Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® Form-Fit lockable holder for Getac ZX70 - compatible with NFC Extender

RAM® Form-Fit lockable holder for Getac ZX70 - compatible with NFC Extender

The RAM® Form-Fit lockable holder for Getac ZX70 - compatible with NFC Extender (RAM-HOL-GE3NKLU) is a spring-loaded, quick-release holder that allows you to keep the device secured in a wide range of applications. This holder is designed to ensure that all ports on the device are accessible for peripheral support. This passive holder is compatible with two RAM® hardware chargers to enable power—RAM-GDS-CHARGE-V9U and RAM-GDS-CHARGE-V10U. It is also designed to support the RAM® NFC Extender accessory and is not compatible with the Getac Hand Strap & Kickstand. Go one step further by using the included 2-hole side bracket, compatible with the RAM® 2-hole diamond base, to mount an additional device such as a phone or other handheld device

203,61 €*incl. VAT

168,27 €excl. VAT

Více informací

RAM® Form-Fit lockable holder for Getac ZX70 - compatible with temperature module

RAM® Form-Fit lockable holder for Getac ZX70 - compatible with temperature module

The RAM® Form-Fit lockable holder for Getac ZX70 - compatible with temperature module (RAM-HOL-GE3FKLU) is a spring-loaded, quick-release holder that allows you to keep the device secured in a wide range of applications. This holder is designed to ensure that all ports on the device are accessible for peripheral support. This passive holder is compatible with two RAM® hardware chargers to enable power—RAM-GDS-CHARGE-V9U and RAM-GDS-CHARGE-V10U. It is also designed to support the RAM® temperature module accessories while retaining compatibility with the Getac Rotating Hand Strap & Kickstand. Go one step further by using the included 2-hole side bracket, compatible with the RAM® 2-hole diamond base, to mount an additional device such as a phone or other handheld device.

204,90 €*incl. VAT

169,34 €excl. VAT

Více informací

RAM® Form-Fit lockable holder for Getac ZX80

RAM® Form-Fit lockable holder for Getac ZX80

The RAM® Form-Fit lockable holder for Getac ZX80 (RAM-HOL-GE5KLU) is a quick-release holder that keeps the device secured across a wide range of applications. Upgrade this passive holder with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the standard and high-capacity batteries as well as the 2-Point shoulder strap. Take the solution a step further by using the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases for mounting an additional device such as a phone or other handheld device.

334,27 €*incl. VAT

276,26 €excl. VAT

Více informací

RAM® Form-Fit lockable powered dock for Getac ZX10

RAM® Form-Fit lockable powered dock for Getac ZX10

With the RAM® Form-Fit lockable powered dock for Getac ZX10 (RAM-HOL-GE4PKLU) you can mount the device and keep it charged via the pogo pin contacts while docked—power is delivered by connecting to the 5.5mm DC power connector of the dock. Equip it with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the Standard & High capacity batteries and the Hard Carry Handle. Go one step further with the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases, to mount an additional device such as a phone or other handheld device. Includes a set of keys for locking.

361,16 €*incl. VAT

298,48 €excl. VAT

Více informací

RAM® Form-Fit lockable powered dock for Getac ZX80

RAM® Form-Fit lockable powered dock for Getac ZX80

The RAM® Form-Fit lockable powered dock for Getac ZX80 (RAM-HOL-GE5PKLU) lets you secure and keep the device charged through the pogo pin contacts while docked — power is supplied by connecting to the dock's 5.5mm DC power connector. Upgrade it with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the standard and high-capacity batteries as well as the 2-Point shoulder strap. Take the solution a step further by using the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases for mounting an additional device such as a phone or other handheld device.

451,77 €*incl. VAT

373,36 €excl. VAT

Více informací

RAM® Form-Fit locking holder for Garmin Dezl 570LMT & 580 LMT-S

RAM® Form-Fit locking holder for Garmin Dezl 570LMT & 580 LMT-S

The RAM-HOL-GA71LU is a high-strength composite locking housing for the Garmin dezl 570LMT. RAM has designed a Form-Fit holder that supports the device and protects it against vibration. We have also moulded a sun visor into the design to shield the screen. The hole pattern allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this locking housing is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

42,23 €*incl. VAT

34,90 €excl. VAT

Více informací

RAM® Form-Fit locking holder for Garmin nuvi 200W, 285WT & 465T + More

RAM® Form-Fit locking holder for Garmin nuvi 200W, 285WT & 465T + More

The RAM-HOL-GA25LU consists of a high-strength composite locking housing with a hole pattern that allows attachment to all RAM components or holders with the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounts products, this locking housing is ready to complement your GPS and become the handiest accessory in your vehicle. Included is a set of two nuts and bolts to attach the holder to all RAM components or holders with the universal AMPs hole pattern.

29,87 €*incl. VAT

24,69 €excl. VAT

Více informací

RAM® Form-Fit powered dock for Getac ZX10

RAM® Form-Fit powered dock for Getac ZX10

With the RAM® Form-Fit powered dock for Getac ZX10 (RAM-HOL-GE4PU) you can mount the device and keep it charged via the pogo pin contacts while docked—power is delivered by connecting to the 5.5mm DC power connector of the dock. Equip it with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the Standard & High capacity batteries and the Hard Carry Handle. Go one step further with the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases, to mount an additional device such as a phone or other handheld device.

321,35 €*incl. VAT

265,58 €excl. VAT

Více informací

RAM® Form-Fit powered dock for Getac ZX80

RAM® Form-Fit powered dock for Getac ZX80

The RAM® Form-Fit powered dock for Getac ZX80 (RAM-HOL-GE5PU) lets you secure and keep the device charged through the pogo pin contacts while docked — power is supplied by connecting to the dock's 5.5mm DC power connector. Upgrade it with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the standard and high-capacity batteries as well as the 2-Point shoulder strap. Take the solution a step further by using the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases for mounting an additional device such as a phone or other handheld device.

385,08 €*incl. VAT

318,25 €excl. VAT

Více informací

RAM® Form-Fit powered dock for Honeywell CT50, CT60 & CT60 XP

RAM® Form-Fit powered dock for Honeywell CT50, CT60 & CT60 XP

This spring-loaded holder with stylus holder lets you secure your Honeywell CT50, CT60 & CT60 XP. The holder is compatible with RAM® 2-hole AMPS pattern diamond bases that fit any RAM® ball-and-socket holder, for a wide range of mounting options (hardware included). For charging, the holder includes a 1.25 metre USB Type-A Male cable; compatible with the RAM-GDS-CHARGE-V7BU and other charging accessories (see the Complete Your Solution tab).

141,24 €*incl. VAT

116,73 €excl. VAT

Více informací

RAM® Form-Fit powered dock for Zebra TC22 & TC27 with Boot

RAM® Form-Fit powered dock for Zebra TC22 & TC27 with Boot

This spring-loaded form-fit powered dock (RAM-HOL-ZE24PU) lets you mount the Zebra TC22 and TC27 handheld computer with the Rugged Boot. Power to the device is provided via a 1.2m long USB Type-A connector and pogo pin docking pins. This dock includes an integrated stylus holder that clicks your stylus into place when not in use, and accommodates the Zebra hand strap and the extended battery pack. Complete your solution by adding a compatible RAM® 2-hole AMPS pattern diamond base and a B- or C-size ball mount, for a wide range of mounting options (hardware included).

141,81 €*incl. VAT

117,20 €excl. VAT

Více informací

RAM® Form-Fit powered dock for Zebra TC22 & TC27 without Boot

RAM® Form-Fit powered dock for Zebra TC22 & TC27 without Boot

This spring-loaded form-fit powered dock (RAM-HOL-ZE24P-1U) lets you mount the Zebra TC22 and TC27 handheld computer without the Rugged Boot. This dock includes top and bottom spacers for a form-fit when docking the device without the Rugged Frame. Power to the device is provided via a 1.2m long USB Type-A connector and pogo pin docking pins. This dock includes an integrated stylus holder that clicks your stylus into place when not in use, and accommodates the Zebra hand strap. Complete your solution by adding a compatible RAM® 2-hole AMPS pattern diamond base and a B- or C-size ball mount, for a wide range of mounting options (hardware included).

152,39 €*incl. VAT

125,94 €excl. VAT

Více informací

RAM® Form-Fit powered dock for Zebra TC70, 72, 75 & 77

RAM® Form-Fit powered dock for Zebra TC70, 72, 75 & 77

The RAM® Form-Fit powered dock for Zebra TC70, 72, 75 & 77 (RAM-HOL-ZE7-2U) is a spring-loaded holder with stylus holder that allows you to mount your Zebra TC70, TC72, TC75 or TC77 with or without the Zebra Handstrap accessory. The holder is compatible with RAM® diamond bases with two-hole AMPS pattern that fit B- and C-size ball holders, allowing a wide range of mounting options (hardware included). Compatible charging options for this holder include the RAM-GDS-CHARGE-V7BU for hardwire applications or the RAM-POW-CIG-M55 cigarette charger.

139,66 €*incl. VAT

115,42 €excl. VAT

Více informací

RAM® Form-Fit powered dock with combination lock for Honeywell CT50 & CT60

RAM® Form-Fit powered dock with combination lock for Honeywell CT50 & CT60

This spring-loaded holder with combination lock and stylus holder lets you secure your Honeywell CT50, CT60 & CT60 XP. You lock it by inserting the device and pushing the lock inward. The holder is compatible with RAM® 2-hole AMPS pattern diamond bases that fit any RAM® ball-and-socket holder, for a wide range of mounting options (hardware included). For charging, the holder includes a 1.25 metre USB Type-A Male cable; compatible with the RAM-GDS-CHARGE-V7BU and other charging accessories (see the Complete Your Solution tab).

182,95 €*incl. VAT

151,20 €excl. VAT

Více informací

RAM® Form-Fit powered dock with key lock for Honeywell CT50, CT60 Series

RAM® Form-Fit powered dock with key lock for Honeywell CT50, CT60 Series

This spring-loaded holder with key lock and stylus holder lets you secure your Honeywell CT50, CT60 & CT60 XP. You lock it by inserting the device and pressing the button. The holder is compatible with RAM® 2-hole AMPS pattern diamond bases that fit any RAM® ball-and-socket holder, for a wide range of mounting options (hardware included). For charging, the holder includes a 1.25 metre USB Type-A Male cable; compatible with the RAM-GDS-CHARGE-V7BU and other charging accessories (see the Complete Your Solution tab).

195,86 €*incl. VAT

161,87 €excl. VAT

Více informací

RAM® Form-Fit printer holder for Brother PocketJet Series

RAM® Form-Fit printer holder for Brother PocketJet Series

The RAM-VPR-101 is designed to hold Brother® PocketJet® Series portable printers, as well as the Printek Interceptor 80 Series. The custom-fit housing is form-stable, has no sharp edges and adds little to the overall size of the printer. Key features include full visibility of the LEDs, a viewing hole to check the paper level and a caddy to store pens, mobile phone, paper clips, glasses and other handy items. Complete kits are available as a stand-alone system, or integrate one with your existing RAM products.

100,55 €*incl. VAT

83,10 €excl. VAT

Více informací

RAM® form-fit USB-C dock for Zebra TC22 & TC27 with Boot

RAM® form-fit USB-C dock for Zebra TC22 & TC27 with Boot

The RAM® form-fit USB-C dock for Zebra TC22 & TC27 with Boot (RAM-HOL-ZE24-CU) is a rugged dock that meets and exceeds the demands of modern workflows, with a USB-C connection tested for more than 250,000 cycles. The spring-loaded design of this dock allows quick one-handed insertion or removal of your device, while the precise design of the dock housing minimises human error and port damage when docking the device onto the USB-C male connector. The rear cavity of the dock accommodates ergonomic accessories attached to the back of the device. An integrated cut-out on the top provides the ability to operate buttons, ports and scanner without removing the device from the dock. Complete the solution by building your holder—this holder is RAM® Compatible™ with a 2-hole AMPS pattern for adding a diamond ball adapter.

298,34 €*incl. VAT

246,56 €excl. VAT

Více informací

RAM® form-fit USB-C dock for Zebra TC22 & TC27 without Boot

RAM® form-fit USB-C dock for Zebra TC22 & TC27 without Boot

The RAM® form-fit USB-C dock for Zebra TC22 & TC27 without Boot (RAM-HOL-ZE24-C-1U) is a rugged dock that meets and exceeds the demands of modern workflows, with a USB-C connection tested for more than 250,000 cycles. The spring-loaded design of this dock allows quick one-handed insertion or removal of your device, while the precise design of the dock housing minimises human error and port damage when docking the device onto the USB-C male connector. The rear cavity of the dock accommodates ergonomic accessories attached to the back of the device. An integrated cut-out on the top provides the ability to operate buttons, ports and scanner without removing the device from the dock. Complete the solution by building your holder—this holder is RAM® Compatible™ with a 2-hole AMPS pattern for adding a diamond ball adapter.

316,95 €*incl. VAT

261,94 €excl. VAT

Více informací

RAM® Glare Shield clamp ball base

RAM® Glare Shield clamp ball base

The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include the side window edge of a car or the glare shield of an aircraft. The base has two composite bolts that, when tightened, clamp the base onto the lip surface. A 1" diameter RAM rubber ball is connected to the base, allowing you to attach a 1" diameter RAM arm socket and connecting plates to create the perfect mount for your application.

50,52 €*incl. VAT

41,75 €excl. VAT

Více informací

RAM® Glare Shield clamp ball base with stainless steel screws

RAM® Glare Shield clamp ball base with stainless steel screws

The RAM® Glare Shield clamp ball base with stainless steel screws (art. RAM-B-259NKU) is a mounting component from the modular RAM® Mounts system for securely attaching equipment in vehicles, forklifts and material handling.The clamp grips around a tube, edge or bar and forms a movable mounting point in the RAM® system, quickly attached without tools or drilling.Part of the RAM® ball-and-socket systemFor vehicles, forklifts and material handlingAlso known under reference: RAM-B-259NKUOriginal RAM® Mounts part.

48,48 €*incl. VAT

40,07 €excl. VAT

Více informací

RAM® grab handle & A-style M6 bolt replacement kit with ball base

RAM® grab handle & A-style M6 bolt replacement kit with ball base

The RAM® grab handle & A-style bolt adapter base is the ideal base for installing RAM® Mounts on any vehicle grab handle with an M6 threaded bolt. With a hollow core, you can pass the 6mm bolt or smaller through to screw into your vehicle grab handle for a stable mounting base without any drilling required. Keep your windscreen clear and your phone mount out of the way with this grab handle mount for phones, GPS devices, GoPro® cameras and more! Confirmed fitment for this product includes the Toyota Tundra, Ford F-150 and all Ford Bronco models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage and Raptor—but any vehicle that uses a 6mm bolt or smaller in its structure is compatible with this product. A smaller bolt can be used, although the load capacity decreases with the bolt size.

27,22 €*incl. VAT

22,50 €excl. VAT

Více informací

RAM® half rail clamp ball base for 1"-1.25" rails

RAM® half rail clamp ball base for 1"-1.25" rails

The RAM-220U is a half rail clamp base with a 1.5" rubber ball that fits rails with a diameter of 1" to 1.25".

61,67 €*incl. VAT

50,97 €excl. VAT

Více informací

RAM® halves of double socket arm without bolt, knob or spring

RAM® halves of double socket arm without bolt, knob or spring

The RAM-B-201U-WD1, standard double socket arm without bolt, knob or spring, has a socket at each end that fits 1" ball bases. This socket technology provides virtually infinite adjustment and perfect viewing angles.

24,37 €*incl. VAT

20,14 €excl. VAT

Více informací

RAM® Hand-Track™ Center Connector with 10" Track Extension

RAM® Hand-Track™ Center Connector with 10" Track Extension

Combine multiple tracks with the RAM® Hand-Track™ with Center Connector set. Included are one Hand-Track and one top-loading Center Connector, with the Center Connector adding 1.6” of length. Install with a 1/4”-20 machine screw or #14 self-tapping screw. Hardware not included.

47,02 €*incl. VAT

38,86 €excl. VAT

Více informací