Montagecomponenten

The RAM® power + data dock for Getac ZX80 (RAM-HOL-GE5PDU) lets you lock the device and keep it charged via the pogo pin contacts while it is docked — power is delivered by connecting to the dock's 5.5mm DC power jack. Add a peripheral with the built-in USB Type-A cable and connect a keyboard, barcode scanner, printer and more. Upgrade with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the standard and high-capacity batteries as well as the 2-Point shoulder strap. Take the solution one step further by using the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases for mounting an additional device such as a phone or other handheld device.

The RAM® vehicle dock for the rugged Honeywell RT10 tablet lets you connect one desired peripheral while the device stays charged via the pogo pin contacts when docked. Power is supplied through the dock's 5.5mm DC power connector, while peripheral support is provided by the built-in USB Type-A cable. The dock also allows the tablet's scan function to work through the cut-out at the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® 4-hole AMPS bases in C and D size and 75mm x 75mm VESA pattern bases for attaching a dual socket arm to complete your mounting solution. Go one step further with the built-in 2-hole mounting plate that is compatible with a RAM® 2-hole diamond base for mounting an additional device such as a phone or other handheld device. An included optional accessory bracket makes it possible to attach RAM® 2-hole diamond bases for device mounting and features a cable management system.

The RAM® power + data dock for Honeywell ScanPal™ EDA10A (RAM-HOL-HON11PDU) has a form-fit design specific to the Honeywell ScanPal™ EDA10A tablet with the OEM protective boot. This powered holder keeps the device charged via the pogo pin contacts when the device is docked — power is delivered by connecting to the dock's 5.5mm DC power jack. Peripheral support is provided by the built-in USB Type-A cable. It is compatible with the OEM hand strap accessory and requires the protective boot to be installed for a secure fit. Take your solution one step further with a variety of compatible RAM® accessories, such as the RAM® NFC Extender and RAM® Vent-Temp™. This tablet holder features a 4-hole AMPS and 75mm x 75mm VESA pattern on the back as connection points for attaching a double socket arm to complete your mounting solution. Attach peripheral accessories or devices directly to the dock by mounting them on one of the two built-in 2-hole mounting locations, compatible with the RAM® 2-hole diamond base.

With data and charging capabilities, the RAM® vehicle dock for the Panasonic FZ-S1 & FZ-L1 allows a desired peripheral to be connected while the device stays charged via the pogo pin contacts when docked. Power is supplied by connecting to the dock's 5.5mm DC power connector, while peripheral support is provided by the built-in USB Type-A cable. This dock has cut-outs that leave all buttons and ports clear and easily accessible, while the tablet's scan function works via the cut-out on the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® bases with 4-hole AMPS and 75mm x 75mm VESA pattern in C and D size for attaching a dual socket arm to complete your mounting solution.

This powered dock for the Samsung Tab Active3 enclosed in an OtterBox uniVERSE case is designed to meet the demands of field workers across a wide range of applications such as transport, field sales, logistics, manufacturing and much more. Power and data sync capabilities are supplied to the device via GDS® pogo pins, while you use this dock's USB-A port to support an additional peripheral, making this the ideal, compact mounting solution for your mobile workstation. This dock also includes an integrated OtterBox uniVERSE accessory holder on the back of the holder for any accessory with a uniVERSE module. Additional space on the back of the dock accommodates the GDS® Hand-Stand™ and shoulder strap accessories. Access to the stylus is maintained while the device is docked. Included is a set of four nuts and bolts to attach the dock to any RAM® components with the universal AMPS hole pattern. Also included are the USB-C female pigtail, cable clamp and cable ties.

This powered dock for the Samsung Tab Active5, Tab Active3 and 2 retains the same capabilities as the other RAM® EZ-Roll'r™ powered docks for the Tab Active5/3/2, with an additional dual speaker integrated into the bottom of the dock for amplified sound on the go. Power and data synchronization are supplied to the device via GDS® pogo pins, while you benefit from this holder's USB-A port to support an additional peripheral, making this the ideal, compact mounting solution for your mobile workstation. An additional cavity on the back of the dock provides space for the GDS® Hand-Stand™ and shoulder strap accessories. The stylus remains accessible while the device is docked. Included is a set of four nuts and bolts to attach the dock to RAM® components with the universal AMPS hole pattern.

This Power + Single USB Type-A RAM® Dock for the Zebra ET60 & ET65 (RAM-HOL-ZE25PDU) is equipped with our patented 3-D Float™ docking connector. Charging is provided via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A single USB Type-A pigtail connector is provided for adding one additional peripheral device. Unique to this dock are the new self-aligning docking pads that surround the pogo pins and conform to the tablet when it is seated in the dock, for optimal contact and to prevent damage to the pins. Built for versatility in the field, this dock supports the device with or without the attachable Zebra keyboard and features a unique 2-in-1 lock that both secures the tablet and allows the keyboard to open and close independently. In addition, this dock is accessory-ready, compatible with the RAM® Vent-Temp™, RAM® Temp-Right™, RAM® NFC Extender, and two small device mounting zones on both the left and right sides of the dock. The ET6x is compatible with the Zebra hand strap and shoulder strap while seated in the RAM® dock. The cut-out on the left side of the dock provides easy access to the Zebra CAC reader with the ability to open and close the CAC reader cover. Complete the solution by building out your mount. These docks are RAM® Compatible™ and feature 75mm VESA or 4-hole AMPS patterns for adding a ball adapter. Take advantage of thousands of RAM® mounting components to build the perfect ET60/ET65 solution. These thoughtful features enable a mobile workforce across a wide range of industries, including field/utility services, public safety, construction and more.

This Power + Single USB Type-A RAM® Dock for the Zebra ET60 & ET65 (RAM-HOL-ZE25PDHU) is equipped with our patented 3-D Float™ docking connector. This dock features built-in heating elements that provide the necessary warmth to prevent the pogo pins from seizing up, allowing them to operate in wet and freezing environments. Charging is provided via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A single USB Type-A pigtail connector is provided for adding one additional peripheral device. Unique to this dock are the new self-aligning docking pads that surround the pogo pins and conform to the tablet when it is seated in the dock, for optimal contact and to prevent damage to the pins. Built for versatility in the field, this dock supports the device with or without the attachable Zebra keyboard and features a unique 2-in-1 lock that both secures the tablet and allows the keyboard to open and close independently. In addition, this dock is accessory-ready, compatible with the RAM® Vent-Temp™, RAM® Temp-Right™, RAM® NFC Extender, and two small device mounting zones on both the left and right sides of the dock. The ET6x is compatible with the Zebra hand strap and shoulder strap while seated in the RAM® dock. The cut-out on the left side of the dock provides easy access to the Zebra CAC reader with the ability to open and close the CAC reader cover. Complete the solution by building out your mount. These docks are RAM® Compatible™ and feature 75mm VESA or 4-hole AMPS patterns for adding a ball adapter. Take advantage of thousands of RAM® mounting components to build the perfect ET60/ET65 solution. These thoughtful features enable a mobile workforce across a wide range of industries in colder climates, including cold storage, fixed vehicle docking in commercial transport and utility services in sub-zero environments.

This non-locking RAM® Dock with power and data (RAM-HOL-ZE22PDU) has a form-fit design specifically for the Zebra ET8x tablets. Built for versatility in the field, this dock supports the device with or without the Rugged Frame and is compatible with the optional Friction Hinge Rugged Keyboard. Connect your desired peripheral while keeping the device charged via the pogo pin contacts when the device is docked. Power is supplied by connecting to the dock's 5.5mm DC power port, while peripheral support is provided by the built-in single USB Type-A cable. Thoughtfully designed, this dock also accommodates tablet expansions such as the Zebra Expansion Back, GDS® Roto-Mag™ and GDS® Hand-Stand™ ergonomic accessories. Brave the elements with options to expand your dock with temperature modules. The RAM® Temp-Right™ can be added to regulate heat in extremely cold environments, while the RAM® Vent-Temp™ uses the vehicle's A/C vents to direct warm or cold air to the ET8x. Go one step further by upgrading to an optional NFC Repeater module that extends the device's internal NFC reader. Combine this with the dock's built-in two-hole mounting plate, compatible with the RAM® two-hole diamond base, for mounting the NFC Repeater or another additional device such as a phone, scanner or printer.

This RAM® vehicle dock features a combination lock as theft prevention. The RAM® vehicle dock for the rugged Honeywell RT10 tablet lets you connect one desired peripheral while the device stays charged via the pogo pin contacts when docked. Power is supplied through the dock's 5.5mm DC power connector, while peripheral support is provided by the built-in USB Type-A cable. The dock also allows the tablet's scan function to work through the cut-out at the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® 4-hole AMPS bases in C and D size and 75mm x 75mm VESA pattern bases for attaching a dual socket arm to complete your mounting solution. Go one step further with the built-in 2-hole mounting plate that is compatible with a RAM® 2-hole diamond base for mounting an additional device such as a phone or other handheld device. An included optional accessory bracket makes it possible to attach RAM® 2-hole diamond bases for device mounting and features a cable management system.

This RAM® vehicle dock features a key lock for theft prevention. The RAM® vehicle dock for the rugged Honeywell RT10 tablet allows a desired peripheral to be connected while the device stays charged via the pogo pin contacts when docked. Power is supplied via the dock's 5.5mm DC power connector, while peripheral support is provided by the built-in USB Type-A cable. The dock also allows the tablet's scan function to work via the cut-out on the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® 4-hole AMPS bases in C and D size and 75mm x 75mm VESA pattern bases for attaching a dual socket arm to complete your mounting solution. Take it a step further with the built-in 2-hole mounting plate that is compatible with a RAM® 2-hole diamond base for mounting an additional device such as a phone or other handheld device. An included optional accessory bracket allows RAM® 2-hole diamond bases to be attached for device mounting and features a cable management system.

With data and charging capabilities and a key lock for theft prevention, the RAM® vehicle dock for the Panasonic FZ-S1 & FZ-L1 allows a desired peripheral to be connected while the device stays charged via the pogo pin contacts when docked. Power is supplied by connecting to the dock's 5.5mm DC power connector, while peripheral support is provided by the built-in USB Type-A cable. This dock has cut-outs that leave all buttons and ports clear and easily accessible, while the tablet's scan function works via the cut-out on the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® bases with 4-hole AMPS and 75mm x 75mm VESA pattern in C and D size for attaching a dual socket arm to complete your mounting solution.

This key-lockable Power + Single USB Type-A RAM® Dock for the Zebra ET60 & ET65 (RAM-HOL-ZE25PDLU) is equipped with our patented 3-D Float™ docking connector. Charging is provided via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A single USB Type-A pigtail connector is provided for adding one additional peripheral device. Unique to this dock are the new self-aligning docking pads that surround the pogo pins and conform to the tablet when it is seated in the dock, for optimal contact and to prevent damage to the pins. Built for versatility in the field, this dock supports the device with or without the attachable Zebra keyboard and features a unique 2-in-1 lock that both secures the tablet and allows the keyboard to open and close independently. In addition, this dock is accessory-ready, compatible with the RAM® Vent-Temp™, RAM® Temp-Right™, RAM® NFC Extender, and two small device mounting zones on both the left and right sides of the dock. The ET6x is compatible with the Zebra hand strap and shoulder strap while seated in the RAM® dock. The cut-out on the left side of the dock provides easy access to the Zebra CAC reader with the ability to open and close the CAC reader cover. Complete the solution by building out your mount. These docks are RAM® Compatible™ and feature 75mm VESA or 4-hole AMPS patterns for adding a ball adapter. Take advantage of thousands of RAM® mounting components to build the perfect ET60/ET65 solution. These thoughtful features enable a mobile workforce across a wide range of industries, including field/utility services, public safety, construction and more.

This key-lockable Power + Single USB Type-A RAM® Dock for the Zebra ET60 & ET65 (RAM-HOL-ZE25PDHLU) is equipped with our patented 3-D Float™ docking connector. This dock features built-in heating elements that provide the necessary warmth to prevent the pogo pins from seizing up, allowing them to operate in wet and freezing environments. Charging is provided via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A single USB Type-A pigtail connector is provided for adding one additional peripheral device. Unique to this dock are the new self-aligning docking pads that surround the pogo pins and conform to the tablet when it is seated in the dock, for optimal contact and to prevent damage to the pins. Built for versatility in the field, this dock supports the device with or without the attachable Zebra keyboard and features a unique 2-in-1 lock that both secures the tablet and allows the keyboard to open and close independently. In addition, this dock is accessory-ready, compatible with the RAM® Vent-Temp™, RAM® Temp-Right™, RAM® NFC Extender, and two small device mounting zones on both the left and right sides of the dock. The ET6x is compatible with the Zebra hand strap and shoulder strap while seated in the RAM® dock. The cut-out on the left side of the dock provides easy access to the Zebra CAC reader with the ability to open and close the CAC reader cover. Complete the solution by building out your mount. These docks are RAM® Compatible™ and feature 75mm VESA or 4-hole AMPS patterns for adding a ball adapter. Take advantage of thousands of RAM® mounting components to build the perfect ET60/ET65 solution. These thoughtful features enable a mobile workforce across a wide range of industries in colder climates, including cold storage, fixed vehicle docking in commercial transport and utility services in sub-zero environments.

This lockable RAM® Dock with power and data (RAM-HOL-ZE22PDLU) has a form-fit design specifically for the Zebra ET8x tablets. Built for versatility in the field, this dock supports the device with or without the Rugged Frame and is compatible with the optional Friction Hinge Rugged Keyboard. Connect your desired peripheral while keeping the device charged via the pogo pin contacts when the device is docked. Power is supplied by connecting to the dock's 5.5mm DC power port, while peripheral support is provided by the built-in single USB Type-A cable. Thoughtfully designed, this dock also accommodates tablet expansions such as the Zebra Expansion Back, GDS® Roto-Mag™ and GDS® Hand-Stand™ ergonomic accessories. Brave the elements with options to expand your dock with temperature modules. The RAM® Temp-Right™ can be added to regulate heat in extremely cold environments, while the RAM® Vent-Temp™ uses the vehicle's A/C vents to direct warm or cold air to the ET8x. Go one step further by upgrading to an optional NFC Repeater module that extends the device's internal NFC reader. Combine this with the dock's built-in two-hole mounting plate, compatible with the RAM® two-hole diamond base, for mounting the NFC Repeater or another additional device such as a phone, scanner or printer.

With the RAM® Power + Dual USB Data Dock for Getac ZX10 (RAM-HOL-GE4PD2U) you can mount the device and keep it charged via the pogo pin contacts while docked—power is delivered by connecting to the 5.5mm DC power connector of the dock. Add up to two peripherals with the built-in dual USB Type-A cord and connect a keyboard, barcode scanner, printer and more. Equip it with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the Standard & High capacity batteries and the Hard Carry Handle. Go one step further with the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases, to mount an additional device such as a phone or other handheld device.

The RAM® power + dual USB data dock for Getac ZX80 (RAM-HOL-GE5PD2U) lets you lock the device and keep it charged via the pogo pin contacts while it is docked — power is delivered by connecting to the dock's 5.5mm DC power jack. Add up to two peripherals with the built-in dual USB Type-A cable and connect a keyboard, barcode scanner, printer and more. Upgrade with any combination of compatible accessories, including the RAM® Temp-Right™, Vent-Temp™, RAM® NFC Extender and D-size VESA base. Additional compatibility for Getac accessories includes the standard and high-capacity batteries as well as the 2-Point shoulder strap. Take the solution one step further by using the included 2-hole side bracket, compatible with RAM® 2-hole diamond bases for mounting an additional device such as a phone or other handheld device.

This RAM® EZ-Roll'r™ powered holder for the Samsung Galaxy Tab Active5 Pro, Tab Active4 Pro and Tab Active Pro is designed to meet the demands of field workers in a variety of applications, including transport, outside sales, logistics, manufacturing and much more. Power and data synchronization are supplied to the device via GDS® pogo pins, while you benefit from this holder's dual USB-A port that supports up to two peripherals, making this the ideal, compact mounting solution for your mobile workstation. For security and theft prevention, this powered holder has a combination lock. The stylus remains accessible while the device is docked. Included is a set of four nuts and bolts to attach the holder to RAM® components with the universal 4-hole AMPS pattern. This holder also has space on the back for a GDS® Hand-Stand™ attachment so you can effortlessly take your Galaxy Tab Active5 Pro, Tab Active4 Pro and Tab Active Pro from your vehicle, to yourself, to your desk.

This RAM® EZ-Roll'r™ powered holder for the Samsung Galaxy Tab Active5 Pro, Tab Active4 Pro and Tab Active Pro is designed to meet the demands of field workers in a variety of applications, including transport, outside sales, logistics, manufacturing and much more. Power and data synchronization are supplied to the device via GDS® pogo pins, while you benefit from this holder's dual USB-A port that supports up to two peripherals, making this the ideal, compact mounting solution for your mobile workstation. For security and theft prevention, this powered holder has a key lock. The stylus remains accessible while the device is docked. Included is a set of four nuts and bolts to attach the holder to RAM® components with the universal 4-hole AMPS pattern. This holder also has space on the back for a GDS® Hand-Stand™ attachment so you can effortlessly take your Galaxy Tab Active5 Pro, Tab Active4 Pro or Tab Active Pro from your vehicle, to yourself, to your desk.

The RAM® vehicle dock for the rugged Honeywell RT10 tablet lets you connect up to two desired peripherals while the device stays charged via the pogo pin contacts when docked. Power is supplied through the dock's 5.5mm DC power connector, while peripheral support is provided by the built-in dual USB Type-A cable. The dock also allows the tablet's scan function to work through the cut-out at the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® 4-hole AMPS bases in C and D size and 75mm x 75mm VESA pattern bases for attaching a dual socket arm to complete your mounting solution. Go one step further with the built-in 2-hole mounting plate that is compatible with a RAM® 2-hole diamond base for mounting an additional device such as a phone or other handheld device. An included optional accessory bracket makes it possible to attach RAM® 2-hole diamond bases for device mounting and features a cable management system.

The RAM® power + dual USB dock for Honeywell ScanPal™ EDA10A (RAM-HOL-HON11PD2U) has a form-fit design specific to the Honeywell ScanPal™ EDA10A tablet with the OEM protective boot. This powered holder keeps the device charged via the pogo pin contacts when the device is docked — power is delivered by connecting to the dock's 5.5mm DC power jack. Peripheral support is provided by the built-in dual USB Type-A cable, allowing users to connect up to two input devices. It is compatible with the OEM hand strap accessory and requires the protective boot to be installed for a secure fit. Take your solution one step further with a variety of compatible RAM® accessories, such as the RAM® NFC Extender and RAM® Vent-Temp™. This tablet holder features a 4-hole AMPS and 75mm x 75mm VESA pattern on the back as connection points for attaching a double socket arm to complete your mounting solution. Attach peripheral accessories or devices directly to the dock by mounting them on one of the two built-in 2-hole mounting locations, compatible with the RAM® 2-hole diamond base.

This powered dock for the Samsung Tab Active3 in an OtterBox uniVERSE case is designed to meet the demands of field workers in a variety of applications, including transport, outside sales, logistics, manufacturing and much more. Power and data synchronization are supplied to the device via GDS® pogo pins, while you benefit from this dock's dual USB-A port to support up to two additional peripherals, making this the ideal, compact mounting solution for your mobile workstation. This dock also includes an integrated OtterBox uniVERSE accessory holder on the back of the holder for any accessory with a uniVERSE module. An additional cavity on the back of the dock provides space for the GDS® Hand-Stand™ and shoulder strap accessories. The stylus remains accessible while the device is docked. Included is a set of four nuts and bolts to attach the dock to RAM® components with the universal AMPS hole pattern. Also included are the mUSB female pigtail, GDS® USB 2.0 cable, cable clip and cable ties. Look at the RAM-GDS-CHARGE-V7BU hardwire charger or the RAM-GDS-CHARGE-USB2 CIG cigarette lighter charger for the power supply.

This powered dock for the Samsung Tab Active5, Tab Active3 and 2 retains the same capabilities as the other RAM® EZ-Roll'r™ powered docks for the Tab Active5/3/2, with an additional dual speaker integrated into the bottom of the dock for amplified sound on the go. Power and data synchronization are supplied to the device via GDS® pogo pins, while you benefit from this holder's dual USB-A port to support up to two additional peripherals, making this the ideal, compact mounting solution for your mobile workstation. An additional cavity on the back of the dock provides space for the GDS® Hand-Stand™ and shoulder strap accessories. The stylus remains accessible while the device is docked. Included is a set of four nuts and bolts to attach the dock to RAM® components with the universal AMPS hole pattern.

This Power + Dual USB Type-A RAM® Dock for the Zebra ET60 & ET65 (RAM-HOL-ZE25PD2U) is equipped with our patented 3-D Float™ docking connector. Charging is provided via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A dual USB Type-A pigtail connector is provided for adding up to two peripheral devices. Unique to this dock are the new self-aligning docking pads that surround the pogo pins and conform to the tablet when it is seated in the dock, for optimal contact and to prevent damage to the pins. Built for versatility in the field, this dock supports the device with or without the attachable Zebra keyboard and features a unique 2-in-1 lock that both secures the tablet and allows the keyboard to open and close independently. In addition, this dock is accessory-ready, compatible with the RAM® Vent-Temp™, RAM® Temp-Right™, RAM® NFC Extender, and two small device mounting zones on both the left and right sides of the dock. The ET6x is compatible with the Zebra hand strap and shoulder strap while seated in the RAM® dock. The cut-out on the left side of the dock provides easy access to the Zebra CAC reader with the ability to open and close the CAC reader cover. Complete the solution by building out your mount. These docks are RAM® Compatible™ and feature 75mm VESA or 4-hole AMPS patterns for adding a ball adapter. Take advantage of thousands of RAM® mounting components to build the perfect ET60/ET65 solution. These thoughtful features enable a mobile workforce across a wide range of industries, including field/utility services, public safety, construction and more.