Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® Tough-Strap™ handlebar ball base

RAM® Tough-Strap™ handlebar ball base

The RAM® Tough-Strap™ is the most compact rugged mounting solution for any bicycle or motorcycle handlebar. With two different strap sizes you easily install the RAM® Tough-Strap™ on any mountain bike, road bike or e-bike with a simple turn of a knob. This RAM® Tough-Strap™ handlebar holder features a B-size ball base so you can attach any RAM® B-size socket arm and the desired device holder to complete your solution. The long strap is used for handlebar diameters of 1.25"-1.38", while the short strap is used for diameters of 0.875"-1". Use the extra rubber strip to cut to size for the 1"-1.125" diameter range for a more custom fit. Take the RAM® Tough-Strap™ with you on your next adventure, on and off the road.

36,05 €*incl. VAT

29,79 €excl. VAT

Více informací

RAM® Tough-Track™ - 15" rail for 1 3/4" - 2" rails

RAM® Tough-Track™ - 15" rail for 1 3/4" - 2" rails

With the RAM® Tough-Track™ for tubes, bars and rails you create an ideal mounting surface that is compatible with a wide range of RAM® Track Ball™ holders and components. This 18" RAM® Tough-Track™ features an AMPS hole pattern with two holes on the side for attaching a RAM® diamond base. All the U-bolt hardware needed is included to mount the RAM® Tough-Track™ on tubes, bars and rails of 1 3/4" and 2". Hardware for mounting on a tube, bar or rail of 2 1/4" or 2 5/8" is available separately. Other options for mounting on irregularly shaped rails include the RAM® strap clamp holders.

68,45 €*incl. VAT

56,57 €excl. VAT

Více informací

RAM® Tough-Track™ - 15" Rail for 5/8" - 1 1/4" Rails

RAM® Tough-Track™ - 15" Rail for 5/8" - 1 1/4" Rails

With the RAM® Tough-Track™ for pipes, rods and rails you create an ideal mounting surface compatible with a wide range of RAM® Track Ball™ holders and components. This 18" RAM® Tough-Track™ has a 2-hole AMPS hole pattern on the side for attaching a RAM® diamond base. All the required U-bolt hardware is included to attach the RAM® Tough-Track™ to pipes, rods and rails from 5/8" to 1 1/4". Hardware for mounting to a pipe, rod or rail of 1 1/2" is available separately. Other options for attaching to irregularly shaped rails include the RAM® Torque™ and the strap clamp.

51,67 €*incl. VAT

42,70 €excl. VAT

Více informací

RAM® Tough-Track™ - 15" track for rails

RAM® Tough-Track™ - 15" track for rails

With the RAM® Tough-Track™ for tubes, rods and rails you create an ideal track mounting surface that is compatible with a wide range of RAM® Track Ball™ holders and components. This 18" RAM® Tough-Track™ features a 2-hole AMPS hole pattern on the side for attaching a RAM® diamond base. This version does not include the required hardware for mounting the RAM® Tough-Track™. Combine with your choice of hardware, including U-bolt and hose clamp options.

55,87 €*incl. VAT

46,17 €excl. VAT

Více informací

RAM® Tough-Track™ - 4" Rail for 1 1/4" - 1 1/2" Rails

RAM® Tough-Track™ - 4" Rail for 1 1/4" - 1 1/2" Rails

With the RAM® Tough-Track™ for pipes, rods and rails you create an ideal mounting surface compatible with a wide range of RAM® Track Ball™ holders and components. This 4" RAM® Tough-Track™ includes all the required U-bolt hardware to attach the RAM® Tough-Track™ to pipes, rods and rails from 1.25" to 1.5" – ideal for the most common roll cages of Side By Sides. The total length of this rail holder is 7" with 4" of usable rail to mount phones, tablets, action cameras and more.

38,07 €*incl. VAT

31,46 €excl. VAT

Více informací

RAM® Tough-Track™ - 4" rail for 5/8" - 1 1/4" rails

RAM® Tough-Track™ - 4" rail for 5/8" - 1 1/4" rails

With the RAM® Tough-Track™ for tubes, bars and rails you create an ideal mounting surface that is compatible with a wide range of RAM® Track Ball™ holders and components. This 7" RAM® Tough-Track™ features an AMPS hole pattern with two holes on the side for attaching a RAM® diamond base. All the U-bolt hardware needed is included to mount the RAM® Tough-Track™ on tubes, bars and rails from 5/8" to 1 1/4". Hardware for mounting on a tube, bar or rail of 1 1/2" is available separately. Other options for mounting on irregularly shaped rails include the RAM® Torque™ and the strap clamp.

40,46 €*incl. VAT

33,44 €excl. VAT

Více informací

RAM® Tough-Track™ - 4" rail for rails

RAM® Tough-Track™ - 4" rail for rails

With the RAM® Tough-Track™ for tubes, bars and rails you create an ideal mounting surface that is compatible with a wide range of RAM® Track Ball™ holders and components. This 7" RAM® Tough-Track™ features an AMPS hole pattern with two holes on the side for attaching a RAM® diamond base. This version does not include the hardware required to mount the RAM® Tough-Track™. Combine it with the mounting hardware of your choice, including U-bolt and hose clamp options.

31,46 €*incl. VAT

26,00 €excl. VAT

Více informací

RAM® Tough-Track™ - 4" track for 1 3/4" - 2" rails

RAM® Tough-Track™ - 4" track for 1 3/4" - 2" rails

With the RAM® Tough-Track™ for tubes, rods and rails you create an ideal track mounting surface that is compatible with a wide range of RAM® Track Ball™ holders and components. This 7" RAM® Tough-Track™ features a 2-hole AMPS hole pattern on the side for attaching a RAM® diamond base. All the necessary U-bolt hardware is included to attach the RAM® Tough-Track™ to tubes, rods and rails of 1 ¾" and 2". Hardware for attaching to a tube, rod or rail of 2 ¼" or 2 5/8" is available separately. Other options for attaching to irregularly shaped rails include RAM® strap clamp holders.

44,10 €*incl. VAT

36,45 €excl. VAT

Více informací

RAM® Tough-Track™ - 9" rail for 1 1/4" - 1 1/2" rails

RAM® Tough-Track™ - 9" rail for 1 1/4" - 1 1/2" rails

With the RAM® Tough-Track™ for tubes, bars and rails you create an ideal mounting surface that is compatible with a wide range of RAM® Track Ball™ holders and components. This 9" RAM® Tough-Track™ includes all the U-bolt hardware needed to mount the RAM® Tough-Track™ on tubes, bars and rails from 1.25" to 1.5" – ideal for the most common roll cages of Side By Sides. The overall length of this rail holder is 12" with 9" of usable rail to mount phones, tablets, action cameras and more.

42,97 €*incl. VAT

35,51 €excl. VAT

Více informací

RAM® Tough-Track™ - 9" Rail for 1 3/4" - 2" Rails

RAM® Tough-Track™ - 9" Rail for 1 3/4" - 2" Rails

With the RAM® Tough-Track™ for pipes, rods and rails you create an ideal mounting surface compatible with a wide range of RAM® Track Ball™ holders and components. This 12" RAM® Tough-Track™ has a 2-hole AMPS hole pattern on the side for attaching a RAM® diamond base. All the required U-bolt hardware is included to attach the RAM® Tough-Track™ to pipes, rods and rails of 1 3/4" and 2". Hardware for mounting to a pipe, rod or rail of 2 1/4" or 2 5/8" is available separately. Other options for attaching to irregularly shaped rails include the RAM® strap clamp holders.

52,85 €*incl. VAT

43,68 €excl. VAT

Více informací

RAM® Tough-Track™ - 9" Rail for 5/8" - 1 1/4" Rails

RAM® Tough-Track™ - 9" Rail for 5/8" - 1 1/4" Rails

With the RAM® Tough-Track™ for pipes, rods and rails you create an ideal mounting surface compatible with a wide range of RAM® Track Ball™ holders and components. This 12" RAM® Tough-Track™ has a 2-hole AMPS hole pattern on the side for attaching a RAM® diamond base. All the required U-bolt hardware is included to attach the RAM® Tough-Track™ to pipes, rods and rails from 5/8" to 1 1/4". Hardware for mounting to a pipe, rod or rail of 1 1/2" is available separately. Other options for attaching to irregularly shaped rails include the RAM® Torque™ and the strap clamp.

45,16 €*incl. VAT

37,32 €excl. VAT

Více informací

RAM® Tough-Track™ - 9" Rail for Rails

RAM® Tough-Track™ - 9" Rail for Rails

With the RAM® Tough-Track™ for pipes, rods and rails you create an ideal mounting surface compatible with a wide range of RAM® Track Ball™ holders and components. This 12" RAM® Tough-Track™ has a 2-hole AMPS hole pattern on the side for attaching a RAM® diamond base. This version does not include the required hardware to mount the RAM® Tough-Track™. Combine with the hardware of your choice, including U-bolt and hose clamp options.

40,00 €*incl. VAT

33,06 €excl. VAT

Více informací

RAM® Tough-Track™ - Composite 12" Rail with End Loading

RAM® Tough-Track™ - Composite 12" Rail with End Loading

The extruded composite Tough-Track™ is your cost-efficient rail mounting solution. This version of the Tough-Track uses no end caps and has a tapered end for effortless sliding of rail accessories in and out. The hardware sits in a recessed channel so the T-bolt does not get stuck when sliding along the rail. Thanks to the pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included.

13,19 €*incl. VAT

10,90 €excl. VAT

Více informací

RAM® Tough-Track™ - Composite 16" Rail with End Loading

RAM® Tough-Track™ - Composite 16" Rail with End Loading

The extruded composite Tough-Track™ is your cost-efficient rail mounting solution. This version of the Tough-Track uses no end caps and has a tapered end for effortless sliding of rail accessories in and out. The hardware sits in a recessed channel so the T-bolt does not get stuck when sliding along the rail. Thanks to the pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included.

14,53 €*incl. VAT

12,01 €excl. VAT

Více informací

RAM® Tough-Track™ - composite 16" rail with top loading

RAM® Tough-Track™ - composite 16" rail with top loading

With the RAM Tough-Track the mounting possibilities on flat surfaces are virtually endless for ATVs, cars, combine harvesters, motorboats, tractors, trucks and more. This rail solution can be bolted to any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide range of RAM rail bases to mount devices such as action cameras, fishing rods, phones and tablets.

20,22 €*incl. VAT

16,71 €excl. VAT

Více informací

RAM® Tough-Track™ - Composite 2.43" Rail with Top Loading

RAM® Tough-Track™ - Composite 2.43" Rail with Top Loading

With the RAM Tough-Track the mounting possibilities on flat surfaces are virtually endless for ATVs, cars, combine harvesters, motorboats, tractors, trucks and more. This rail solution can be screwed onto any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide range of RAM rail bases to mount devices such as action cameras, fishing rods, phones and tablets.

11,91 €*incl. VAT

9,84 €excl. VAT

Více informací

RAM® Tough-Track™ - composite 20" rail with end loading

RAM® Tough-Track™ - composite 20" rail with end loading

The extruded composite Tough-Track™ is your cost-effective rail mounting solution. This version of the Tough-Track does not use end caps and has a tapered end for effortlessly sliding rail accessories in and out. The hardware sits in a recessed channel so the T-bolt does not get stuck when sliding along the rail. Thanks to the pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included.

17,01 €*incl. VAT

14,06 €excl. VAT

Více informací

RAM® Tough-Track™ - Composite 3" Rail with End Loading

RAM® Tough-Track™ - Composite 3" Rail with End Loading

The extruded composite Tough-Track™ is your cost-efficient rail mounting solution. This version of the Tough-Track uses no end caps and has a tapered end for effortless sliding of rail accessories in and out. The hardware sits in a recessed channel so the T-bolt does not get stuck when sliding along the rail. Thanks to the pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included.

9,00 €*incl. VAT

7,44 €excl. VAT

Více informací

RAM® Tough-Track™ - Composite 3" Rail with Top Loading

RAM® Tough-Track™ - Composite 3" Rail with Top Loading

With the RAM Tough-Track the mounting possibilities on flat surfaces are virtually endless for ATVs, cars, combine harvesters, motorboats, tractors, trucks and more. This rail solution can be screwed onto any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide range of RAM rail bases to mount devices such as action cameras, fishing rods, phones and tablets.

12,22 €*incl. VAT

10,10 €excl. VAT

Více informací

RAM® Tough-Track™ - composite 30" rail with end loading

RAM® Tough-Track™ - composite 30" rail with end loading

The extruded composite Tough-Track™ is your cost-effective rail mounting solution. This version of the Tough-Track does not use end caps and has a tapered end for effortlessly sliding rail accessories in and out. The hardware sits in a recessed channel so the T-bolt does not get stuck when sliding along the rail. Thanks to the pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included.

49,82 €*incl. VAT

41,17 €excl. VAT

Více informací

RAM® Tough-Track™ - Composite 38" Rail with End Loading

RAM® Tough-Track™ - Composite 38" Rail with End Loading

The extruded composite Tough-Track™ is your cost-efficient rail mounting solution. This version of the Tough-Track uses no end caps and has a tapered end for effortless sliding of rail accessories in and out. The hardware sits in a recessed channel so the T-bolt does not get stuck when sliding along the rail. Thanks to the pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included.

52,14 €*incl. VAT

43,09 €excl. VAT

Více informací

RAM® Tough-Track™ - composite 4" rail with end loading

RAM® Tough-Track™ - composite 4" rail with end loading

The extruded composite Tough-Track™ is your cost-effective rail mounting solution. This version of the Tough-Track does not use end caps and has a tapered end for effortlessly sliding rail accessories in and out. The hardware sits in a recessed channel so the T-bolt does not get stuck when sliding along the rail. Thanks to the pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included.

9,22 €*incl. VAT

7,62 €excl. VAT

Více informací

RAM® Tough-Track™ - Composite 5" Rail with Top Loading

RAM® Tough-Track™ - Composite 5" Rail with Top Loading

With the RAM Tough-Track the mounting possibilities on flat surfaces are virtually endless for ATVs, cars, combine harvesters, motorboats, tractors, trucks and more. This rail solution can be screwed onto any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide range of RAM rail bases to mount devices such as action cameras, fishing rods, phones and tablets.

15,25 €*incl. VAT

12,60 €excl. VAT

Více informací

RAM® Tough-Track™ - composite 8" rail with end loading

RAM® Tough-Track™ - composite 8" rail with end loading

The extruded composite Tough-Track™ is your cost-effective rail mounting solution. This version of the Tough-Track does not use end caps and has a tapered end for effortlessly sliding rail accessories in and out. The hardware sits in a recessed channel so the T-bolt does not get stuck when sliding along the rail. Thanks to the pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included.

11,28 €*incl. VAT

9,32 €excl. VAT

Více informací