” koule: průměr 3,8cm, nosnost do 2,5 kg
D-velikost 2,25” koule: průměr 5,7cm, nosnost do 3,5 kg
E-velikost 3,38” koule: průměr 8,59cm, nosnost do 9 kg

RAM Mounts tak nabízí řešení pro téměř vše, od vozidel a lodí po průmyslové pracoviště a mobilní aplikace. Existují specifické držáky pro telefony, tablety, GPS systémy, kamery a skenery, ale také univerzální systémy jako populární X-Grip® a Tab-Tite™. Každý produkt je navržen tak, aby vydržel dlouho, i v těch nejnáročnějších podmínkách.

RAM Mounts v interní dopravě

I v interní dopravě RAM Mounts dokazuje svou hodnotu. Vysokozdvižné vozíky, orderpickery, plošiny, to jsou místa, kde je pevné a bezpečné uchycení zařízení klíčové. RAM Mounts vyrábí odolné doky a držáky, které odolávají nárazům a jsou připraveny na intenzivní každodenní používání.

Držáky jsou pro zařízení všech tvarů a velikostí: tablety, ruční počítače, skenery a další. Ať už máte zařízení s nebo bez obalu, vždy existuje vhodné řešení RAM Mounts, které dokonale pasuje do vašeho pracovního prostředí. Udržujte tak své zařízení snadno dostupné a dobře chráněné.

JVD Parts, expert na díly RAM Mounts pro interní dopravu

JVD Parts je součástí rodinné firmy Joris Van Dijck. Máme více než 65 let zkušeností s prodejem, pronájmem a údržbou strojů pro interní dopravu.

Vždy široká nabídka a rychlé dodání díky více než 70.000 dílům na skladě
Jednoduché objednávání v naší uživatelsky přívětivé webové stránce s jasnými filtry
Odpověď na každou technickou otázku od našich zkušených techniků

Kombinujeme kvalitní nabídku RAM Mounts s naším vlastním servisem a odborností. To znamená, že nejen najdete správný díl. Jste si také jistí, že je to řešení pro vaše specifické výzvy.

Takže hledáte trvalá, flexibilní a spolehlivé řešení upevnění? Objednejte si jednoduše díly RAM Mounts online u JVD Parts a přesvědčte se sami o rozdílu.

header.navigation.allCategories

Filtr

Filtr

Držáky RAM

RAM® X-Grip® phone holder with 3/8"-16 threaded ball base

RAM® X-Grip® phone holder with 9mm angled bolt head adapter - composite

RAM® X-Grip® phone holder with 9mm angled bolt-head adapter

RAM® X-Grip® phone holder with adapter for RAM® EZ-ON/OFF™

RAM® X-Grip® phone holder with adhesive Flex base

RAM® X-Grip® phone holder with adhesive Flex base

RAM® X-Grip® phone holder with ATV/Side By Side rail base

RAM® X-Grip® phone holder with ball adapter for GoPro bases

RAM® X-Grip® phone holder with ball and Vibe-Safe™ adapter

RAM® X-Grip® phone holder with brake/clutch reservoir base – medium

RAM® X-Grip® phone holder with brake/clutch reservoir base – short

RAM® X-Grip® phone holder with composite double socket arm

RAM® X-Grip® phone holder with diamond base

RAM® X-Grip® phone holder with double U-bolt base

RAM® X-Grip® phone holder with flat-surface mount

RAM® X-Grip® phone holder with Glare Shield clamp base

RAM® X-Grip® Phone Holder with Grab Handle and A-Style M6 Bolt Base

RAM® X-Grip® phone holder with handlebar U-bolt base – medium

RAM® X-Grip® phone holder with handlebar U-bolt base – short

RAM® X-Grip® phone holder with large fuel tank base

RAM® X-Grip® Phone Holder with Lil Buddy™ Adhesive Dashboard Mount

RAM® X-Grip® phone holder with low-profile cable tie handlebar base

RAM® X-Grip® phone holder with low-profile medium Tough-Claw™

RAM® X-Grip® phone holder with low-profile small Tough-Claw™

Zakoupení dílů RAM Mounts

Stručná historie RAM Mounts

Inovativní řešení, která dělají rozdíl

RAM Mounts v interní dopravě

JVD Parts, expert na díly RAM Mounts pro interní dopravu