Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® Form-Fit holder for Getac E100, E100A & 840XT

RAM passive holder for the Getac E100 & Getac 840XT from Tablet Kiosk. The RAM-HOL-GET1U has the ability to be locked.

190,76 €*incl. VAT

157,65 €excl. VAT

Více informací

RAM® Form-Fit holder for Getac ZX10

The RAM® Form-Fit holder for Getac ZX10 (RAM-HOL-GE4U) is a holder with quick release that allows you to securely mount the device in a wide range of applications. Equip this passive holder with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the Standard & High capacity batteries and the Hard Carry Handle. Go one step further with the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases, to mount an additional device such as a phone or other handheld device.

229,91 €*incl. VAT

190,01 €excl. VAT

Více informací

RAM® Form-Fit holder for Getac ZX70 - NFC Extender-compatible

The RAM® Form-Fit holder for Getac ZX70 - NFC Extender-compatible (RAM-HOL-GE3NU) is a spring-loaded holder with quick release that allows you to securely mount the device in a wide range of applications. This holder is designed so that all ports of the device remain accessible for peripherals. This passive holder is compatible with two RAM® hardware chargers for power—RAM-GDS-CHARGE-V9U and RAM-GDS-CHARGE-V10U. It is also designed to support the RAM® NFC Extender accessory and is not compatible with the Getac Hand Strap & Kickstand. Go one step further with the included 2-hole side bracket, compatible with the RAM® 2-hole diamond base, to mount an additional device such as a phone or other handheld device

153,52 €*incl. VAT

126,88 €excl. VAT

Více informací

RAM® Form-Fit holder for Getac ZX70 - Temp Module-compatible

The RAM® Form-Fit holder for Getac ZX70 - Temp Module-compatible (RAM-HOL-GE3FU) is a spring-loaded holder with quick release that allows you to securely mount the device in a wide range of applications. This holder is designed so that all ports of the device remain accessible for peripherals. This passive holder is compatible with two RAM® hardware chargers for power—RAM-GDS-CHARGE-V9U and RAM-GDS-CHARGE-V10U. It is also designed to support the RAM® Temperature Module accessories, retaining compatibility with the Getac Rotating Hand Strap & Kickstand. Go one step further with the included 2-hole side bracket, compatible with the RAM® 2-hole diamond base, to mount an additional device such as a phone or other handheld device.

154,82 €*incl. VAT

127,95 €excl. VAT

Více informací

RAM® Form-Fit holder for Getac ZX80

The RAM® Form-Fit holder for Getac ZX80 (RAM-HOL-GE5U) is a quick-release holder that keeps the device secured across a wide range of applications. Upgrade this passive holder with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the standard and high-capacity batteries as well as the 2-Point shoulder strap. Take the solution a step further by using the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases for mounting an additional device such as a phone or other handheld device.

332,53 €*incl. VAT

274,82 €excl. VAT

Více informací

RAM® Form-Fit holder for Honeywell CT50, CT60 & CT60 XP

This spring-loaded holder with stylus clip lets you secure your Honeywell CT50, CT60 & CT60 XP. The holder is compatible with RAM® 2-hole AMPS pattern diamond bases that fit any RAM® ball-and-socket holder, for a wide range of mounting options (hardware included).

91,98 €*incl. VAT

76,02 €excl. VAT

Více informací

RAM® Form-Fit holder for Honeywell RT10 Tablet

The RAM® vehicle dock has a Form-Fit design specifically for the rugged Honeywell RT10 tablet, with cut-outs that leave all buttons and ports clear. The dock also allows the tablet's scan function to work through the cut-out at the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® 4-hole AMPS bases in C and D size and 75mm x 75mm VESA pattern bases for attaching a dual socket arm to complete your mounting solution. Go one step further with the built-in 2-hole mounting plate that is compatible with a RAM® 2-hole diamond base for mounting an additional device such as a phone or other handheld device. An included optional accessory bracket makes it possible to attach RAM® 2-hole diamond bases for device mounting and features a cable management system.

121,27 €*incl. VAT

100,22 €excl. VAT

Více informací

RAM® Form-Fit Holder for Honeywell ScanPal EDA10A

The RAM® Form-Fit holder for Honeywell ScanPal™ EDA10A (RAM-HOL-HON11U) has a form-fit design specific to the Honeywell ScanPal™ EDA10A tablet with the OEM protective boot. This holder features cutouts so that the camera, buttons and ports are fully accessible and the device retains its capabilities while docked, such as the scanning function and volume control. It is compatible with the OEM hand strap accessory and requires the protective boot to be installed for a secure fit. Take your solution one step further with a variety of compatible RAM® accessories, such as the RAM® NFC Extender and RAM® Vent-Temp™. This tablet holder features a 4-hole AMPS and 75mm x 75mm VESA pattern on the back as connection points for attaching a double socket arm to complete your mounting solution. Attach peripheral accessories or devices directly to the dock by mounting them on one of the two built-in 2-hole mounting locations, compatible with the RAM® 2-hole diamond base.

163,75 €*incl. VAT

135,33 €excl. VAT

Více informací

RAM® Form-Fit holder for iPad Pro 11" 1-4 Gen, Air 5 & 11" (M2, M3, M4)

The RAM® EZ-Roll'r™ holder for the iPad Pro 11” & Air 11 (M2, M3, M4) keeps your device in a Form-Fit holder while the full screen remains visible. Simply slide your iPad into the holder and roll the top clip over the device to secure it. The side buttons, camera and charging port remain conveniently free and accessible. This RAM® EZ-Roll'r™ holder also features three mounting points on the back to attach a RAM® round ball base. A mounting point on the side of the holder allows the Apple Pencil to be inserted and removed.

37,87 €*incl. VAT

31,30 €excl. VAT

Více informací

RAM® Form-Fit holder for iPhone 13 Pro, 14, 14 Pro, 15 & 16 with ball

This form-fit holder is specifically designed for the Apple iPhone 13, 13 Pro, 14, 14 Pro, 15 and 16. Designed for phones without a case, this holder offers one-handed docking and removal of your iPhone, and all buttons, cameras, ports and speakers remain clear and accessible. This holder includes a B-size RAM® diamond ball base to attach a double socket arm – compatible with a wide range of additional RAM® components.

23,26 €*incl. VAT

19,22 €excl. VAT

Více informací

RAM® Form-Fit holder for iPhone 14 Plus/Pro Max, 15 Plus & 16 Plus

This form-fit holder is specifically designed for the Apple iPhone 13 Pro Max, 14 Plus, 14 Pro Max, 15 Plus and 16 Plus. Designed for phones without a case, this holder offers one-handed docking and removal of your iPhone, and all buttons, cameras, ports and speakers remain clear and accessible. The 2-hole AMPS pattern on the back of the holder and the included mounting hardware allow a RAM® diamond ball base to be attached – compatible with a wide range of additional RAM® components.

16,56 €*incl. VAT

13,69 €excl. VAT

Více informací

RAM® Form-Fit holder for Lowrance AirMap 600C, Explorer, H20 + More

The RAM-HOL-LO3U consists of a high-strength composite holder with a hole pattern that allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this holder is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

18,68 €*incl. VAT

15,44 €excl. VAT

Více informací

RAM® Form-Fit holder for Lowrance XOG

The RAM-HOL-LO8U consists of a high-strength composite holder with a hole pattern that allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this holder is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

26,97 €*incl. VAT

22,29 €excl. VAT

Více informací

RAM® Form-Fit holder for Magellan ATV, Map, Marine, Outdoor + More

The RAM-HOL-MA3U consists of a high-strength composite holder with a hole pattern that allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this holder is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

29,43 €*incl. VAT

24,32 €excl. VAT

Více informací

RAM® form-fit holder for Magellan eXplorist 100, 300, 500, 600 + more

The RAM-HOL-MA5U consists of a high-quality composite holder with a hole pattern that allows it to be attached to any RAM components or holders with the universal AMPS hole pattern. This holder is compatible and interchangeable with a wide range of popular RAM mounting products and is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to RAM components or holders with the universal AMPS hole pattern.

19,20 €*incl. VAT

15,87 €excl. VAT

Více informací

RAM® Form-Fit holder for Magellan eXplorist 510, 610 & 710

The RAM-HOL-MA14U consists of a high-strength composite holder with a hole pattern that allows attachment to any RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this holder is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to any RAM components or holders with the universal AMPs hole pattern.

19,43 €*incl. VAT

16,06 €excl. VAT

Více informací

RAM® Form-Fit holder for Magellan eXplorist GC, 110, 310 & 350H

The RAM-HOL-MA15U consists of a high-strength composite holder with a hole pattern that allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this holder is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

18,77 €*incl. VAT

15,51 €excl. VAT

Více informací

RAM® Form-Fit holder for Magellan eXplorist XL

The RAM-HOL-MA6U consists of a high-strength composite holder with a hole pattern that allows attachment to any RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this holder is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to any RAM components or holders with the universal AMPs hole pattern.

16,56 €*incl. VAT

13,69 €excl. VAT

Více informací

RAM® Form-Fit holder for Magellan Gold, GPS, Marine, Platinum + More

The RAM-HOL-MA2U consists of a high-strength composite holder with a hole pattern that allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this holder is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

17,57 €*incl. VAT

14,52 €excl. VAT

Více informací

RAM® Form-Fit holder for Magellan MobileMapper 6, Triton 1500 & 2000

The RAM-HOL-MA10U consists of a high-strength composite holder with a hole pattern that allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this holder is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

16,58 €*incl. VAT

13,70 €excl. VAT

Více informací

RAM® form-fit holder for Panasonic FZ-S1 & FZ-L1

This RAM® vehicle dock has a form-fit design made specifically for the Panasonic FZ-S1 & FZ-L1, including cut-outs that leave all buttons and ports clear and easily accessible. This dock ensures the tablet's scan function works via the cut-out on the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® bases with 4-hole AMPS and 75mm x 75mm VESA pattern in C and D size for attaching a dual socket arm to complete your mounting solution.

142,91 €*incl. VAT

118,11 €excl. VAT

Více informací

RAM® Form-Fit holder for Somewear Global Hotspot

This form-fit holder is specially designed for the Somewear Global Hotspot. The 2-hole AMPS pattern on the back of the holder and the included mounting hardware make it possible to attach a RAM® diamond ball base – compatible with a wide range of additional RAM® components, so you can take your device anywhere. Made from high-quality composite and covered by a lifetime warranty.

27,44 €*incl. VAT

22,68 €excl. VAT

Více informací

RAM® Form-Fit holder for Somewear Global Hotspot with ball

This form-fit holder is specially designed for the Somewear Global Hotspot. This holder features a B-size RAM® diamond ball base to attach a double socket arm – compatible with a wide range of additional RAM® components, so you can take your device anywhere. Made from high-quality composite and covered by a lifetime warranty.

29,81 €*incl. VAT

24,64 €excl. VAT

Více informací

RAM® form-fit holder for TDS Nomad

The RAM-HOL-TD3U consists of a high-grade composite holder with a hole pattern that allows it to be attached to any RAM parts or holders with the universal AMPS hole pattern. This holder is compatible and interchangeable with a wide range of popular RAM mounting products and is ready to complement your mobile device and become the handiest accessory in your vehicle. Included is a set of four nuts and bolts to attach the holder to RAM parts or holders with the universal AMPS hole pattern.

26,75 €*incl. VAT

22,11 €excl. VAT

Více informací

header.navigation.allCategories

Filtr

Filtr

Montagecomponenten

RAM® Form-Fit holder for Getac E100, E100A & 840XT

RAM® Form-Fit holder for Getac ZX10

RAM® Form-Fit holder for Getac ZX70 - NFC Extender-compatible

RAM® Form-Fit holder for Getac ZX70 - Temp Module-compatible

RAM® Form-Fit holder for Getac ZX80

RAM® Form-Fit holder for Honeywell CT50, CT60 & CT60 XP

RAM® Form-Fit holder for Honeywell RT10 Tablet

RAM® Form-Fit Holder for Honeywell ScanPal EDA10A

RAM® Form-Fit holder for iPad Pro 11" 1-4 Gen, Air 5 & 11" (M2, M3, M4)

RAM® Form-Fit holder for iPhone 13 Pro, 14, 14 Pro, 15 & 16 with ball

RAM® Form-Fit holder for iPhone 14 Plus/Pro Max, 15 Plus & 16 Plus

RAM® Form-Fit holder for Lowrance AirMap 600C, Explorer, H20 + More

RAM® Form-Fit holder for Lowrance XOG

RAM® Form-Fit holder for Magellan ATV, Map, Marine, Outdoor + More

RAM® form-fit holder for Magellan eXplorist 100, 300, 500, 600 + more

RAM® Form-Fit holder for Magellan eXplorist 510, 610 & 710

RAM® Form-Fit holder for Magellan eXplorist GC, 110, 310 & 350H

RAM® Form-Fit holder for Magellan eXplorist XL

RAM® Form-Fit holder for Magellan Gold, GPS, Marine, Platinum + More

RAM® Form-Fit holder for Magellan MobileMapper 6, Triton 1500 & 2000

RAM® form-fit holder for Panasonic FZ-S1 & FZ-L1

RAM® Form-Fit holder for Somewear Global Hotspot

RAM® Form-Fit holder for Somewear Global Hotspot with ball

RAM® form-fit holder for TDS Nomad