Montagecomponenten

This Power + Dual USB Type-A RAM® Dock for the Zebra ET60 & ET65 (RAM-HOL-ZE25PD2HU) is equipped with our patented 3-D Float™ docking connector. This dock features built-in heating elements that provide the necessary warmth to prevent the pogo pins from seizing up, allowing them to operate in wet and freezing environments. Charging is provided via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A dual USB Type-A pigtail connector is provided for adding up to two peripheral devices. Unique to this dock are the new self-aligning docking pads that surround the pogo pins and conform to the tablet when it is seated in the dock, for optimal contact and to prevent damage to the pins. Built for versatility in the field, this dock supports the device with or without the attachable Zebra keyboard and features a unique 2-in-1 lock that both secures the tablet and allows the keyboard to open and close independently. In addition, this dock is accessory-ready, compatible with the RAM® Vent-Temp™, RAM® Temp-Right™, RAM® NFC Extender, and two small device mounting zones on both the left and right sides of the dock. The ET6x is compatible with the Zebra hand strap and shoulder strap while seated in the RAM® dock. The cut-out on the left side of the dock provides easy access to the Zebra CAC reader with the ability to open and close the CAC reader cover. Complete the solution by building out your mount. These docks are RAM® Compatible™ and feature 75mm VESA or 4-hole AMPS patterns for adding a ball adapter. Take advantage of thousands of RAM® mounting components to build the perfect ET60/ET65 solution. These thoughtful features enable a mobile workforce across a wide range of industries in colder climates, including cold storage, fixed vehicle docking in commercial transport and utility services in sub-zero environments.

This non-locking RAM® Dock with power and dual data (RAM-HOL-ZE22PD2U) has a form-fit design specifically for the Zebra ET8x tablets. Built for versatility in the field, this dock supports the device with or without the Rugged Frame and is compatible with the optional Friction Hinge Rugged Keyboard. Connect up to two desired peripherals while keeping the device charged via the pogo pin contacts when the device is docked. Power is supplied by connecting to the dock's 5.5mm DC power port, while peripheral support is provided by the built-in dual USB Type-A cable. Thoughtfully designed, this dock also accommodates tablet expansions such as the Zebra Expansion Back, GDS® Roto-Mag™ and GDS® Hand-Stand™ ergonomic accessories. Brave the elements with options to expand your dock with temperature modules. The RAM® Temp-Right™ can be added to regulate heat in extremely cold environments, while the RAM® Vent-Temp™ uses the vehicle's A/C vents to direct warm or cold air to the ET8x. Go one step further by upgrading to an optional NFC Repeater module that extends the device's internal NFC reader. Combine this with the dock's built-in two-hole mounting plate, compatible with the RAM® two-hole diamond base, for mounting the NFC Repeater or another additional device such as a phone, scanner or printer.

This RAM® vehicle dock features a combination lock as theft prevention. The RAM® vehicle dock for the rugged Honeywell RT10 tablet lets you connect up to two desired peripherals while the device stays charged via the pogo pin contacts when docked. Power is supplied through the dock's 5.5mm DC power connector, while peripheral support is provided by the built-in dual USB Type-A cable. The dock also allows the tablet's scan function to work through the cut-out at the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® 4-hole AMPS bases in C and D size and 75mm x 75mm VESA pattern bases for attaching a dual socket arm to complete your mounting solution. Go one step further with the built-in 2-hole mounting plate that is compatible with a RAM® 2-hole diamond base for mounting an additional device such as a phone or other handheld device. An included optional accessory bracket makes it possible to attach RAM® 2-hole diamond bases for device mounting and features a cable management system.

This RAM® EZ-Roll'r™ powered holder for the Samsung Tab Active5, Tab Active3 and 2 is designed to meet the demands of field workers in a variety of applications, including transport, outside sales, logistics, manufacturing and much more. Power and data synchronization are supplied to the device via GDS® pogo pins, while you benefit from this holder's dual USB-A port that supports up to two peripherals, making this the ideal, compact mounting solution for your mobile workstation. For security and theft prevention, this powered holder has a combination lock. The stylus remains accessible while the device is docked. Included is a set of four nuts and bolts to attach the holder to RAM® components in B or C size with the universal 4-hole AMPS pattern.

This RAM® vehicle dock features a key lock as theft prevention. The RAM® vehicle dock for the rugged Honeywell RT10 tablet lets you connect up to two desired peripherals while the device stays charged via the pogo pin contacts when docked. Power is supplied through the dock's 5.5mm DC power connector, while peripheral support is provided by the built-in dual USB Type-A cable. The dock also allows the tablet's scan function to work through the cut-out at the back, which also accommodates tablet accessories such as a scanner, hand strap and extended battery. This vehicle dock is compatible with RAM® 4-hole AMPS bases in C and D size and 75mm x 75mm VESA pattern bases for attaching a dual socket arm to complete your mounting solution. Go one step further with the built-in 2-hole mounting plate that is compatible with a RAM® 2-hole diamond base for mounting an additional device such as a phone or other handheld device. An included optional accessory bracket makes it possible to attach RAM® 2-hole diamond bases for device mounting and features a cable management system.

This RAM® EZ-Roll'r™ powered holder for the Samsung Tab Active5, Tab Active3 and 2 is designed to meet the demands of field workers in a variety of applications, including transport, outside sales, logistics, manufacturing and much more. Power and data synchronization are supplied to the device via GDS® pogo pins, while you benefit from this holder's dual USB-A port that supports up to two peripherals, making this the ideal, compact mounting solution for your mobile workstation. For security and theft prevention, this powered holder has a key lock. The stylus remains accessible while the device is docked. Included is a set of four nuts and bolts to attach the holder to RAM® components with the universal 4-hole AMPS pattern. This holder also has space on the back for a GDS® Hand-Stand™ attachment so you can effortlessly take your Tab Active5, 3 & 2 from your vehicle, to yourself, to your desk.

This key-lockable Power + Dual USB Type-A RAM® Dock for the Zebra ET60 & ET65 (RAM-HOL-ZE25PD2LU) is equipped with our patented 3-D Float™ docking connector. Charging is provided via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A dual USB Type-A pigtail connector is provided for adding up to two peripheral devices. Unique to this dock are the new self-aligning docking pads that surround the pogo pins and conform to the tablet when it is seated in the dock, for optimal contact and to prevent damage to the pins. Built for versatility in the field, this dock supports the device with or without the attachable Zebra keyboard and features a unique 2-in-1 lock that both secures the tablet and allows the keyboard to open and close independently. In addition, this dock is accessory-ready, compatible with the RAM® Vent-Temp™, RAM® Temp-Right™, RAM® NFC Extender, and two small device mounting zones on both the left and right sides of the dock. The ET6x is compatible with the Zebra hand strap and shoulder strap while seated in the RAM® dock. The cut-out on the left side of the dock provides easy access to the Zebra CAC reader with the ability to open and close the CAC reader cover. Complete the solution by building out your mount. These docks are RAM® Compatible™ and feature 75mm VESA or 4-hole AMPS patterns for adding a ball adapter. Take advantage of thousands of RAM® mounting components to build the perfect ET60/ET65 solution. These thoughtful features enable a mobile workforce across a wide range of industries, including field/utility services, public safety, construction and more.

This key-lockable Power + Dual USB Type-A RAM® Dock for the Zebra ET60 & ET65 (RAM-HOL-ZE25PD2HLU) is equipped with our patented 3-D Float™ docking connector. This dock has built-in heating elements that provide the necessary heat to prevent the pogo pins from seizing, so they can operate in wet and freezing environments. Charging capabilities are delivered via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A dual USB Type-A pigtail connector is provided for adding up to two peripherals. Specially for this dock are the new self-aligning docking pads that surround the pogo pins and form to the tablet when it is in the dock, for optimal contact and to prevent damage to the pins. Made for versatility in the field, this dock supports the device with or without the attachable Zebra keyboard and features a unique 2-in-1 lock that both secures the tablet and allows the keyboard to open and close independently. In addition, this dock is accessory-ready, compatible with the RAM® Vent-Temp™, RAM® Temp-Right™, RAM® NFC Extender, and two small device mounting zones on both the left and right sides of the dock. The ET6x is compatible with the Zebra hand strap and shoulder strap while in the RAM® dock. The recess on the left side of the dock provides easy access to the Zebra CAC reader with the ability to open and close the CAC reader flap. Complete the solution by assembling your holder. These docks are RAM® Compatible™ and equipped with 75mm VESA or 4-hole AMPS patterns for adding a ball adapter. Make use of thousands of RAM® mounting components to assemble the perfect ET60/ET65 solution. These thoughtful features enable a mobile workforce across a wide range of sectors in colder climates, including cold storage, fixed vehicle docking in commercial transport and utility services in sub-zero environments.

This lockable RAM® Dock with power and dual data (RAM-HOL-ZE22PD2LU) has a form-fit design specifically for the Zebra ET8x tablets. Built for versatility in the field, this dock supports the device with or without the Rugged Frame and is compatible with the optional Friction Hinge Rugged Keyboard. Connect up to two desired peripherals while keeping the device charged via the pogo pin contacts when the device is docked. Power is supplied by connecting to the dock's 5.5mm DC power port, while peripheral support is provided by the built-in dual USB Type-A cable. Thoughtfully designed, this dock also accommodates tablet expansions such as the Zebra Expansion Back, GDS® Roto-Mag™ and GDS® Hand-Stand™ ergonomic accessories. Brave the elements with options to expand your dock with temperature modules. The RAM® Temp-Right™ can be added to regulate heat in extremely cold environments, while the RAM® Vent-Temp™ uses the vehicle's A/C vents to direct warm or cold air to the ET8x. Go one step further by upgrading to an optional NFC Repeater module that extends the device's internal NFC reader. Combine this with the dock's built-in two-hole mounting plate, compatible with the RAM® two-hole diamond base, for mounting the NFC Repeater or another additional device such as a phone, scanner or printer.

With this RAM Power Caddy™ the power supply storage can be kept next to your laptop. Keep your laptop charged and also run extra peripherals such as printers, faxes etc., all with your own factory-supplied power supply or combinations of most aftermarket AC inverters, DC power supplies and/or AC/DC power adapters.

The RAM® Power Plate™ II magnetic mount with steel adhesive plates (RAP-300U) is a versatile magnetic mounting solution, designed for phones, microphones, GPS devices and other small electronics. With a strong rare-earth magnet with protective rubber holder, it holds your device securely in place and prevents scratches and slipping. Included are two steel plates with adhesive layer (1.5" x 2" rectangle and 0.75" round) that attach to the back of your device or case, allowing you to easily connect and disconnect quickly from the magnet. This magnetic ball adapter also integrates seamlessly with mounting systems that rely on magnetic attachment, offering you flexibility across a wide range of mounting set-ups.

The RAM® magnetic Power Plate™ III is designed to hold various devices, including radar detectors and mobile phones. The magnetic plate features two powerful rare-earth magnets, a composite holder and one metal adhesive plate. To mount your device to the magnet, you must attach the metal plate to the back of your device. Includes a rectangular metal plate of 50mm x 38mm x 0.08mm with adhesive layer on the back.

The RAM® Power-Grip™ II universal wedge holder (art. RAP-303U) is an original RAM Mounts mounting part for securely and vibration-free attaching devices.This part is part of the RAM® ball-and-socket system and helps to securely and vibration-free attach devices in vehicles, boats or work environments.Part of the RAM® ball-and-socket mounting systemFor secure attachment of devicesOriginal RAM Mounts part.

The RAM® Power-Grip™ scanner holder with magnetic Tough-Mag™ adapter (RAP-396-MAG88U) is a low-profile mounting solution for scanner guns that attaches to any ferrous metal surface. Thanks to the magnetic attachment, users can easily move this mounting solution between vehicles or locations. The RAM® Power-Grip™ holds 2D barcode scanners securely when not in use and offers easy removal so employees can scan items quickly. A unique open bottom design allows scanning while the scanner sits in the holder. The replaceable elastomer fins grip the scanner handle firmly for the most secure fit, and can easily be replaced when worn in busy work environments.

The RAP-396F-2U are replacement fins for the RAP-396U. The replaceable elastomer fins grip the handle of the scanner firmly for the most secure fit and can easily be replaced if needed.

The RAP-450F-2U are replacement fins for the RAP-450U. The replaceable elastomer fins firmly grip the handle of the scanner for the most secure fit and can be easily replaced when needed.

The RAM® powered dock + single USB-A for Zebra MC3300/3400/3450 (RAM-HOL-ZE33PDU) features a form-fit holder specifically designed for the Zebra MC3300/MC3400/MC3450 Mobile Computer Series. Charging capabilities are provided via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A single peripheral allows connection to one (1) input device. This holder comes with a shim for a secure fit for the MC3400 & MC3450 and is designed for easy one-handed placement of the device. Complete the solution by assembling your holder—these docks are RAM® Compatible™ and equipped with a 2-hole AMPS pattern for adding a ball adapter. Assemble your perfect MC3300/MC3400/MC3450 mount by making use of thousands of RAM® mounting components.

The RAM® powered dock + single USB-A for Zebra MC9400/MC9300 Series (RAM-HOL-ZE32PDU) features a form-fit holder specifically designed for the Zebra MC9400/MC9300 Ultra-Rugged Mobile Computer Series. Charging is delivered via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A single peripheral connection allows one (1) input device to be connected. This holder includes optional spacers to provide a snug fit for devices used without the Protective Boot and is designed for easy, one-handed placement of the device. Complete the solution by building your mount — these docks are RAM® Compatible™ and equipped with a 2-hole AMPS pattern for adding a ball adapter. Depending on the intended application and thanks to the device's rotating touchscreen, mount in one of the two recommended orientations (see above). Build your perfect MC9400/MC9300 holder by making use of thousands of RAM® mounting components.

The RAM® powered dock + single USB-A for Zebra MC9400/MC9300 Series - heated pins (RAM-HOL-ZE32PDHU) features a form-fit holder specifically designed for the Zebra MC9400/MC9300 Ultra-Rugged Mobile Computer Series. This dock has built-in heating elements that provide the necessary warmth to prevent the pogo pins from seizing, so they can operate in wet and freezing environments. Charging is delivered via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A single peripheral connection allows one (1) input device to be connected. This holder includes optional spacers to provide a snug fit for devices used without the Protective Boot and is designed for easy, one-handed placement of the device. Complete the solution by building your mount — these docks are RAM® Compatible™ and equipped with a 2-hole AMPS pattern for adding a ball adapter. Depending on the intended application and thanks to the device's rotating touchscreen, mount in one of the two recommended orientations (see above). Build your perfect MC9400/MC9300 holder by making use of thousands of RAM® mounting components.

This spring-loaded dock with power + data (RAM-HOL-ZE26PDU) features a form-fit design specific to the Zebra TC8300. Charging is delivered via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A single peripheral connection allows one (1) input device to be connected. Thoughtfully designed for easy, one-handed placement of the device. Complete the solution by building your mount — these docks are RAM® Compatible™ and equipped with a 2-hole AMPS pattern for adding a diamond ball adapter. Make use of thousands of RAM® mounting components to build the perfect TC8300 solution.

This spring-loaded dock with power + data and heated pogo pins (RAM-HOL-ZE26PDHU) features a form-fit design specific to the Zebra TC8300. This dock has built-in heating elements that provide the necessary warmth to prevent the pogo pins from seizing, so they can operate in wet and freezing environments. Charging is delivered via a 5.5mm DC barrel pigtail connector and built-in pogo pin docking contacts for a seamless charging experience. A single peripheral connection allows one (1) input device to be connected. Thoughtfully designed for easy, one-handed placement of the device. Complete the solution by building your mount — these docks are RAM® Compatible™ and equipped with a 2-hole AMPS pattern for adding a diamond ball adapter. Make use of thousands of RAM® mounting components to build the perfect TC8300 solution.

The RAM® Powered Dock + USB-A for Honeywell CT40/45/47 (RAM-HOL-HON12PDU) is a spring-loaded, form-fit powered dock that allows workers to secure and charge their Honeywell device. Power to the device is supplied via a 1m female 5.5mm DC barrel connector and supports one peripheral via a USB-A female connector. This dock features an integrated stylus holder that clicks your stylus into place when not in use and is designed to support OEM accessories such as the hand strap. The upper cup of the holder has a cut-out so workers can use the device's scanner while docked. This holder comes with optional inserts to support devices with or without the protective rubber boot. Complete your solution by adding a compatible RAM® 2-hole AMPS pattern diamond base and double ball mount, for a wide range of mounting options (mounting hardware included).

The RAM® Powered Dock + USB-A for Honeywell CT40/45/47 - Heated Pins (RAM-HOL-HON12PDHU) is a spring-loaded, form-fit powered dock that allows workers to secure and charge their Honeywell device. Power to the device is supplied via a 1m female 5.5mm DC barrel connector and supports one peripheral via a USB-A female connector. This dock features an integrated stylus holder that clicks your stylus into place when not in use and is designed to support OEM accessories such as the hand strap. The upper cup of the holder has a cut-out so workers can use the device's scanner while docked. This holder comes with optional inserts to support devices with or without the protective rubber boot. Take on rugged, freezing environments with heated pogo pins integrated into the dock for a secure connection and to prevent the pins from seizing up due to ice. Complete your solution by adding a compatible RAM® 2-hole AMPS pattern diamond base and double ball mount, for a wide range of mounting options (mounting hardware included).

The RAM® Powered Dock for Honeywell CT40/45/47 (RAM-HOL-HON12PU) is a spring-loaded, form-fit powered dock that allows workers to secure and charge their Honeywell device. Power to the device is supplied via a 1m female 5.5mm DC barrel connector. This dock features an integrated stylus holder that clicks your stylus into place when not in use and is designed to support OEM accessories such as the hand strap. The upper cup of the holder has a cut-out so workers can use the device's scanner while docked. This holder comes with optional inserts to support devices with or without the protective rubber boot. Complete your solution by adding a compatible RAM® 2-hole AMPS pattern diamond base and double ball mount, for a wide range of mounting options (mounting hardware included).