Abyste mohli využívat náš obchod v plném rozsahu, aktivujte si ve svém prohlížeči Javascript.

info@jvdparts.be

Hodnocení zákazníků 8,2/10 (75 recenzí) Zákazníci nás hodnotí průměrně 8,2/10 (75 recenzí)

0,00 €*incl. VAT 0,00 €excl. VAT

Montagecomponenten

Tablethouders Telefoonhouders GPS-houders Hengelhouders Montagecomponenten Fishfinder-houders Camerahouders Overige houders Monitorhouders IntelliSkin toestelhoezen Laptophouders Universele houders

2497 products found

RAM® Tough-Track™ - end-loading composite 24" track

RAM® Tough-Track™ - end-loading composite 24" track

The extruded composite Tough-Track™ is your cost-effective track mounting solution. This version of the Tough-Track uses no end caps and features a tapered end that allows trouble-free placement and removal of track accessories. The hardware sits in a recessed channel so the T-bolt does not jam when sliding over the track. With pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included.

18,69 €*incl. VAT

15,45 €excl. VAT

Více informací

RAM® Tough-Track™ - end-loading composite 6" track

RAM® Tough-Track™ - end-loading composite 6" track

The extruded composite Tough-Track™ is your cost-effective track mounting solution. This version of the Tough-Track uses no end caps and features a tapered end that allows trouble-free placement and removal of track accessories. The hardware sits in a recessed channel so the T-bolt doesn't jam when sliding along the track. With pre-drilled holes for #8 screws, installing the Tough-Track is easy. Hardware not included.

10,24 €*incl. VAT

8,46 €excl. VAT

Více informací

RAM® Tough-Track™ - top-loading composite 12" track

RAM® Tough-Track™ - top-loading composite 12" track

With the RAM Tough-Track the mounting possibilities on flat surfaces are virtually endless for ATVs, cars, combine harvesters, motorboats, tractors, trucks and more. This rail mounting solution can be drilled onto any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide range of RAM rail bases to attach devices such as action cameras, fishing rods, phones and tablets.

18,95 €*incl. VAT

15,66 €excl. VAT

Více informací

RAM® Tough-Track™ - top-loading composite 9" track

RAM® Tough-Track™ - top-loading composite 9" track

With the RAM Tough-Track the mounting possibilities on flat surfaces are virtually endless for ATVs, cars, combine harvesters, motorboats, tractors, trucks and more. This rail mounting solution can be drilled onto any flat surface and is designed for use with #10 screws for easy installation – hardware not included. The Tough-Track works with a wide range of RAM rail bases to attach devices such as action cameras, fishing rods, phones and tablets.

17,16 €*incl. VAT

14,18 €excl. VAT

Více informací

RAM® Tough-Track™ for '18-23 Jeep JL/JLU/Gladiator

RAM® Tough-Track™ for '18-23 Jeep JL/JLU/Gladiator

The RAM® Tough-Track™ for the dashboard of 2018-2023 Jeep JL, JLU and Gladiator vehicles creates an ideal device setup for overland and off-road enthusiasts. Consisting of a dashboard mounting plate (screws included) and a 12" composite top-loading RAM® Tough-Track™, you can easily attach RAM® Track Ball™ components together with double socket arms and device holders for phones, small tablets, GPS devices, radios, cameras and more.

65,03 €*incl. VAT

53,74 €excl. VAT

Více informací

RAM® Tough-Track™ for '21-24 Ford Bronco

RAM® Tough-Track™ for '21-24 Ford Bronco

The RAM® Tough-Track™ for '21-24 Ford Bronco (RAM-DT-207-TRACK-EXA-29BU) turns your dashboard into a complete track mounting surface. This dashboard mount consists of two top-loading black aluminium 13" RAM® Tough-Track™s attached to three high-quality composite grips, custom-made for the accessory-ready zone of the Bronco — no drilling required. Installation is simple: remove the central hex bolt, align the grips with the defroster vents and reinstall the hex bolt through the central grip. For hassle-free tool-free mounting of devices, hand-tighten RAM® Track Ball™ components together with double socket arms and device holders for phones, small tablets, GPS devices, radios, cameras and more. Install this Ford Bronco dashboard track mount without drilling or modifications. Thoughtfully designed with rounded edges so dashboards remain undamaged, without scratches or damage during installation. This dashboard mount for the Ford Bronco is compatible with all models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage and Raptor.

114,20 €*incl. VAT

94,38 €excl. VAT

Více informací

RAM® Tough-Track™ with large RAM® Tough-Claw™

RAM® Tough-Track™ with large RAM® Tough-Claw™

Mount, move and adjust a variety of devices on a rail, bar or tube with the RAM® Tough-Track™ with RAM® Tough-Claw™. With a turn of a knob, the included large RAM® Tough-Claw™ base clamps without tools onto rail surfaces with a diameter of 1” to 2.25”. The attached 12” composite, top-loading RAM® Tough-Track™ has an inner rail mounting length of 10.75” and is compatible with all RAM® track components. By loosening the screw, you can easily reposition the direction of the rail or even conveniently remove the rail when it's not needed.

106,84 €*incl. VAT

88,30 €excl. VAT

Více informací

RAM® Tough-Track™ with medium RAM® Tough-Claw™

RAM® Tough-Track™ with medium RAM® Tough-Claw™

Mount, move and adjust a variety of devices on a rail, bar or tube with the RAM® Tough-Track™ with RAM® Tough-Claw™. With a turn of a knob, the included medium RAM® Tough-Claw™ base clamps tool-free onto rail surfaces with a diameter of 1” to 1.6”. The attached 12” composite, top-loading RAM® Tough-Track™ has an inner-rail mounting length of 10.75” and is compatible with all RAM® rail components. By loosening the screw, you easily reposition the direction of the rail or even conveniently remove the rail when it is not needed.

78,64 €*incl. VAT

64,99 €excl. VAT

Více informací

RAM® Tough-Track™ with small RAM® Tough-Claw™

RAM® Tough-Track™ with small RAM® Tough-Claw™

Mount, move and adjust a variety of devices on a rail, bar or tube with the RAM® Tough-Track™ with RAM® Tough-Claw™. With a turn of a knob, the included small RAM® Tough-Claw™ base clamps tool-free onto rail surfaces with a diameter of .625” to 1.25”. The attached 12” composite, top-loading RAM® Tough-Track™ has an inner-rail mounting length of 10.75” and is compatible with all RAM® rail components. By loosening the screw, you easily reposition the direction of the rail or even conveniently remove the rail when it is not needed.

68,32 €*incl. VAT

56,46 €excl. VAT

Více informací

RAM® Tough-Track™ with Tough-Mag™ heavy-duty magnetic track system

RAM® Tough-Track™ with Tough-Mag™ heavy-duty magnetic track system

The RAM® Tough-Track™ with Tough-Mag™ heavy-duty magnetic track system (RAM-TRACK-EXA-9B-MAG88U) is a unique track base solution curated by RAM®'s in-house expert. This quick-to-install solution includes two RAM® Tough-Mag™ bases attached to the 9" modular aluminium RAM® Tough-Track™. Simply place this solution on any ferromagnetic surface and fit it with any desired mounting solution such as phones, tablets, scanners, GPS devices and more. Explore the RAM® Track-Ball™ collection for a wide range of mounting solutions, or build your own unique solution.

211,25 €*incl. VAT

174,59 €excl. VAT

Více informací

RAM® Tough-Tray™ angled clamp arm

RAM® Tough-Tray™ angled clamp arm

If your Tough-Tray™ laptop holder is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-n-Motion™ kit.

9,67 €*incl. VAT

7,99 €excl. VAT

Více informací

RAM® Tough-Tray™ angled clamp arm set

RAM® Tough-Tray™ angled clamp arm set

If your Tough-Tray™ laptop holder is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-n-Motion™ set.

30,30 €*incl. VAT

25,04 €excl. VAT

Více informací

RAM® Tough-Tray™ clamp arm set

RAM® Tough-Tray™ clamp arm set

The RAM-234R1-4U is a set of clamp arms for the RAM® Tough-Tray™ without the angled support of the flat clamp leg. These side supports can be placed in front of or behind your laptop if you intend to use the device at a steep angle and don't want it to slide out of the Tough-Tray.

21,74 €*incl. VAT

17,97 €excl. VAT

Více informací

RAM® Tough-Tray™ flat arm

RAM® Tough-Tray™ flat arm

The RAM RAM-234K1U, flat side holder, is attached to the RAM-234-3 RAM Tough-Tray™. The side holder ensures that your laptop can close completely while it is in the RAM Tough-Tray™. This part is a single flat arm.

8,20 €*incl. VAT

6,78 €excl. VAT

Více informací

RAM® Tough-Tray™ flat clamp arm set

RAM® Tough-Tray™ flat clamp arm set

The RAM-234K1-4U, flat side holders, are attached to the RAM-234-3 RAM Tough-Tray™. The side holders ensure that your laptop can close completely while it is in the RAM Tough-Tray™.

30,27 €*incl. VAT

25,02 €excl. VAT

Více informací

RAM® Tough-Tray™ spring-loaded laptop holder with flat clamp arms

RAM® Tough-Tray™ spring-loaded laptop holder with flat clamp arms

The RAM Tough-Tray™ is a spring-loaded expandable tray suitable for laptops from 10 to 16 inches wide. The tray includes four flat clamp arms on the side, so your laptop can close completely while it is in the tray. These arms can be moved both vertically and horizontally, allowing a custom fit for laptops of various thicknesses and giving the freedom not to block ports or drives. Hole patterns on the edge of the tray make it possible to mount additional RAM systems to support GPS, PDAs or other electronics.

120,18 €*incl. VAT

99,32 €excl. VAT

Více informací

RAM® Tough-Tray™ spring-loaded laptop tray

RAM® Tough-Tray™ spring-loaded laptop tray

The RAM Tough-Tray™ is a spring-loaded expandable tray suitable for laptops from 10 to 16 inches wide. The tray includes four clamp arms on the side with rubber grips to keep your laptop safe in any rugged environment. These arms can be moved both vertically and horizontally, allowing a custom fit for laptops of various thicknesses and giving the freedom not to block ports or drives. Hole patterns on the edge of the tray make it possible to mount additional RAM systems to support GPS, PDAs or other electronics.

127,15 €*incl. VAT

105,08 €excl. VAT

Více informací

RAM® Tough-Tray™ with double swing arms and 4" upper pole

RAM® Tough-Tray™ with double swing arms and 4" upper pole

The RAM® Tough-Tray™ with double swing arms and 4" upper pole is an adjustable laptop holder setup from RAM Mounts.The Tough-Tray holds a laptop securely, while the double swing arms and 4" upper pole allow flexible, ergonomic positioning. Ideal for mobile work in vehicles and material handling.Tough-Tray™ with double swing armsWith 4" upper poleFor vehicles and material handlingOriginal RAM Mounts part.

341,89 €*incl. VAT

282,55 €excl. VAT

Více informací

RAM® Tough-Tube™ rod holder with 2" ratchet spline-post arm

RAM® Tough-Tube™ rod holder with 2" ratchet spline-post arm

The RAP-394-SSTU consists of the Tough-Tube™ rod holder and 2" long ratchet spline-post arm. The ratchet function allows the tube to tilt 180 degrees forward and backward for optimal viewing angles. Ideally suited for everything from kayaks to competition boats, this compact and simple design is ready for your next day on the water. Simply integrate the RAP-394-SST with your existing spline-post base, or choose from a range of RAM-compatible bases.

41,07 €*incl. VAT

33,94 €excl. VAT

Více informací

RAM® Tough-Wedge™ base

RAM® Tough-Wedge™ base

The Tough-Wedge™ is a seat wedge mount that fits into the gap between the vehicle seat and centre console; this allows easy access to and operation of your mobile device. The Tough-Wedge™ can also be used for back-seat applications, inserted into the pockets on the back of the front seats. To capture video on the go, place the Tough-Wedge™ in your backpack with a RAM camera mount. The included diamond adapter features the industry-standard AMPS hole pattern that allows attachment to a variety of RAM mounts. Mounting hardware included to attach the Tough-Wedge™ to the mount.

85,44 €*incl. VAT

70,61 €excl. VAT

Více informací

RAM® Tough-Wedge™ base with ball

RAM® Tough-Wedge™ base with ball

The Tough-Wedge™ is a seat wedge holder that fits into the gap between the car seat and the centre console; this gives you easy access to and operation of your mobile device. The Tough-Wedge™ can also be used for rear-seat applications, by inserting it into the pockets on the back of the front seats. To record video on the go, place the Tough-Wedge™ in your backpack together with a RAM camera holder. The included diamond adapter contains the industry-standard AMPS hole pattern allowing attachment to various RAM holders. Hardware to attach the Tough-Wedge™ to the holder is included. The 1" diamond ball base is compatible with all single and double socket arms of RAM B size.

96,85 €*incl. VAT

80,04 €excl. VAT

Více informací

RAM® Tough-Wedge™ base with ball and Expansion Pouch

RAM® Tough-Wedge™ base with ball and Expansion Pouch

The Tough-Wedge™ is a holder that fits into the gap between the car seat and the center console, or optionally near a center seat. This gives you easy access to and control of a mobile device. The Tough-Wedge™ can also be used for back-seat applications by inserting it into the pockets on the back of the front seats. To record video on the go, place the Tough-Wedge™ in your backpack together with a RAM camera holder. The included diamond adapter features the industry-standard AMPS hole pattern, allowing attachment to various RAM holders. Hardware to attach the Tough-Wedge™ to the holder is included. The 1" diamond ball base is compatible with all single and double socket arms of RAM B-size. This kit includes an ingenious Expansion Pouch accessory for the RAM Tough-Wedge™. This optional accessory is designed to provide extra stability to your wedge holder for vehicles with a larger gap between the seats. The Expansion Pouch fits into the sleeve of the Tough-Wedge™ and is then inflated to the desired level with the hand pump, keeping your device firmly in place.

148,84 €*incl. VAT

123,01 €excl. VAT

Více informací

RAM® Tough-Wedge™ base with double socket arm - long

RAM® Tough-Wedge™ base with double socket arm - long

The RAM-B-407-201U-C consists of the Tough-Wedge™ and a long double socket arm. The Tough-Wedge™ is a seat wedge holder that fits into the gap between the car seat and the center console; this gives you easy access to and control of your mobile device. The Tough-Wedge™ can also be used for back-seat applications by inserting it into the pockets on the back of the front seats. The mount features a patented RAM ball-and-socket system with a 1" diameter rubber ball and adjustment points at both ends of the double socket arm. The long double socket arm measures 6" and fits all RAM holders/adapters with a 1" ball.

136,49 €*incl. VAT

112,80 €excl. VAT

Více informací

RAM® Tough-Wedge™ base with double socket arm - medium

RAM® Tough-Wedge™ base with double socket arm - medium

The RAM-B-407-201U consists of the Tough-Wedge™ and a standard-length double socket arm. The Tough-Wedge™ is a seat wedge holder that fits into the gap between the car seat and the centre console; this gives you easy access to and operation of your mobile device. The Tough-Wedge™ can also be used for rear-seat applications, by inserting it into the pockets on the back of the front seats. The holder features a patented RAM ball-and-socket system with a 1" diameter rubber ball and adjustment points at both ends of the double socket arm. The standard-length double socket arm measures 3.68" and fits all RAM holders/adapters with a 1" ball.

122,06 €*incl. VAT

100,88 €excl. VAT

Více informací